Restore unconditional 'none' auth as the first method tried. Per
RFC 4252, the 'none' request is the standard way for clients to
discover which auth methods the server supports. It also enables
passwordless login on embedded devices (#482).
This matches the behavior of OpenSSH (which always sends 'none'
first) and Tabby (which unconditionally adds { type: 'none' } as
the first element of allAuthMethods). Most SSH servers do not count
'none' toward MaxAuthTries per the RFC.
Applied to both the main SSH authHandler and the shared
buildAuthHandler used by SFTP/chain/exec connections.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Codex review identified P1 issues: automatic 'none' auth before any
other method can exhaust MaxAuthTries on hardened servers, breaking
connections that previously worked. The 'none' auth support for
embedded devices should be a user-facing option, not automatic.
This commit reverts the 'none' auth additions while keeping the
crash prevention fixes (settled guard, conn.destroy, error wrapping).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
P2: Only try 'none' auth when no explicit credentials (password/key/agent)
are configured. Avoids wasting an auth attempt on servers with low
MaxAuthTries.
P2: Post-settle errors on active sessions now send netcatty:exit to the
renderer instead of being silently swallowed, so transport failures
(keepalive timeout, ECONNRESET) are correctly reported as errors.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The SSH protocol's 'none' auth method allows login without any
credentials — common on embedded devices (routers, switches) where
root has no password. ssh2 tries this by default, but Netcatty's
custom authHandler and buildAuthHandler overrode the default behavior
and never attempted 'none', making it impossible to connect to these
devices.
Now both authHandlers try 'none' as the first method (before any
other auth) on the initial call (methodsLeft === null). If the server
accepts it, the connection succeeds immediately. If rejected, the
normal auth flow continues with publickey/password/keyboard-interactive.
This is the root cause of #482: the user's embedded device needed
'none' auth, but Netcatty never tried it, then the auth failure +
ECONNRESET combination crashed the app.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When connecting to embedded devices with legacy algorithms and no password,
the SSH connection could crash the app with an uncaught ECONNRESET exception.
Three fixes:
1. Guard against duplicate error handling in conn.on("error") — once the
promise is settled, late errors (e.g. ECONNRESET after auth failure)
are logged but no longer re-reject or re-notify the renderer.
2. Destroy the SSH connection on error/timeout to prevent the underlying
TCP socket from emitting further uncaught errors.
3. Wrap non-auth errors in startSSHSessionWrapper with clean Error objects
so Electron's ipcMain.handle can serialize them back to the renderer.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The remote file listing mapper in useSftpDirectoryListing.ts was
dropping the `permissions` field returned by the backend. This caused
the permissions dialog to show all checkboxes unchecked (000) and the
file list to show "--" in the permissions column.
One-line fix: add `permissions: f.permissions` to the mapped object.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add title attribute to the file name span so truncated names reveal
their full text via native browser tooltip on hover.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
P2: Wrap keyboard-interactive handlers in SSH chain, SFTP chain, and
SFTP main connections to emit "waiting for user input..." and "user
responded" progress events, matching the SSH main connection behavior.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
P2: Remove premature onAuthAttempt calls from buildAuthHandler's array
branch — methods are listed before connect(), making logs inaccurate.
P2: Handle "waiting for user input..." and "user responded" as literal
log messages, not as "Trying X..." format, in both SSH and SFTP.
P3: Clear connectionLogs after successful SFTP connect so directory
navigation doesn't replay stale auth transcript in the loading overlay.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
P2: Emit onAuthAttempt notifications from buildAuthHandler's array
branch so single-method SFTP connections (e.g. password-only) show
auth method logs in the connection panel.
P3: Show connectionLogs in the cached-files loading overlay so repeat
connections still display auth progress during reconnect.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
P2: Guard SFTP progress callback with navSeqRef check to prevent stale
auth logs from leaking into a reused tab after retry/disconnect.
P3: Reset connectionLogs when connecting to local filesystem, avoiding
stale remote auth logs showing in the local pane.
P3: Emit 'connected' progress event when the final SFTP SSH session
is ready, so the log confirms the connection completed.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add detailed authentication method logs to both SSH terminal and SFTP
connection flows, giving users visibility into which methods are tried,
rejected, or require input.
Backend (shared):
- sshAuthHelper buildAuthHandler: track lastAttemptedLabel, log method
rejections and "all methods exhausted" via onAuthAttempt callback
- sftpBridge: add sendSftpProgress helper, wire onAuthAttempt to both
chain and main buildAuthHandler calls, emit connecting/authenticating/
connected/error progress events via new IPC channel
Backend (SSH-specific):
- sshBridge: log method rejections in custom authHandler, log
keyboard-interactive prompt/response and all-methods-exhausted
IPC/Bridge:
- preload: register netcatty:sftp:connection-progress listener, expose
onSftpConnectionProgress in bridge API
- global.d.ts: add onSftpConnectionProgress type
Frontend (SFTP):
- types.ts: add connectionLogs to SftpPane
- useSftpConnections: subscribe to progress events during connect,
convert to human-readable log lines, accumulate in pane state
- SftpPaneFileList: show logs below spinner during connecting, show
expandable "Show logs" in error view with collapsible log panel
Frontend (SSH):
- createTerminalSessionStarters: format rejected methods with ✗ prefix
and "all methods exhausted" message
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
P1: serializeHostsToSshConfig now emits IdentityFile directives so
managed ssh_config sources preserve key paths on sync. Paths with
spaces are automatically quoted.
P2: Unquote IdentityFile paths during import — ssh_config allows
quoted paths for filenames with spaces, but the quotes were stored
literally and caused fs.readFile to fail.
P2: Clear identityFilePaths when applying an identity profile, and
only forward them at connection time when no vault key is selected.
Prevents stale local key paths from triggering unrelated passphrase
prompts after switching to a different credential source.
P1 (SFTP): Forward identityFilePaths for jump hosts in SFTP credentials.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
P1: Pass identityFilePaths for jump hosts in SFTP credentials so chain
connections can load IdentityFile keys for bastion hosts.
P2: When the passphrase dialog is skipped or times out (not just
cancelled), clear the encrypted key and continue to the next identity
file. Previously skip/timeout fell through and left the encrypted key
in connOpts, causing the same stall this feature is meant to fix.
Applies to all 4 identity file loading paths (SSH chain, SSH main,
SFTP chain, SFTP main).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Replace the manual-only text input with a file picker button that opens
the system file dialog (showOpenDialog with showHiddenFiles enabled so
~/.ssh/ keys are visible). Users can still type a path manually or use
the browse button.
Changes:
- electron/main.cjs: add netcatty:selectFile IPC handler
- electron/preload.cjs: expose selectFile on bridge
- global.d.ts: add selectFile type
- HostDetailsPanel.tsx: add FolderOpen browse button next to path input
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add "Local Key File" option in the host credential type selector.
Users can specify local SSH key file paths (e.g. ~/.ssh/id_ed25519)
as an alternative to selecting a key from the vault. This is the
primary UI for keys imported via SSH config's IdentityFile directive.
UI behavior:
- Credential selector now shows three options: Key, Certificate,
Local Key File
- Local key file paths are displayed as a list with delete buttons
- Text input with Enter/Add support for adding new paths
- Selecting a vault key clears local key paths (and vice versa)
- Paths are stored as host.identityFilePaths and resolved at
connection time
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
SSH config import now parses the `IdentityFile` directive and stores
the file paths on the host as `identityFilePaths`. At connection time,
the SSH and SFTP bridges resolve these paths, read the key file content,
and use it for authentication — matching the behavior of OpenSSH and
Tabby.
If the key file is encrypted, a passphrase dialog is shown before
connecting. If the user cancels, the key is skipped and auth falls back
to other methods. If the file doesn't exist, a warning is logged and
the next key path is tried.
Changes:
- domain/models.ts: add `identityFilePaths` to Host interface
- domain/vaultImport.ts: parse `IdentityFile`, expand `~`, store paths
- global.d.ts: add `identityFilePaths` to NetcattySSHOptions and
NetcattyJumpHost types
- createTerminalSessionStarters.ts: pass identityFilePaths for both
main connection and jump hosts
- useSftpHostCredentials.ts: pass identityFilePaths for SFTP
- sshBridge.cjs: read identity files at connection time for both main
and chain connections, with encrypted key passphrase prompting
- sftpBridge.cjs: same for SFTP main and chain connections
Closes#463
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Address Codex P2: when the passphrase dialog is cancelled, the thrown
error now includes 'authentication' in the message and sets
level='client-authentication'. This allows the SFTP frontend's
isAuthError() check to recognize it and fall back to the password
retry path, preserving the key-first-then-password behavior.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Address Codex P3: the passphrase modal was showing UUIDs or generic
placeholders like "private-key" / "hop-1-key" instead of the host
label or hostname. Now pass the human-readable label/hostname as
keyName so users can identify which key needs the passphrase.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Address Codex P2: when using a proxy and an encrypted key, cancelling
the passphrase dialog cleaned up chain connections but leaked the
proxy socket in connectionSocket. Now explicitly destroy it.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Address Codex P2: when the passphrase dialog is cancelled for the
final SFTP host, any already-open proxy/jump-host connections were
leaked because the throw bypassed the cleanup path. Now explicitly
end all chain connections before throwing.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Address Codex P1 review: when the passphrase dialog is skipped or
times out, the encrypted key was left in connOpts.privateKey without
a passphrase. buildAuthHandler would still attempt it as publickey-user,
causing the same stall this PR fixes. Now delete connOpts.privateKey
in all non-success paths so auth falls back to password/keyboard-interactive.
Applies to SSH chain, SFTP chain, and SFTP main connection paths.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Codex review caught a P1 regression: when a multi-line snippet had
noAutoRun=false, the \r was appended before wrapping in bracketed
paste, causing shells to treat the Enter as pasted text instead of a
submit action. Now the bracketed paste wraps only the command text,
and \r is appended afterward so it is sent as a real keypress.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Address Codex review feedback: the snippet executor was registered on
mount before the session was ready, causing sidebar snippet clicks to
be silently dropped during the connecting/reconnecting window instead
of falling through to TerminalLayer's raw writeToSession fallback.
Now the executor is only published when status === "connected" and is
cleared back to null on disconnect so the fallback path is used for
sessions that aren't ready.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When an SSH config specifies an encrypted IdentityFile for a jump host
(e.g. `IdentityFile ~/.ssh/id_ed25519` with passphrase protection),
the chain connection passed the encrypted key to ssh2 without a
passphrase. ssh2 failed to parse it and the auth hung until timeout,
with no user-visible prompt.
The same issue existed for SFTP connections using encrypted keys.
Now detect encrypted keys via `isKeyEncrypted()` before connecting and
prompt the user for the passphrase via the existing passphrase dialog.
If the user cancels, a clear error is shown. If skipped, auth falls
back to other methods (password, keyboard-interactive, default keys).
Closes#463
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add EHOSTDOWN, ENETDOWN, EPROTO, EPERM to the isNonFatalNetworkError
check. Also refactor to switch/case for readability.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
ssh2 emits multiple error events per failed connection (e.g. ECONNRESET
followed by "Connection lost before handshake"). Several code paths used
`.once("error")` which removed the listener after the first event,
leaving the second error unhandled and crashing the process via the
uncaughtException handler's re-throw.
Root cause: `runDistroDetection` ran unconditionally after connection
attempts (including failures), creating a new SSHClient to the same
unreachable host. Its `execCommand` used `.once("error")`, so the
second ssh2 error event had no listener and became an uncaught exception.
Fixes:
- execCommand: `.once("error")` → `.on("error")` with settled guard and
explicit `conn.end()` cleanup
- runDistroDetection: move into try block so it only runs after
successful connections
- portForwardingBridge: same `.once` → `.on` fix
- sftpBridge: add catch-all error listener after cleanup() removes the
pre-ready listeners
- main.cjs: suppress non-fatal SSH/network errors in uncaughtException
and unhandledRejection handlers as defense-in-depth (log to crash
bridge, do not re-throw)
Closes#452
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: support bare IPv6 addresses in quick connect and fix IPv6 display
- Accept un-bracketed IPv6 addresses (e.g. 2607:f130::4f06) in quick
connect input. The main regex requires brackets for IPv6+port, but now
falls back to detecting bare IPv6 (2+ colons, hex-only) when the
primary pattern fails.
- Add formatHostPort() helper that wraps IPv6 addresses in brackets
when appending a port, preventing ambiguous displays like
"2607:f130::4f06:22"
- Apply formatHostPort in QuickConnectWizard, TerminalConnectionDialog,
and SftpSidePanel
- Fix hop label formatting in sshBridge and sftpBridge for IPv6 jump
hosts
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: truncate long hostnames in connection dialog
Add truncate to the host label and protocol subtitle in the connection
dialog so long IPv6 addresses don't overflow into the action buttons.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: constrain connection dialog header so truncate works correctly
Add min-w-0/flex-1 to the left side of the header flex container and
shrink-0 to the avatar so long hostnames truncate instead of pushing
into the Show logs / close buttons.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: prevent action buttons from being squeezed by long hostname
Add shrink-0 and left margin to the right-side button group so truncated
text doesn't crowd into Show logs / close buttons.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: tighten bare IPv6 detection to avoid MAC address false positives
Only accept bare (un-bracketed) hex:colon strings as IPv6 if they
contain '::' (unambiguously IPv6) or have exactly 7 colons (full
8-group notation). This rejects MAC addresses like aa:bb:cc:dd:ee:ff
(5 colons) which would otherwise trigger quick-connect mode.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: avoid double-wrapping already-bracketed IPv6 hop labels
Add !startsWith('[') guard so hostnames that are already bracketed
(e.g. from URL-imported hosts) don't produce malformed labels like
[[2607:f130::4f06]]:22.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Add smoothScrolling boolean to TerminalSettings (default: true)
- Wire setting to xterm.js smoothScrollDuration (120ms when on, 0 when off)
- Add toggle in terminal settings UI
- Include in sync payload and i18n strings (en, zh-CN)
Inspired by #467 (@crawt).
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Use a regex ASCII test to detect lines where string indices equal cell
columns, skipping the buildStringToCellMap buffer walk entirely. Most
terminal output is ASCII, so this avoids the majority of cell API calls.
- Share a frozen empty array for non-matching lines instead of allocating
a new array per scanLine call, reducing GC pressure during scrollback.
Inspired by #466 (@crawt).
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* perf(keyword-highlight): reduce highlight latency with throttled rAF and line cache
Based on #464 by @crawt with fixes for review feedback:
- Split triggerRefresh into immediate (rAF) and debounced (setTimeout) modes
so onWriteParsed highlights land with fresh content instead of trailing
by 200ms
- Throttle the immediate path (50ms min interval) to prevent heavy output
like tail -f from refreshing every frame
- Add per-line match result cache (LRU, bounded by cacheEntries config)
so repeated or scrolled-back lines skip regex scanning entirely
- Lazily build cellMap only when a regex match is found, avoiding
unnecessary work on non-matching lines
- Fix buildStringToCellMap to handle empty cells (codepoint 0) which
translateToString() renders as spaces — keeps the map aligned with
the string and makes lineText a safe cache key
- Clean up animationFrameId and matchCache on dispose/rule change
Co-Authored-By: Leo Pan <crawt@users.noreply.github.com>
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: guard rAF callback against stale state and add debounce fallback
- Re-check enabled/alternate-buffer inside the rAF callback so a
pending frame doesn't resurrect decorations after the user disables
highlighting or enters an alternate-buffer app
- Schedule a debounce timer alongside rAF so background/hidden tabs
(where Chromium suspends rAF) still get highlight updates
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: prevent fallback timer from being cleared on rAF-pending path
- Don't clear debounceTimer at the start of immediate mode — in hidden
tabs rAF stays pending indefinitely, so repeated onWriteParsed calls
were clearing the only timer that could actually fire
- Cancel debounceTimer inside the rAF callback instead, so foreground
tabs don't get a redundant second refreshViewport() 200ms later
- Only arm a new fallback timer if one isn't already pending
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: clear stale rAF in fallback timer and add alternate buffer guard
- Cancel the pending rAF and clear animationFrameId in the fallback
timer callback so hidden-tab refreshes don't leave animationFrameId
stuck, which would block all future immediate refreshes
- Add enabled/alternate-buffer re-check in the fallback callback,
matching the guard already present in the rAF callback
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: extract executeRefresh to ensure all timer paths clear stale rAF
A debounced-path timer (from scroll/resize) could fire without clearing
a stale animationFrameId left by an earlier immediate-path rAF that
never executed (hidden tab). This left the immediate path permanently
blocked.
Extract executeRefresh() with rAF cleanup + state guards, used by all
three callback sites (rAF, immediate fallback, debounced timer).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Leo Pan <crawt@users.noreply.github.com>
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* perf(keyword-highlight): reduce highlight latency and redundant regex scanning
- Split triggerRefresh into two modes: "immediate" (rAF, for new output
and rule changes) and "debounced" (setTimeout, for scroll/resize),
eliminating the fixed 200ms delay after each write that caused visible
highlight lag on commands like `ls`.
- Add per-line match result cache (LRU, bounded by cacheEntries config)
so repeated or scrolled-back lines skip regex scanning entirely.
- Lazily build the string-to-cell column map only when a regex match is
actually found, avoiding unnecessary work on non-matching lines.
- Clean up animationFrameId and matchCache on dispose/rule change to
prevent leaks and stale results.
* fix: include cell layout in highlight cache key to prevent misplaced decorations
Two IBufferLines can produce identical translateToString() output but
differ in cell layout (e.g. empty cells vs real space characters after
tab stops). Using lineText alone as the cache key could return cached
x/width ranges computed from a different cell layout, producing
misplaced or truncated highlights.
Build the cellMap eagerly and include it in the cache key so lines with
different cell structures get separate cache entries. Pass the pre-built
cellMap into scanLine to avoid redundant work.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: panwk <panwukan@suangoo.com>
Co-authored-by: bincxz <16399091+binaricat@users.noreply.github.com>
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: resolve SSH chain connection hang and improve connection progress
- Fix Promise never settling when conn 'close' fires before 'ready'
during chain connections, which caused "reply was never sent" error
- Replace fake timed progress animation with real backend events
- Send granular connection progress for all SSH connections (not just
chain), including: connecting, key exchange, auth attempts, forwarding,
shell opening
- Surface auth method attempts (SSH agent, key names, password) in
progress logs so users can diagnose authentication failures
- Include error details in progress events for better error visibility
Closes#463
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: scope progress events by sessionId, prevent duplicate errors, hide chain UI for direct SSH
- Add sessionId to chain progress payload so events are scoped per session (P1)
- Set settled=true in error/timeout handlers to prevent close handler from
emitting a second misleading 'closed unexpectedly' error (P2)
- Only show chain progress UI when total > 1 so direct SSH connections
don't render as 'Chain 1/1' (P3)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: mark shell-open failure as settled before closing connection
The conn.shell() error branch calls conn.end() which triggers the close
handler, but settled was not set yet, causing a duplicate 'closed
unexpectedly' error to overwrite the real shell-open failure message.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- TerminalLayer: remove bracket paste wrapping since we can't check
term.modes.bracketedPasteMode here — keep only normalizeLineEndings
- createXTermRuntime: broadcast un-wrapped data before applying
bracket paste, so target sessions don't receive literal escape
sequences meant for the source terminal's paste mode state
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Only wrap multi-line snippets in bracket paste sequences when:
- createXTermRuntime: term.modes.bracketedPasteMode is active AND
disableBracketedPaste setting is false (matches paste handler)
- TerminalLayer: disableBracketedPaste setting is false (no access
to term.modes, but respects user opt-out)
Prevents sending literal ^[[200~ escape sequences to shells that
don't support or have disabled bracketed paste mode.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Snippet execution via sidebar click was missing normalizeLineEndings()
and bracket paste wrapping that the paste handler and shortkey handler
already apply. On Windows ConPTY/PowerShell, sending raw multi-line
input without bracket paste can cause out-of-order line execution
because the shell processes lines individually and asynchronously.
- Add normalizeLineEndings() to sidebar snippet click handler
- Wrap multi-line snippets in bracketed paste sequences (\e[200~...\e[201~)
so the shell treats them as a single atomic paste
- Apply same fix to shortkey snippet handler for consistency
- Fix broadcast payload to use the processed data
Fixes#455
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Close/destroy the SSH exec stream when the 5s timeout fires to
avoid leaking session slots (MaxSessions).
- Treat SFTP realpath('.') returning '/' as non-authoritative so
non-root users fall through to the candidate probe chain instead
of incorrectly opening at root.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Prevent indefinite blocking when the remote shell init hangs or a
forced command never exits. Falls through to SFTP realpath after
timeout.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>