Commit Graph
1689 Commits
Author SHA1 Message Date
bincxzandClaude Opus 4.6 b6e8d63fef fix: remove SFTP from QuickSwitcher when SFTP tab is hidden
Per Codex P2 review on #700: QuickSwitcher always listed an 'sftp' tab
item, but with showSftpTab off the App-level redirect bounces the user
straight back to Vault. That left a dead entry in quick-switch — selecting
it appeared broken.

Thread showSftpTab through QuickSwitcher and skip the SFTP item in both
the flat item list (used for keyboard selection indexing) and the
rendered built-in Tabs row when the top tab is hidden. Keeps every
SFTP navigation surface consistent with the visibility setting.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-13 00:13:31 +08:00
bincxzandClaude Opus 4.6 60c07da140 fix: exclude hidden SFTP tab from keyboard tab cycling
Per Codex P1 review on #700: when showSftpTab is off, executeHotkeyAction
still built allTabs as ['vault', 'sftp', ...orderedTabs]. nextTab from
Vault would land on hidden 'sftp', the showSftpTab effect then redirected
back to 'vault', trapping tab cycling so Ctrl/Cmd+Tab could not advance
into terminal tabs. Number shortcuts (Ctrl+1..9) were also shifted, e.g.
tab 2 resolved to hidden SFTP and ping-ponged back to Vault.

Build allTabs conditionally so 'sftp' is only in the cycle when the tab
is visible. This keeps nextTab/prevTab/switchToTab consistent with what
the user sees in the top tab bar.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-13 00:05:36 +08:00
bincxzandClaude Opus 4.6 f89afc0e05 feat: add setting to hide the standalone SFTP top tab
Adds a "Show SFTP tab" toggle in Settings → Appearance (under the
Vault section) that controls visibility of the standalone SFTP view
in the top tab bar. When disabled:

- The SFTP tab is removed from the top tab strip.
- The openSftp hotkey (Ctrl+Shift+O / ⌘⇧O) becomes a no-op.
- If the user is currently on the SFTP tab, the active tab auto-
  switches to Vaults.

The in-session SFTP side panel (opened from the terminal toolbar) is
unaffected — that is the surface users keep when they hide the
top-level tab.

Setting persists via localStorage, syncs across windows, and is
included in the cloud SyncPayload alongside the existing Vault
visibility toggles (showRecentHosts,
showOnlyUngroupedHostsInRoot). Default: on.

Addresses the first ask in #690.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-12 23:57:15 +08:00
陈大猫 ca0b1ed9ae Merge pull request #699 from binaricat/fix/issue-694-ctrl-f-hardcoded
fix: remove hardcoded Ctrl+F handler bypassing configurable shortcuts
2026-04-12 23:46:09 +08:00
bincxzandClaude Opus 4.6 555438a02a fix: set Ctrl+F as the default PC shortcut for terminal search
Previously the documented default was Ctrl+Shift+F on PC, but a
hardcoded handler always captured plain Ctrl+F regardless of the
configured binding — so the effective default users experienced was
Ctrl+F. Now that the hardcoded handler is removed, align the declared
default with that historical behavior so existing users don't lose the
shortcut they were used to. Users who need plain Ctrl+F for the shell
(e.g. zsh forward-char) can remap or disable it in Settings → Shortcuts.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-12 23:44:05 +08:00
bincxzandClaude Opus 4.6 97e78624bb fix: remove hardcoded Ctrl+F handler that bypassed configurable shortcuts
The xterm custom key event handler intercepted plain Ctrl+F / Cmd+F to
open terminal search, ignoring the user's configured keybinding scheme.
This conflicted with zsh's forward-char (Ctrl+F) and gave users no way
to disable it via the Shortcuts settings tab.

The configurable keybinding system below already routes the
searchTerminal action via checkAppShortcut, with defaults of
Ctrl+Shift+F (PC) and Cmd+F (Mac). Dropping the hardcoded branch
lets the user's settings take effect. Also remove the stale
"(Ctrl+F)" label from the toolbar tooltip since the shortcut is
configurable and the default on PC is Ctrl+Shift+F.

Fixes #694

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-12 23:42:27 +08:00
陈大猫 eab1e8db67 Merge pull request #698 from binaricat/codex/issue-638-root-ungrouped-hosts
[codex] Add vault root ungrouped host filter toggle
2026-04-12 23:36:47 +08:00
bincxz 8e6392e503 persist vault root filter toggles immediately 2026-04-12 23:30:02 +08:00
bincxz 8b99f2411f fix vault root host filter sync and empty states 2026-04-12 23:27:36 +08:00
bincxz 98905b9c81 fix vault hosts section initialization order 2026-04-12 23:14:59 +08:00
bincxz b7e1df9916 hide empty root hosts section 2026-04-12 23:13:44 +08:00
bincxz 3089cab88d add vault root ungrouped host toggle 2026-04-12 23:09:03 +08:00
陈大猫 98dda8a51b Merge pull request #693 from binaricat/fix/claude-acp-custom-model-provider
fix: Claude ACP agent now uses custom API key and base URL
v1.0.88
2026-04-12 00:51:25 +08:00
bincxzandClaude Opus 4.6 42baa5cb78 fix: include provider base URL in ACP reuse fingerprint for Claude
The ACP provider reuse gate only computed authFingerprint for Codex,
leaving it null for Claude. Changing the configured provider or base
URL mid-session would keep reusing the stale provider instance.

Now Claude computes an authFingerprint from apiKey + baseURL, so
changing either value invalidates the cached provider and forces
recreation with the new credentials/endpoint.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-12 00:37:34 +08:00
bincxzandClaude Opus 4.6 11fd7fcd71 fix: prefer anthropic provider over generic custom for Claude ACP
A generic custom provider (OpenAI-compatible) could be selected for
Claude, passing wrong credentials. Now we prefer an explicit anthropic
provider and only fall back to a custom provider when it has a baseURL
configured (indicating intentional Anthropic-compatible gateway use).

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-12 00:31:01 +08:00
bincxzandClaude Opus 4.6 d6950948fa fix: also inject OPENAI_BASE_URL for Codex ACP agent
Codex reads OPENAI_BASE_URL to connect to custom API endpoints.
Without this, users with a custom baseURL on their OpenAI provider
config would still hit the default api.openai.com endpoint.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-12 00:29:14 +08:00
bincxzandClaude Opus 4.6 9693793bba fix: allow Claude ACP agent to use custom API key and base URL
The renderer only resolved OpenAI providers (for Codex) when passing
provider IDs to the main process. Claude agent was never matched, so
no API key was injected. Additionally, the main process only injected
CODEX_API_KEY — never ANTHROPIC_API_KEY or ANTHROPIC_BASE_URL.

Changes:
- Renderer now resolves anthropic/custom provider for Claude agent,
  openai provider for Codex agent (via matchesManagedAgentConfig)
- Main process injects ANTHROPIC_API_KEY and ANTHROPIC_BASE_URL into
  claude-agent-acp env when a provider is configured, across all three
  ACP provider creation paths (list-models, stream, fallback)

This enables users who configure an Anthropic provider with a custom
base URL (e.g. CC Switch proxy) to use Claude Code without being
redirected to the official OAuth flow.

Closes #677

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-12 00:26:24 +08:00
陈大猫 a72f012851 Merge pull request #692 from binaricat/fix/scrollback-zero-wheel-scroll
fix: mouse wheel scrolling broken when scrollback set to 0
2026-04-12 00:04:44 +08:00
bincxzandClaude Opus 4.6 1368709f4e fix: map scrollback=0 to large value so mouse wheel scrolling works
xterm.js treats scrollback=0 as "no scrollback buffer", which makes
hasScrollback return false and converts wheel events into arrow-key
sequences. The UI uses 0 to mean "no limit", so map it to 999999
before passing to xterm.js.

Closes #689

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-12 00:00:18 +08:00
陈大猫 d1408b8050 Merge pull request #688 from binaricat/feat/ui-matched-terminal-themes
feat: add Follow Application Theme for terminal + 14 UI-matched themes
v1.0.87
2026-04-10 22:01:59 +08:00
bincxz 9ca68561b3 fix: clean up stale inherited theme state 2026-04-10 21:49:01 +08:00
bincxz c3c579b8a0 fix: close remaining theme sync gaps 2026-04-10 21:43:15 +08:00
bincxz 2784ecdf28 fix: sync inherited themes in editors 2026-04-10 21:30:25 +08:00
bincxz 75bbd1f300 fix: preserve theme inheritance and modal rollback 2026-04-10 21:21:51 +08:00
bincxz 4ee4ef7b60 fix: polish follow-app terminal theme UX 2026-04-10 21:03:14 +08:00
bincxzandClaude Opus 4.6 32f4aadab2 fix: follow-app-theme now overrides per-host theme settings
When followAppTerminalTheme is on, all terminals should use the
UI-matched theme — but three resolution points were still checking
per-host overrides:

1. App.tsx resolveTheme() in the activeTerminalTheme computation
2. Terminal.tsx effectiveTheme computation
3. TerminalLayer.tsx focusedThemeId computation

Added followAppTerminalTheme prop flowing from App → TerminalLayer
→ Terminal. When the flag is true, per-host theme resolution is
bypassed so all terminals consistently match the app chrome.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-10 20:25:21 +08:00
bincxzandClaude Opus 4.6 fc32b44d8e fix: replace missing ToggleRow with SettingRow + Toggle
ToggleRow is a locally-defined component in HostDetailsPanel and
GroupDetailsPanel — it is NOT exported or available in the terminal
settings tab. Using it caused a white-screen crash. Replaced with
the existing SettingRow + Toggle pattern that's already used
throughout the terminal settings tab.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-10 20:19:54 +08:00
bincxzandClaude Opus 4.6 76cd1f2883 fix: remove unused variables flagged by eslint
- App.tsx: remove unused followAppTerminalTheme/setFollowAppTerminalTheme
  from destructuring (they flow through settings object, not App props)
- createTerminalSessionStarters.ts: remove dead usedKey/usedPassword
  assignments left over from PR #680 which changed runDistroDetection
  to use the existing session's connection instead of auth credentials

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-10 20:17:15 +08:00
bincxzandClaude Opus 4.6 76d37d982a fix: upgrade-safe default + cross-window broadcast for follow-theme
P1: Follow mode defaulted ON when the storage key was missing, which
is true for ALL existing users after upgrade (not just fresh
installs). Now checks whether a terminal theme was already stored —
if so, this is an upgrade and we default OFF to preserve the user's
manual choice. Only genuinely fresh installs (no terminal theme in
storage) default to ON.

P2: The follow-theme persist effect now calls notifySettingsChanged
and a matching branch in the cross-window storage event handler
syncs the toggle state across windows, matching the pattern used by
all other terminal settings.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-10 20:14:05 +08:00
bincxzandClaude Opus 4.6 6d2f3f28c0 feat: add "Follow Application Theme" for terminal + 14 UI-matched terminal themes (#675)
When enabled (default for new users), the terminal theme automatically
switches to match the active app UI theme — so the terminal background
blends seamlessly with the app chrome, regardless of which UI theme
preset the user picks (Snow, Midnight, Forest, etc.).

## New terminal themes (14)

Each built-in UI theme preset now has a corresponding terminal theme
with an exactly matching background color:

Light: ui-snow, ui-pure-white, ui-ivory, ui-mist, ui-mint, ui-sand,
ui-lavender — ANSI palette based on netcatty-light with per-theme
cursor colors that complement the UI accent.

Dark: ui-pure-black, ui-midnight, ui-deep-blue, ui-vscode,
ui-graphite, ui-obsidian, ui-forest — ANSI palette based on
netcatty-dark with accent-matched cursors and selections.

## "Follow Application Theme" setting

- New toggle in Settings → Terminal → Theme section
- Default ON for new users, persisted in localStorage
- When ON: terminal theme auto-derived from the active UI theme via
  a mapping table in domain/terminalAppearance.ts
- When OFF: manual theme selector shown (existing behavior)
- Switching the app between light/dark (or changing the UI theme
  preset) instantly updates the terminal theme

## Files changed (9)

- terminalThemes.ts: +14 theme definitions
- terminalAppearance.ts: UI→terminal mapping table +
  getTerminalThemeForUiTheme()
- useSettingsState.ts: followAppTerminalTheme state + persist +
  currentTerminalTheme derivation
- storageKeys.ts: new storage key
- SettingsTerminalTab.tsx: toggle UI + conditional theme selector
- SettingsPage.tsx: pass new props
- App.tsx: destructure new state
- en.ts + zh-CN.ts: 2 new i18n keys

Closes #675

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-10 20:06:13 +08:00
陈大猫andClaude Opus 4.6 a1c9f5fbd0 fix: normalize CRLF to LF when saving text files via SFTP (#681) (#687)
On Windows, the built-in text editor produces CRLF line endings.
When saved to a Linux host via SFTP, the \r characters break shell
scripts ("command not found", syntax errors) because Linux treats
\r as part of the command.

Normalize \r\n → \n in writeSftp() before writing. LF is universally
supported — even Windows 10+ notepad handles LF-only files — so this
is safe for all target platforms.

Closes #681

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-10 18:51:01 +08:00
陈大猫andClaude Opus 4.6 ce5cb2afec feat: add Windows portable build target (#668) (#686)
Add a `portable` target alongside the existing `nsis` installer for
Windows builds. The portable version produces a single .exe that
runs without installation — just download and double-click.

The artifact is named with a `-portable-` infix to distinguish it
from the installer in the release assets.

Closes #668

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-10 18:49:32 +08:00
Eric Chan c771979178 Add Skills + CLI mode for external agents (#599)
* Add Skills + CLI external agent workflow

* feat: add Skills + CLI transport for ACP agents

* chore: remove branch-local compatibility shims
2026-04-10 18:41:53 +08:00
陈大猫andClaude Opus 4.6 58c651500e feat: add Gist revision history UI for vault restore (#685)
* feat: add Gist revision history UI for vault restore (#679)

Adds a "History" button on the GitHub Gist provider card in
Settings → Sync & Cloud. Clicking it opens a modal that lists all
Gist revisions (newest first) and lets the user preview and restore
any historical version with one click.

## How it works

1. The GitHub API already returns a `history` array when fetching a
   Gist (`GET /gists/{id}`). The existing `getGistHistory()` reads
   this. A new `downloadGistRevision(sha)` function fetches a
   specific revision via `GET /gists/{id}/{sha}`.

2. CloudSyncManager exposes `getGistRevisionHistory()` (metadata
   only, no decryption) and `downloadGistRevision(sha)` (decrypt
   + return payload and preview counts).

3. useCloudSync threads both methods through to the UI.

4. CloudSyncSettings renders a three-state modal:
   - **Loading**: spinner while fetching revision list
   - **Revision list**: clickable rows with SHA prefix + date,
     "Current" badge on the latest
   - **Preview**: after clicking a revision, shows entity counts
     (hosts, keys, snippets, identities) and a "Restore This
     Version" button

5. Decryption uses the current master password. If the revision
   was encrypted with a different password (user changed it since
   then), a clear error message is shown instead of a crash.

## Changes

- `GitHubAdapter.ts`: add `downloadGistRevision()` standalone
  function + `getHistory()` / `downloadRevision()` class methods
- `CloudSyncManager.ts`: add `getGistRevisionHistory()` and
  `downloadGistRevision(sha)` with decrypt + preview
- `useCloudSync.ts`: expose both methods
- `CloudSyncSettings.tsx`: add `extraActions` slot to ProviderCard,
  render "History" button on GitHub card, revision history modal
  with list → preview → restore flow
- `en.ts` + `zh-CN.ts`: 18 new i18n keys for the modal

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: use getConnectedAdapter and lazy gist discovery for history APIs

P1: CloudSyncManager's history methods accessed this.adapters directly
instead of getConnectedAdapter(), which lazily initializes adapters.
After an app restart the adapter map is empty even though the provider
is persisted as connected, making history fail until another sync
path initializes it.

P2: GitHubAdapter.getHistory() and downloadRevision() bailed early
when gistId was missing, unlike download() which calls findSyncGist()
to lazily discover it. Users whose gist was created after initial
setup would see no revisions.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-2 codex review on PR #685

P1: Renamed cloudSync.history.* keys to cloudSync.revisionHistory.*
to avoid duplicate key collision with the existing "Sync History"
section title.

P2: Added getGistRevisionHistory and downloadGistRevision to the
CloudSyncHook type interface so the hook contract matches reality.

P2: Simplified decrypt error handling — any error from the decrypt
path now shows the friendly "cannot decrypt" message rather than
relying on fragile substring matching.

P2: Clear historyRevisions on each handleOpenHistory call so stale
data doesn't linger under error banners on retry.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: restore correct i18n key for Sync History section title

The sed rename pass accidentally changed the Sync History panel
heading (line 1290) from cloudSync.history.title to
cloudSync.revisionHistory.title. Restored the original key so the
two sections have distinct titles. Also removed unused err parameter
in the catch block.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-10 16:47:16 +08:00
陈大猫andClaude Opus 4.6 bcf653dd2e fix: prevent empty vault from overwriting cloud data on startup (#683)
* fix: prevent empty vault from overwriting cloud data on startup (#679)

Fixes a data-loss scenario where an empty local vault (caused by an
update, storage corruption, or import failure) silently overwrites
a non-empty cloud vault on startup via auto-sync.

The root cause is a startup timing race: the debounced auto-sync
effect (3s after data change) can fire before checkRemoteVersion
(1s delay + async download) completes its remote pull. When the
local vault is empty, this pushes an empty payload to the Gist,
permanently erasing the user's data.

Four complementary fixes:

A. Empty vault push guard (useAutoSync syncNow):
   Auto-sync refuses to push a payload where hosts, keys, snippets,
   and identities are ALL empty. Manual sync from Settings is still
   allowed for the rare case where the user intentionally emptied
   everything. Prevents the most dangerous path.

B. Skip redundant post-merge push (useAutoSync checkRemoteVersion):
   After applying a three-way merge result from the remote, set
   skipNextSyncRef so the data-change effect does not immediately
   re-upload the same payload. Removes one unnecessary API call per
   startup sync.

C. Gate auto-sync on remote check completion (useAutoSync effect):
   Added remoteCheckDoneRef — the debounced auto-sync effect will
   not fire until checkRemoteVersion has completed (success or
   failure). This closes the timing window entirely: an empty vault
   can no longer race ahead of the remote pull.

D. Empty-vault-vs-cloud confirmation dialog (App.tsx + useAutoSync):
   When checkRemoteVersion detects local is empty but cloud has
   data, it pauses and shows a root-level dialog with two options:
   - "Restore from Cloud" (recommended) — applies the remote payload
   - "Keep Empty" — starts fresh with an empty vault
   The dialog blocks the sync flow via a Promise that resolves when
   the user picks an option. This gives users explicit control over
   a situation that previously happened silently behind their backs.

Also adds en + zh-CN i18n strings for the new dialog and toast
messages.

Closes #679

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address codex review on PR #683

P1-1: Unified isPayloadEffectivelyEmpty helper covering all synced
entity arrays (hosts, keys, snippets, identities, customGroups,
snippetPackages, portForwardingRules, knownHosts, groupConfigs).
Replaces the three inline checks in syncNow and checkRemoteVersion
that only covered hosts/keys/snippets/identities.

P1-2: Replaced hand-rolled overlay div with the project's existing
Dialog/DialogContent/DialogHeader/DialogFooter components. This adds
role="dialog", aria-modal, focus trap, and ESC-key dismiss for free.
Used lucide-react AlertTriangle/Download/Trash2 icons instead of
inline SVGs.

P2-1: Guard against double-resolve in resolveEmptyVaultConflict by
nulling the ref immediately on first call.

P2-2: Replaced hardcoded "N hosts, N keys, N snippets" with an i18n
key using interpolation (cloudSummary) so the count text is properly
translated in zh-CN.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-2 codex review on PR #683

P1: isPayloadEffectivelyEmpty now also checks the settings object.
A vault with only settings (e.g. custom theme, font size) and zero
hosts/keys/snippets is no longer treated as empty.

P1: Dialog accessibility — use hideCloseButton to remove the non-
functional close button, onEscapeKeyDown + onOpenChange prevent
dismiss (the user MUST choose an option), and wrap the description
in DialogDescription so aria-describedby is properly linked.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: use single-brace interpolation syntax for cloudSummary i18n key

The project's i18n system uses single-brace placeholders ({var}),
not double-brace ({{var}}). The double-brace syntax was rendering
as raw text instead of being interpolated.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-10 15:20:27 +08:00
陈大猫andClaude Opus 4.6 0caf19af7e fix: pass legacyAlgorithms to port forwarding SSH connections (#682)
* fix: pass legacyAlgorithms to port forwarding SSH connections (#678)

Port forwarding connections always used modern-only algorithms because
the legacyAlgorithms host setting was never threaded through to the
port forwarding bridge. When the jump server or target host runs an
older SSH implementation (e.g. OpenSSH 7.4) that only supports legacy
key exchange algorithms like diffie-hellman-group14-sha1, the
handshake fails with "Connection lost before handshake".

The SSH terminal path already handles this correctly via
buildAlgorithms(options.legacyAlgorithms) — the port forwarding path
was simply missing the same plumbing.

Changes:
- sshBridge.cjs: export buildAlgorithms so portForwardingBridge can
  reuse it (avoids duplicating the algorithm list)
- portForwardingBridge.cjs: destructure legacyAlgorithms from the
  payload, pass it to connectOpts.algorithms via buildAlgorithms(),
  and thread it through to connectThroughChain for jump host
  connections
- portForwardingService.ts: include host.legacyAlgorithms in the
  startPortForward bridge call

Closes #678

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: add legacyAlgorithms to PortForwardOptions type contract

Per Codex review: the new legacyAlgorithms field was being passed
in the startPortForward call but was not declared in the
PortForwardOptions interface in global.d.ts, causing a TS2353 type
error in strict type-checking environments.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-10 14:31:52 +08:00
陈大猫andClaude Opus 4.6 e8b9122270 feat: auto-detect network devices from SSH banner and skip stats polling (#680)
* feat: auto-detect network devices from SSH banner and skip stats polling (#674)

Fixes rapid AAA session churn reported on Cisco/HPE/similar network
devices running Netcatty. The root cause was two separate polls that
both open fresh exec channels (each counted as its own AAA session on
many network devices):

- runDistroDetection() opens a brand new SSH connection every time a
  host connects to run `cat /etc/os-release || uname -a`
- useServerStats polls `conn.exec(statsCommand)` every 5 seconds

Both commands fail on non-POSIX CLIs, but the channels still hit AAA.

This change avoids both by reading the SSH server identification
string that ssh2 already captures during the handshake
(`conn._remoteVer`). No extra network round-trips, zero additional
AAA entries.

## Changes

**sshBridge.cjs**
- Store `conn._remoteVer` on the session object at connect time as
  `session.remoteSshVersion`
- New IPC handler `netcatty:ssh:remoteInfo` (`getSessionRemoteInfo`)
  returning the captured SSH server software string

**preload.cjs / global.d.ts / useTerminalBackend.ts**
- Thread `getSessionRemoteInfo(sessionId)` through to the renderer

**domain/host.ts**
- `NETWORK_DEVICE_OPTIONS` constant listing the vendor IDs we can
  recognize (cisco, juniper, huawei, hpe, mikrotik, fortinet,
  paloalto, zyxel)
- `detectVendorFromSshVersion()` — pure function that parses an SSH
  server software string and returns a vendor ID or ''. Pattern set
  is sourced from Nmap nmap-service-probes (authoritative), the
  ssh-audit software.py reference, and vendor docs; see code
  comments for the exact matches used.
- `classifyDistroId()` returns `linux-like | network-device | other`
  so features that require a POSIX shell can gate on the result.

**createTerminalSessionStarters.ts (runDistroDetection)**
- Before running the /etc/os-release probe, call
  `getSessionRemoteInfo` on the already-connected session and feed
  the banner into `detectVendorFromSshVersion`. If the vendor maps
  to a known network device, emit the vendor ID via the existing
  `onOsDetected` callback and skip the shell probe entirely. For
  unknown or generic OpenSSH/Dropbear banners the existing behavior
  is preserved.

**Terminal.tsx**
- `isSupportedOs` now derives from `classifyDistroId(effectiveDistro)`
  combined with `host.deviceType !== 'network'`, so neither explicit
  network-device hosts nor banner-detected ones trigger the stats
  polling loop.

**useServerStats.ts**
- Add a consecutive-failure counter. After 3 consecutive failed
  polls, stop the interval for this session (reset on disconnect /
  sessionId change / settings toggle). This is the fallback for
  hosts the banner classifier cannot identify (Juniper JUNOS,
  Cisco NX-OS, Arista EOS — all present as plain `OpenSSH_*` but
  do not support the POSIX stats pipeline).

**DistroAvatar.tsx / HostDetailsPanel.tsx**
- Add 8 network-device vendor icons (Cisco, Juniper, Huawei, HPE,
  MikroTik, Fortinet, Palo Alto, ZyXEL) alongside the existing
  Linux distro icons, with brand colors. Icons sourced from Simple
  Icons (CC0) where available; HPE and ZyXEL use simple
  abbreviation placeholders.
- Network device vendors are added to the manual distro override
  dropdown so users can pin an icon even if their device has an
  exotic banner we don't auto-detect.

**i18n**
- English + Chinese labels for the new vendor options in the
  Host Details distro selector.

Closes #674

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: gate network-device detection on raw host.distro, not manual icon override

Per Codex review on PR #680: the stats-polling gate was passing
`host` through getEffectiveHostDistro() before classifying, which
honors the manual distro override (`distroMode: 'manual'` +
`manualDistro`). That meant a user who previously pinned an
"ubuntu" icon on a host that later gets banner-detected as Cisco
would still be classified as linux-like and keep generating the
AAA session flood #674 is meant to eliminate.

Separate display from gating:
- Display (DistroAvatar, host cards): keeps using
  getEffectiveHostDistro so users can cosmetically override the
  icon.
- Gating (useServerStats via Terminal.tsx isSupportedOs): reads
  host.distro directly — the value populated by banner detection —
  alongside the explicit host.deviceType flag. Manual icon choice
  can no longer re-enable polling on a detected network device.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: guard distro detection against stale session timers

Per Codex review on PR #680: runDistroDetection is scheduled on a
600ms setTimeout after connection and also makes async calls of its
own. A quick disconnect + reconnect on the same session slot could
fire the old timer against the new session, reading host B's SSH
banner via getSessionRemoteInfo and writing host B's vendor onto
host A's distro field — wrong icon and wrong stats-polling state.

Follow the same pattern already used for the startup-command timer
in this file (scheduledSessionId captured at schedule time, checked
inside the timer). Capture `id` at schedule time, bail out if
ctx.sessionRef.current no longer matches, and re-check after every
async await inside runDistroDetection so that a reconnect during
the banner fetch or the os-release probe also bails cleanly.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address local codex review on PR #680

Addresses three issues found in a local Codex review pass after the
remote reviewer gate was flaky:

## P0 — session tokens instead of sessionId for stale-timer guard

The previous guard captured `id` returned from startSSHSession and
compared against `ctx.sessionRef.current` inside the setTimeout and
the async runDistroDetection. But the renderer passes
`sessionId: ctx.sessionId` into startSSHSession (see
createTerminalSessionStarters.ts:543), meaning a tab reuses the
SAME sessionId across disconnect+reconnect. The comparison
`T1 === T1` always passed, so the guard was a no-op.

Replaced with a module-level Map<sessionId, object> that stores the
live "connection token" for each sessionId slot. Each call to
startSSH mints a fresh `{}` token and overwrites the entry. Timers
and async continuations compare their captured token against the
current map value by reference — a reconnect replaces the map entry
with a new token, so stale callbacks bail cleanly.

## P1 — run os-release probe on the existing SSH connection

The fallback /etc/os-release probe used `execCommand` which creates
a brand-new SSHClient() on every call. On network devices that
present as plain `OpenSSH_*` and fall through to this step
(JUNOS, NX-OS, EOS) it added one extra full-auth AAA session log
entry per connect, in addition to the failing stats polls.

Added `getSessionDistroInfo(sessionId)` as a new IPC handler that
runs the same probe via `session.conn.exec()` — an exec channel on
the already-open connection, no new handshake. Plumbed through
preload.cjs, global.d.ts, and useTerminalBackend.ts.
runDistroDetection uses this instead of execCommand in the fallback
path, also removing the unused auth-credentials argument (we are no
longer opening a new connection, so no credentials are needed).

## P2.1 — don't re-arm timers after giving up

After the consecutive-failure counter trips, useServerStats cleared
the interval but a subsequent effect rerun (visibility change,
settings tweak, etc.) would schedule a fresh `setTimeout` and
`setInterval` that would just call the early-return path forever.

The scheduling block now checks `givenUpRef.current` before arming
either timer. The flag is still cleared on the normal disconnect /
sessionId-change reset path so a reconnect gets a fresh attempt.

## P2.2 — drop the ambiguous IPSSH-* → cisco mapping

Nmap's `match ssh m|^SSH-([\d.]+)-IPSSH-` line is labelled as
`Cisco/3com IPSSHd` — it cannot identify a specific vendor from the
banner alone. Mapping it to `cisco` would risk showing the wrong
vendor icon on a 3Com device. Removed the rule entirely and
documented why with a code comment; users with such devices can
still use the Host Details manual distro override.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address remaining gaps from local codex follow-up review

P0 gap — delete connection token on session exit. Previously the map
entry lingered after disconnect, so a very late-firing timer could
still pass the isConnectionTokenCurrent check even though the session
no longer existed. Functionally harmless (the IPC calls would fail)
but semantically wrong. Now connectionTokensBySessionId.delete() is
called in the onSessionExit handler.

P1 new — exec channel leak on timeout in getSessionDistroInfo. The
timeout branch resolved the promise but didn't close the stream, so
a hanging remote command would leave the exec channel open until the
SSH connection itself dropped. Added a settled guard (resolve-once)
and stream.close() on timeout.

P2.1 gap — givenUpRef not reset on sessionId change. The failure
counter reset only happened in the !isConnected branch of the main
effect, so a sessionId swap while still connected (rare, but
possible if the tab reconnects without toggling connected state)
would permanently suppress polling. Added a small dedicated effect
that resets both counters when sessionId changes.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-10 14:02:24 +08:00
陈大猫andClaude Opus 4.6 60071424d0 fix: prevent crash when clicking external links with no default browser (#676)
* fix: prevent crash when clicking external links with no default browser (#663)

On systems like Tiny11 where no default browser is associated with
http/https URLs, shell.openExternal() rejects with Windows error 0x483
("No application is associated..."). The main process treated that
rejection as an unhandledRejection, which the global handler re-throws
as fatal, crashing the entire app.

Root cause: windowManager.cjs used `void shell?.openExternal?.(url)`
inside a try/catch, assuming the try would cover the call. `void` only
discards the returned Promise — it does not catch async rejections,
so when openExternal rejected, the error escaped as a floating
unhandledRejection.

The IPC handler in main.cjs (`netcatty:openExternal`) also awaited
shell.openExternal() without any try/catch. Electron's ipcMain.handle
forwards rejections to the renderer over IPC, but the renderer-side
fallback called `window.open()`, which re-entered the same buggy
windowManager path — and that is where the process actually died.

Changes:
- windowManager.cjs: attach an explicit `.catch` on the openExternal
  Promise in both createExternalOnlyWindowOpenHandler and
  createAppWindowOpenHandler so rejections cannot propagate.
- main.cjs: wrap the IPC handler in try/catch and return a structured
  { success, error } result instead of throwing. This lets the
  renderer render an informative message.
- global.d.ts: update the openExternal return type to match.
- useApplicationBackend.ts: read the structured result and throw on
  failure so callers can react; drop the now-redundant window.open()
  fallback for the Electron branch (kept only for non-Electron envs).
- SettingsApplicationTab.tsx: show a friendly toast ("No default
  browser configured — please set one in system settings") when
  openExternal fails, instead of the previous silent failure.
- i18n: add en + zh-CN strings for the toast.

Closes #663

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* feat: fall back to in-app browser window when system has no default browser

Instead of showing a toast when shell.openExternal() fails (e.g. Tiny11
with no default browser), open the URL in a minimal in-app BrowserWindow
so users can still read the linked page.

windowManager.cjs now exposes:
- openFallbackBrowser(url, opts): creates a stripped-down BrowserWindow
  that loads the URL. No preload script (remote content must never
  touch contextBridge), contextIsolation/nodeIntegration/sandbox all
  set to safe defaults, and an isolated persist:netcatty-fallback-browser
  session so cookies and storage do not leak into the main app.
  Basic Alt+Left / Alt+Right / Ctrl-or-Cmd+R shortcuts for navigation
  and reload.
- tryOpenExternalWithFallback(shell, url, opts): tries
  shell.openExternal first; on rejection, falls back to
  openFallbackBrowser. Returns { success, fallback?: "in-app-browser" }.

All three external-URL call paths now route through this helper:
- main.cjs netcatty:openExternal IPC handler
- createExternalOnlyWindowOpenHandler (popup blocker for child windows)
- createAppWindowOpenHandler (main/settings window window-open handler)

The renderer-side toast is retained as a last-resort for the rare case
that both system and in-app browsers fail (e.g. BrowserWindow creation
error). Copy updated to reflect the new behavior.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: preserve rejection semantics for failed external opens

Per Codex review on PR #676: returning { success, error } from
bridge.openExternal changed the contract from "reject on failure" to
"resolve with a failure object on failure", which silently broke
callers that rely on rejection to abort flows.

useCloudSync's OAuth path is the clearest example: it wraps
bridge.openExternal in a try/catch and rejects browserPromise inside
the catch. With the resolved-failure contract, that catch never fires,
so Promise.race([callbackPromise, browserPromise]) can hang
indefinitely when no browser is available.

Revert the contract:
- tryOpenExternalWithFallback resolves void on success (system browser
  or in-app fallback) and throws on total failure
- main.cjs IPC handler awaits and lets rejections propagate
- global.d.ts openExternal is Promise<void> again
- useApplicationBackend just awaits — rejections propagate naturally
- SettingsApplicationTab's existing try/catch + toast continues to
  work as before

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: propagate fallback browser loadURL failures

Per Codex P2: openFallbackBrowser swallowed loadURL rejections by
attaching a .catch that only logged, so any caller using
tryOpenExternalWithFallback as a success signal saw an opened window
as success even when the page failed to load. OAuth flows would then
wait for the downstream callback timeout instead of canceling early
on malformed or unreachable URLs.

openFallbackBrowser now returns { window, loaded } where `loaded` is
the raw loadURL Promise, and tryOpenExternalWithFallback awaits it in
the fallback path. On initial load failure, the broken window is
closed and the original shell.openExternal error is re-thrown.

The internal popup handler inside the fallback window keeps its
fire-and-forget behavior (it must return synchronously) but now
explicitly catches the loaded rejection to avoid unhandledRejection.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-10 10:39:37 +08:00
陈大猫andClaude Opus 4.6 51abe7da63 fix: send SSH keepalive on idle SFTP sessions to prevent NAT drop (#669) (#671)
The main openSftp() connection path was building ssh2 connect options
without setting keepaliveInterval at all, so no SSH-level keepalive
packets were sent on the SFTP channel. When the SFTP panel sits idle
(the common case while a user browses files), NAT/firewall state
tables reap the idle TCP connection after ~30-60s, causing the panel
to disconnect while the SSH terminal next to it — which has its own
keepalive config via sshBridge — stays connected. That matches the
exact symptom reported in #669.

Default to a 10s keepalive interval, matching the existing SFTP jump
host path (sftpBridge.cjs:466-467). Honor an explicitly configured
positive options.keepaliveInterval (in seconds) if one is passed in,
so the frontend can thread the user setting through later without
another bridge change.

Closes #669

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
v1.0.86
2026-04-09 18:45:51 +08:00
9667c03ddc fix: pin toolbar above content on KeychainManager page (#666)
* fix: pin toolbar above content on KeychainManager page

* fix: apply panel offset to outer wrapper so toolbar is not covered

The aside panel is rendered as an absolute overlay (right-0, w-[380px]),
so any container covered by the overlay needs mr-[380px] to avoid
having its right-side controls obscured. Previously only the inner
scroll area had the offset, which left the toolbar at full width —
its right-side controls (view-mode dropdown, etc.) would be covered
by the panel and become unclickable when it opened.

Move both the margin and the transition to the outer flex wrapper so
the toolbar and the scroll area shift together when the panel opens.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: yuzifu <yuzifu@TB16PGen5.Info>
Co-authored-by: bincxz <16399091+binaricat@users.noreply.github.com>
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-09 17:14:41 +08:00
陈大猫andClaude Opus 4.6 9935eb2ed1 fix: preserve file permissions when saving edited file via SFTP (#667)
* fix: preserve file permissions when saving edited file via SFTP (#665)

ssh2-sftp-client's put() overwrites existing files with the server's
default mode (typically 0o666 after umask), so a 0o755 file edited
through the built-in text editor would silently become 0o666 after
save.

Stat the file before writing to capture its existing mode, then
chmod it back to that mode after put() completes. For new files,
stat fails and we fall through to let the server apply defaults,
preserving existing behavior for file creation.

Closes #665

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: also preserve setuid/setgid/sticky bits when restoring mode

Use 0o7777 mask instead of 0o777 so special permission bits are
preserved alongside the regular rwx bits — otherwise a 4755
executable would still be restored as 0755 after editing.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-09 17:04:10 +08:00
Eric Chan 268b698a39 Follow up #640 for the Snippets page (#662)
* Update snippets page to use inline aside panels

* Fix nested host editor overflow in selector panel
2026-04-09 15:21:55 +08:00
Eric Chan 2491d1a177 Shorten MCP approval timeout (#659) 2026-04-09 09:56:19 +08:00
陈大猫andClaude Opus 4.6 2bf2220d0b fix: open quick-add snippet modal in place instead of navigating (#657)
The previous "+" flow in ScriptsSidePanel switched the active tab to
Vault and jumped to the Snippets section, which ripped the user out
of their current terminal context — exactly what the feature was
supposed to avoid.

Replace the cross-panel navigation flow with a lightweight modal
dialog mounted at the App root:

- New component QuickAddSnippetDialog renders over everything and
  owns its own form state. Fields: label, command (multi-line), and
  package (combobox with allowCreate).
- App.tsx mounts the dialog globally and wires it to updateSnippets /
  updateSnippetPackages. No prop drilling through TerminalLayer.
- ScriptsSidePanel still dispatches the same netcatty:snippets:add
  window event; the dialog listens for it and opens in place.
- Reverted the navigateToSection / pendingSnippetAdd / openAddTrigger
  plumbing in App.tsx, VaultView, and SnippetsManager.

Advanced fields (targets, shortkey, tags) can still be set later
via the full Snippets manager. Cmd/Ctrl+Enter saves from any field.

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
v1.0.85
2026-04-09 02:10:34 +08:00
陈大猫andClaude Opus 4.6 683756324e feat: add "new snippet" button in terminal ScriptsSidePanel (#641) (#656)
* feat: add "new snippet" button in terminal ScriptsSidePanel (#641)

Previously, adding a new snippet required navigating back to the main
Snippets section from the Vault view. This adds a "+" button in the
search header of the terminal-side ScriptsSidePanel that jumps
directly into the snippet edit flow.

Flow:
- ScriptsSidePanel "+" → dispatches window event `netcatty:snippets:add`
- App.tsx listens → switches activeTab to vault, navigates to Snippets
  section, and bumps a monotonic `openSnippetAddTrigger` state
- VaultView forwards the trigger to SnippetsManager
- SnippetsManager watches the trigger and opens its add panel when
  the value changes (uses a ref to ignore unrelated remounts)

Closes #641

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: switch add-snippet flow to one-shot pending flag

Codex review pointed out a real bug with the monotonic trigger approach:
when SnippetsManager mounts for the first time with openAddTrigger already
non-zero (the common "+ clicked from terminal while not on Snippets section"
path), the last-seen-trigger ref is initialized to the current value and
the useEffect immediately returns early, so the add panel never opens.

Switch to a cleaner one-shot pending flag:
- App.tsx holds pendingSnippetAdd: boolean + handlePendingSnippetAddHandled
- VaultView forwards pendingSnippetAdd + onPendingSnippetAddHandled
- SnippetsManager opens the add panel on every transition to pendingAdd=true,
  then clears the flag via onPendingAddHandled, so subsequent renders and
  plain remounts are no-ops

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: move useCallback above early return in ScriptsSidePanel

React's rules-of-hooks require all hooks to be called unconditionally.
The new handleAddSnippet useCallback was placed after the
`if (!isVisible) return null;` guard, which tripped eslint.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-09 01:58:34 +08:00
陈大猫andClaude Opus 4.6 80fbf0da2f feat: add data-section hooks for Custom CSS targeting (#642) (#655)
Custom CSS already exists in Settings → Appearance, but major UI
components use only Tailwind utility classes, making it hard for
users to reliably target regions in their custom styles.

This adds stable `data-section="..."` attributes on the root element
of the most commonly customized UI regions so users can write selectors
like `[data-section="snippets-panel"] { font-size: 14px !important; }`
without depending on implementation details.

Instrumented regions:
- snippets-panel (ScriptsSidePanel)
- host-details-panel (HostDetailsPanel via AsidePanel dataSection prop)
- group-details-panel (GroupDetailsPanel)
- serial-host-details-panel (SerialHostDetailsPanel)
- ai-chat-panel (AIChatSidePanel)
- vault-view / vault-sidebar / vault-main / vault-hosts-header / vault-host-list (VaultView)
- terminal-workspace / terminal-workspace-sidebar (TerminalLayer)
- top-tabs (TopTabs — also keeps existing data-top-tabs-root)

Also updated the Custom CSS description and placeholder in both
English and Chinese to list available hooks and show a working
example (snippet panel font-size override).

Closes #642

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-09 01:38:50 +08:00
陈大猫andClaude Opus 4.6 556a14178c fix: prevent host details panel from being clipped on narrow windows (#653)
When the host details / new-host aside panel is open, narrow windows
could clip the panel content because the main area lacked min-w-0 and
the window had no minimum size.

- Add min-w-0 to the main area so flexbox can shrink the host list
  portion when the window narrows, keeping the 420px panel fully visible
- Set the BrowserWindow minWidth/minHeight to 1100x640 so the user
  cannot drag the window narrower than what the panel + sidebar +
  host list need to render comfortably
- Clamp previously saved window dimensions to the new minimum on launch
- Animate the New Host split button and the Terminal / Serial buttons
  to collapse with a 200ms transition when the host panel is open,
  freeing horizontal space and hiding controls that would be no-ops

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-08 17:04:55 +08:00
Eric Chan 7e566efe9c Add push-style host details panels (#649)
Refs: https://github.com/binaricat/Netcatty/issues/640
2026-04-08 16:42:32 +08:00
1d2489b02c feat: support long-running AI terminal jobs (#647)
* Add background terminal jobs for long AI commands

* Bound background job output buffering

* Fix long-running terminal job polling and stop behavior

* Fix terminal job final output and stopping retention

* Wait for PTY stop confirmation before cancelling

* fix: address codex review findings in PTY job refactor

- [P1] Use last occurrence of start marker to skip echoed wrapper command,
  preventing control markers from leaking into stdout
- [P1] Add wall-clock timeout for foreground PTY execution so commands that
  print continuously still get terminated at the configured limit
- [P2] Add hard deadline for cancellation so jobs that ignore Ctrl+C are
  force-finished after 30s instead of staying stuck in "stopping" forever

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-2 codex review findings

- [P1] Use visibleOutput for background job completion to keep offsets
  consistent with polling, preventing output loss when raw buffer
  (with ANSI codes) truncates earlier than the visible buffer
- [P2] Clarify system prompt that terminal_start requires PTY-backed
  sessions, so exec-only SSH sessions are not incorrectly routed

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-3 codex review findings

- [P1] Always strip markers from visibleOutput in background job finish
  to prevent end-marker lines leaking into terminal_poll results
- [P2] Correct terminal_execute timeout guidance from ~2min to ~60s to
  match the actual default commandTimeoutMs (60000)

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-4 codex review findings

- [P1] Delay session lock release when cancel is forced (process may
  still be running) to prevent sending commands into a busy shell
- [P2] Move scope validation before pendingSessionWriteApprovals so
  out-of-scope requests fail fast without blocking the write lock
- [P2] Add session scope checks to handleJobPoll and handleJobStop
  so chats that lose access cannot read output or cancel jobs

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-5 codex review findings

- [P1] Strip marker lines before they enter the bounded visible buffer
  so they never occupy space or leak as partial fragments on truncation
- [P2] Never release session lock after forced cancellation since the
  previous process may still be attached to the PTY

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-6 codex review findings

- [P2] Buffer incomplete marker lines across PTY chunks to prevent
  partial marker fragments from leaking into visible output
- [P1] Release session lock after 60s delay on forced cancel as
  compromise between safety and permanent lock
- [P2] Enforce session scope checks on jobPoll/jobStop for both
  dynamic (chatSessionId) and static (NETCATTY_MCP_SESSION_IDS) modes

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-7 codex review findings

- [P2] validateSessionScope now accepts explicit scopedSessionIds so
  static MCP scope mode is enforced for jobPoll/jobStop too
- [P2] Apply per-session execution lock to netcatty:ai:exec IPC path
  so it cannot race with active background jobs on the same session

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-8 codex review findings

- [P1] Make wall-clock timeout opt-in via enforceWallTimeout flag,
  enabled only for MCP terminal_execute path. Catty Agent's
  netcatty:ai:exec keeps the inactivity-based timeout since it has
  no terminal_start fallback for long-running streaming commands
- [P2] Always allow handleJobStop regardless of session scope so
  the per-session execution lock can always be released after
  workspace membership changes

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-9 codex review findings

- [P1] Enable enforceWallTimeout for netcatty:ai:exec to match the
  pre-PR behavior (hard wall-clock deadline). Without this, tail -f
  or verbose builds would hold the session lock indefinitely
- [P2] Treat explicit scopedSessionIds=[] as no access rather than
  falling through to global scope, matching handleGetContext's
  documented behavior

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-10 codex review findings

- [P2] Add bounded startup deadline (30s) for the start marker arrival
  even when wall-clock timeout is disabled. Prevents background jobs
  from hanging indefinitely on already-chatty PTY sessions
- [P3] Use job-specific marker (not generic __NCMCP_) when stripping
  marker lines, so user output containing __NCMCP_ is preserved

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-11 codex review findings

- [P2] Skip the 30s startup timeout for foreground execViaPty paths.
  It now applies only when maxBufferedChars > 0 (background jobs),
  so foreground commands queued behind a busy shell can wait
- [P2] Return empty stdout from getSnapshot() before the start marker
  arrives, so an early poll cannot advance nextOffset past pre-start
  PTY noise that gets discarded once the real command begins

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-12 codex review findings

- [P1] Treat empty chat scopes as no access in validateSessionScope:
  if a chat has explicit scoped metadata (even []), enforce strictly
  rather than falling through to fallback/global scope
- [P2] Re-add session scope check in handleJobStop for static MCP
  clients (scopedSessionIds), while still allowing dynamic chat-scoped
  callers to always stop their own jobs even after scope changes

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-13 codex review findings

- [P2] getScopedJob now requires the caller to present the job's
  chatSessionId. Unscoped/static callers cannot reach into another
  chat's background jobs even if they learn the jobId
- [P2] Stop button no longer cancels terminal_start background jobs.
  They are intentionally long-running, so killing them on every
  per-response stop defeats the purpose of the feature. Cleanup on
  chat deletion (cleanupScopedMetadata) is preserved

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-14 codex review findings

- [P1] terminal_start jobs no longer registered in activePtyExecs so
  ACP "Stop" / cancelPtyExecsForSession does not kill them. They are
  still managed via terminal_stop and the per-session execution lock
- [P1] Remove enforceWallTimeout from netcatty:ai:exec since Catty
  Agent has no terminal_start fallback for long-running commands.
  Inactivity timeout still catches genuinely hung processes
- [P2] Forced-cancelled jobs stay in "stopping" (completed=false)
  until the 60s lock grace period ends, so callers don't see the
  job as completed while the session is still locked

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-15 codex review findings

- [P2] Allow netcatty/jobStop to bypass the chat-cancelled gate so
  users can stop terminal_start jobs even after ACP "Stop" was pressed
- [P2] Mark non-zero exit codes as failed (not completed) so callers
  don't have to special-case exitCode against status
- [P2] Pre-start cancel: clear startup timer in requestCancel and
  detect prompt return on preStartOutput so a queued job that gets
  cancelled resolves as "Cancelled", not "startup timed out"

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-16 codex review findings

- [P2] Cap preStartOutput for background jobs at maxBufferedChars so
  noisy idle PTYs cannot accumulate megabytes before the start marker
  arrives or the startup timeout fires
- [P2] On forced cancel, immediately release the session lock and
  mark the job as cancelled. The error message clearly states that
  the process may still be running, and the caller sees completed=true
  exactly when the lock is no longer held — consistent semantics

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-17 codex review findings

- [P2] Disable prompt-suffix completion fallback for background jobs.
  Long-running commands often print prompt-like text (nested shells,
  ssh, sudo -s, REPLs) and would otherwise be misdetected as completed.
  Background jobs rely strictly on the end marker
- [P2] consumeVisibleText now treats \\r as a carriage return that
  resets the current line, so progress bars (npm, docker pull, curl)
  collapse to the latest frame instead of accumulating every redraw

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-18 codex review findings

- [P2] Pre-start cancel on sessions without a tracked idle prompt now
  gets a 2s fallback to finish as Cancelled, instead of waiting the
  full forced-cancel window for an end marker that will never arrive
- [P3] Move session-scope validation before the busy-session check so
  out-of-scope callers cannot probe the existence/activity of foreign
  sessions via busy-state error messages

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-19 codex review findings

- [P1] Re-enable prompt-suffix completion fallback for background
  jobs but with a longer 10s delay so nested shells / REPLs have
  time to print past their initial prompt before the recheck
- [P2] Carriage returns now collapse progress redraws across PTY
  chunks: \\r is preserved through consumeVisibleText and
  applyCarriageReturns erases the trailing line of visibleOutput
  when a chunk starts with \\r. Verified with a fake PTY that
  emits "10%" then "\\r20%" then "\\r30%\\n" — final output is "30%"

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-20 codex review findings

- [P1] Disable prompt-suffix completion fallback for background jobs.
  Commands that open child shells with the same prompt as the parent
  (bash, zsh, sudo -s, ssh) would otherwise be reported as completed
  while the child is still running. Background jobs rely strictly on
  the end marker, with their long timeout and explicit terminal_stop
- [P2] Track a monotonic visibleHighWatermark so polling nextOffset
  cannot move backwards across CR redraws. serializeBackgroundJob now
  returns the latest visible frame when the caller's offset has been
  passed by a redraw, instead of returning empty stdout permanently
- [P3] Buffer trailing lines that contain the constant __NCMCP_
  prefix (not just the full random marker token) so PTY chunk
  boundaries that split the marker mid-token cannot leak _E:0 noise

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-21 codex review findings

- [P2] Foreground execs now also get a hard startup deadline (using
  the configured timeoutMs as the limit). Background jobs use a
  fixed 30s. Without this, an already-chatty PTY would let onData
  re-arm the inactivity timer forever before _S arrives
- [P2] finish() now uses the monotonic visibleHighWatermark for
  totalOutputChars on completion, so the final poll's nextOffset
  cannot regress relative to earlier polls after CR redraws

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-22 codex review findings

- [P2] cleanupScopedMetadata now also calls clearPendingApprovals so
  in-flight approval requests resolve immediately. Otherwise a chat
  deleted while an approval was pending would leave the per-session
  write lock held until the 5-minute approval timeout expires
- [P2] Allow netcatty/jobStop in observer mode so users can stop
  long-running terminal_start jobs that were launched before they
  switched to observer mode

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-23 codex review finding

- [P2] Apply \\r as a "deferred" carriage return: park the cursor at
  the start of the line but defer erasure until the next character
  arrives. This preserves the latest visible frame for commands like
  printf '10%%\\r'; sleep; printf '20%%\\r' that pause between
  redraws, while still collapsing continuous progress redraws to a
  single frame. Verified: snapshots now show '40%' and '50%' instead
  of empty stdout

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-24 codex review findings

- [P1] Re-enable prompt fallback for background jobs with a 30s
  delay so commands open child shells / REPLs have time to print
  past their initial prompt before the recheck. This is the third
  time codex has flip-flopped on this — 30s is the compromise
- [P2] Pass chatSessionId to execViaChannel in handleExec so
  cancelPtyExecsForSession can interrupt SSH exec-channel commands
  scoped to the originating chat

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-25 codex review finding

- [P1] Stop in-place CR collapsing in visibleOutput. The collapsed
  buffer made polling offsets non-monotonic and could drop finalized
  lines after a CR rewrite. Now visibleOutput stores raw bytes (with
  \\r dropped at consumeVisibleText to keep the buffer simple), the
  256KB cap naturally bounds progress-bar accumulation, and slice
  semantics work correctly across all redraw patterns. Consumers
  that want a "collapsed view" can post-process

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-26 codex review findings

- [P2] Carriage returns are now preserved in the raw buffer and
  collapsed at serialize time in collapseCarriageReturns. This keeps
  monotonic offsets in the buffer while polled output shows the
  latest progress frame. A trailing \\r leaves existing content
  intact (deferred erasure semantics)
- [P2] netcatty/jobStop now bypasses the confirm-mode approval gate
  so a runaway terminal_start job can always be interrupted, even
  when the renderer is unavailable
- [P3] requestCancel's one-shot timers (2s pre-start, 150ms reinforce,
  30s force-finish) are now tracked and cleared in finish() so they
  cannot keep the Node event loop alive after the job has resolved

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: bincxz <16399091+binaricat@users.noreply.github.com>
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-08 16:39:21 +08:00
陈大猫andClaude Opus 4.6 5ad3d0ce32 fix: prevent crash when codex-acp binary is not found (#648)
* fix: prevent crash when codex-acp binary is not found (#645)

When codex-acp is not installed, resolveCodexAcpBinaryPath returned the
bare binary name as a fallback. This caused createACPProvider to spawn a
non-existent process, emitting an async ENOENT error that crashed the app.

Return null instead of the bare name and guard all createACPProvider call
sites so the error is handled gracefully.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: install cross-platform codex-acp binaries in CI build

macOS and Windows CI builds produce both arm64 and x64 packages, but
npm ci only installs optional dependencies for the host platform. This
means the codex-acp native binary for the other architecture is missing
from the packaged app, causing ENOENT crashes for users on the
non-host architecture.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: add --force to bypass cpu/os constraints for cross-arch install

The platform-specific codex-acp packages declare cpu/os constraints in
their package.json, so npm refuses to install the non-host-arch binary
with EBADPLATFORM. Use --force to bypass this check.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-08 10:53:27 +08:00