Commit Graph
2049 Commits
Author SHA1 Message Date
bincxzandClaude Opus 4.8 9e7f6d98fd fix(et): fail loudly on missing/over-long jump chain in startEt
Copilot review: startEt only checked resolvedChainHosts.length, so a
configured jump chain that failed to resolve (missing/invalid host ID) would
silently fall back to a direct connection — possibly to the wrong target —
unlike startSSH, which explicitly rejects missing chain host IDs.

Add the same getMissingChainHostIds check startSSH uses, erroring early with
a clear message when a configured jump host cannot be resolved. Also base the
"at most one jump host" limit on the configured chain (host.hostChain.hostIds)
rather than only the resolved list, so a second hop whose ID fails to resolve
cannot slip past the check.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-03 15:17:32 +08:00
bincxzandClaude Opus 4.8 ceda20510f fix(et): run Unix askpass via Electron exec and route jumps through ET --jumphost
Addresses two correctness issues from the codex review of the ET protocol
support.

codex P1 #1 (Unix askpass helper): on macOS/Linux the SSH_ASKPASS helper
was the askpass .cjs itself, relying on its `#!/usr/bin/env node` shebang.
Packaged Electron builds put no `node` on the user's PATH, so ssh could not
run the helper and ET could not supply the saved password / key passphrase,
failing the connection outright. Mirror the existing Windows .cmd wrapper:
write a small /bin/sh wrapper that execs the helper through process.execPath
with ELECTRON_RUN_AS_NODE=1 (process.execPath is POSIX single-quoted to
survive spaces in an .app path).

codex P1 #2 (jump host routing): a jumped ET host only got an ssh
ProxyCommand, which fixes the SSH bootstrap but leaves ET opening its TCP
socket straight at the destination etserver — which fails whenever the
destination ET port is not directly reachable. Use ET's own
--jumphost/--jport so ET connects its socket to the jumphost's etserver and
reaches the destination over the SSH tunnel ET sets up (`ssh -J`). Per-hop
jump credentials move from the ProxyCommand into a `Host <jumphost>` ssh_config
block (OpenSSH applies command-line -o only to the final hop, so jump settings
must come from config); the destination's comma/space options are scoped under
a `Host <dest>` block with a ProxyJump so the standalone ssh used for distro
detection tunnels through the jump too.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-03 15:17:26 +08:00
lateautumn233 82f3250b5b Bundle ET client binaries in package build workflow
Mirror the existing mosh bundling pipeline so that release and tag
builds automatically fetch and package the EternalTerminal `et`
client alongside mosh-client.
2026-06-03 12:35:50 +08:00
lateautumn233 62ec391523 Add ET integration checklist
Document the implementation status of EternalTerminal integration
across all layers (domain, electron, application, components, i18n)
with testing notes and known limitations.
2026-06-03 01:55:06 +08:00
lateautumn233 7927da2085 Build ET UI: host settings panel, protocol picker, and session starters
Add ET configuration section in HostDetailsAdvancedSections (etPort,
etTerminalPath). Add ET option to ProtocolSelectDialog. Wire ET session
creation in createTerminalSessionStarters with proxy and multi-jump
validation. Add ET badges and labels in Terminal, TerminalToolbar,
TerminalConnectionDialog, and TerminalLayerSupport. Propagate ET
settings through GroupDetailsPanel, GroupSshSettingsSection, and
VaultView.
2026-06-03 01:45:29 +08:00
lateautumn233 d45dea4bff Add ET localization strings for en and zh-CN
Terminal: protocol label, proxy-unsupported warning, multi-jump
limitation notice. Vault: ET settings section title, etPort and
etTerminalPath field labels with descriptions.
2026-06-03 01:45:28 +08:00
lateautumn233 816e274dfc Route ET protocol through application session state and backend
Resolve 'et' protocol in tray panel and host connection handlers with
priority over mosh. Propagate etEnabled through session factories and
useSessionState. Expose etAvailable guard and startEtSession wrapper
in useTerminalBackend.
2026-06-03 01:45:28 +08:00
lateautumn233 1a20a6a4a8 Expose startEtSession IPC channel via preload and bridge types
Add startEtSession to the preload API surface, routing through the
netcatty:et:start IPC channel. Define the startEtSession options type
in netcatty-bridge-session.d.ts with ET-specific parameters (etPort,
terminalPath, jumpHosts, etc.).
2026-06-03 01:45:28 +08:00
lateautumn233 910049b0ea Implement etSession process manager and bundled ET client resolver
Add etSession.cjs: full ET session lifecycle including SSH bootstrap with
host-key verification, etclient PTY spawning, temp directory management,
and external auth artifact cleanup. Wire the session API into
terminalBridge.cjs with IPC handler registration. Add bundledEtClient
resolver that locates the platform-specific et binary in both packaged
and dev environments. Include unit tests for both etSession and
bundledEtClient.
2026-06-03 01:45:28 +08:00
lateautumn233 173a83aafa Extend HostProtocol union and host models with ET fields
Add 'et' to HostProtocol union type. Add etEnabled, etPort, and
etTerminalPath fields to Host and GroupConfig interfaces. Update
vaultImport type guards to exclude 'et' from importable protocols.
Register ET fields in groupConfig inheritable keys.
2026-06-03 01:45:28 +08:00
lateautumn233 95208294b0 Bundle the prebuilt et client at pack time
Download and package the et binaries produced by build-et-binaries:

- resolve-et-bin-release picks the latest et-bin-* release; fetch-et-binaries
  downloads the platform client into resources/et/, verifying SHA256SUMS.
- et-extra-resources emits the electron-builder extraResources entry only
  when the binary is on disk, so pack still works without a bundled et.
- electron-builder.config.cjs wires et into the mac/win/linux bundles;
  package.json adds the fetch:et scripts.
2026-06-02 20:35:07 +08:00
lateautumn233 a4bf2234cd Add build-et-binaries workflow to compile the et client
Build the EternalTerminal `et` client in CI the way mosh-client is:

- build-et-binaries.yml builds et for linux x64/arm64, macOS universal
  and windows x64, uploads artifacts, and optionally publishes them to a
  dedicated binary repository on manual workflow_dispatch.
- scripts/build-et/{linux,macos,windows} compile et from upstream.
- .gitignore excludes the fetched binaries; resources/et/README.md
  documents source provenance.
2026-06-02 20:35:07 +08:00
陈大猫 031bf0ee45 Merge pull request #1188 from binaricat/codex/vault-sidebar-spacing
[codex] Balance vault sidebar spacing
v1.1.20
2026-06-02 01:29:14 +08:00
bincxz 0efe80b06d Balance vault sidebar spacing 2026-06-02 01:28:39 +08:00
陈大猫 3fb7c6dd21 Merge pull request #1183 from pplulee/feature/codesnip-edit
feat: 优化代码片段脚本编辑
2026-06-02 01:17:36 +08:00
bincxz c7e4ac82ca Fix snippet editor focus outline 2026-06-02 01:15:36 +08:00
bincxz d5e29598d3 Merge main into PR 1183 and address review 2026-06-02 01:07:04 +08:00
陈大猫 fca7782634 Remove vault content left margin (#1187) 2026-06-02 01:00:19 +08:00
Pyro 42b23a9faa fix: blurry inline aside panel rendering (#1185) 2026-06-02 00:40:17 +08:00
Pyro 06011d01d6 fix: update RU localization (#1184) 2026-06-01 23:31:03 +08:00
pplulee 4bf4e65df8 fix(keychain): enhance key management UI with copy, edit, and delete actions (#1182) 2026-06-01 23:13:31 +08:00
pplulee 45e62ed43e feat(snippets): add SnippetScriptEditor component and update usage in dialogs 2026-06-01 23:05:56 +08:00
陈大猫 368c31e48d Remove default host seed data
Remove seeded example hosts so new installs start with an empty vault.
v1.1.19
2026-06-01 21:09:04 +08:00
陈大猫 0fa926de26 Polish vault UI (#1177) 2026-06-01 21:03:43 +08:00
陈大猫 b9b7db2a4e fix kimi tool stream parsing (#1176) 2026-06-01 19:42:42 +08:00
陈大猫 e3f68e1a3f [codex] fix cloud sync master key refresh (#1175)
* fix cloud sync master key refresh

* Protect first sync from default settings

* Avoid recovery prompt for settings-only sync

* Cancel stale syncs after master key changes
2026-06-01 19:29:53 +08:00
陈大猫 3c4746aea0 [codex] add sync reliability metadata (#1174)
* feat: add sync reliability metadata

* fix: preserve tombstones from checked remotes

* fix: keep conflict change counts typed
2026-06-01 18:40:19 +08:00
陈大猫 463dd4464f [codex] add cloud sync strategies (#1171)
* feat: add cloud sync strategies

* chore: clarify cloud sync strategy options

* chore: keep selected sync strategy concise

* fix: sync cloud-wins payload to remaining providers

* fix: apply cloud sync strategy during startup

* fix: retry partial startup cloud syncs
2026-06-01 17:07:07 +08:00
陈大猫 63b95bb68e [codex] add terminal font size shortcuts 2026-06-01 15:25:31 +08:00
陈大猫 ea41389842 Fix Ruijie network device detection (#1168) 2026-06-01 13:52:22 +08:00
Jerry 429cb8d6e9 fix: keep macOS Dock icon consistent with bundle icon (#1166) 2026-06-01 13:05:07 +08:00
陈大猫andClaude Opus 4.8 55faae767a feat(vault): show/hide toggle for the host Telnet password (#1164)
* feat(vault): show/hide toggle for the host Telnet password

Issue #1099 (part 2): the host-level Telnet password field was a bare type="password" with no way to reveal it. Add an eye toggle matching the SSH password field and the group-level Telnet password.

Refs #1099

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>

* fix(vault): reset Telnet password reveal when the edited host changes

HostDetailsPanel is reused across hosts without remounting, so the new showTelnetPassword state has to be cleared in the initialData effect alongside showPassword — otherwise revealing one host's Telnet password leaves the next host's shown unmasked.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-01 12:56:51 +08:00
陈大猫andClaude Opus 4.8 94b8f298ae feat(vault): connect with the host's default protocol, prompt only for Telnet (#1163)
Issue #1099: a Telnet host shows the protocol picker on every connect. Connect resolution is now explicit, and the picker only appears when it's genuinely a choice:

- Telnet set as default (protocol = telnet) -> connect Telnet (single-click and batch)
- Telnet enabled but not the default -> show the picker (unchanged)
- Mosh enabled -> connect Mosh
- otherwise -> connect SSH

A "Connect with Telnet by default" switch in the Telnet card sets the host's primary protocol. SSH+Mosh hosts now connect Mosh directly instead of prompting every time. Addresses part 1 of #1099.

Refs #1099

Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-01 12:38:14 +08:00
陈大猫andClaude Opus 4.8 1ef3f9f979 feat(vault): batch-connect selected hosts (#1162)
The multi-select toolbar already supported batch delete; add a "Connect" button next to it so connecting many hosts no longer has to be done one by one. Connects each selected host in list order with its configured protocol (multi-protocol hosts use their default rather than prompting per host).

Closes #870

Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-01 11:16:01 +08:00
陈大猫andClaude Opus 4.8 e88313eb84 fix(sftp): confirm delete/overwrite dialogs on Enter key (#1160)
The delete and overwrite confirmation dialogs are opened from a context menu, whose focus-return could leave focus outside the dialog, so pressing Enter did nothing. Focus the confirm button when each dialog opens via onOpenAutoFocus so Enter activates it. Esc and Tab+Enter behavior is unchanged.

Fixes #1150

Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-01 10:21:55 +08:00
pplulee 03cd9bc968 feat(snippets): implement snippet variable handling and UI prompts (#1159) 2026-05-31 18:01:43 +08:00
pplulee 4d7c56e537 主机备注功能与脚本编辑体验优化 (#1158) 2026-05-31 15:39:26 +08:00
Jerry 4769668ff9 docs: add CLAUDE.md and untrack from .gitignore (#1149) 2026-05-29 16:23:59 +08:00
陈大猫andClaude Opus 4.8 8ca36a695b fix(ssh): repair mangled PEM private keys before parsing (#1147)
* fix(ssh): repair mangled PEM private keys before parsing

A valid PEM key whose framing was damaged in transit — newlines
collapsed to spaces, turned into literal "\n", or lines indented —
fails ssh2's parser with "Unsupported key format" even though the key
material is intact. This commonly happens when a key is copy/pasted
through a field or app that strips line breaks. (follow-up to #1139)

When parsing fails, rebuild clean PEM framing from the BEGIN/END markers
(which survive newline loss) and the base64 body, then retry through the
existing parse and PKCS#8 conversion paths. The body is preserved
byte-for-byte and a repaired key is only used if it re-validates, so
this can never produce a different or invalid key. Encrypted legacy PEM
(Proc-Type/DEK-Info) and truncated keys are left untouched.

Refs #1139

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>

* fix(ssh): detect encryption on mangled OpenSSH keys

A mangled encrypted OpenSSH key (line breaks flattened to literal "\n")
was not recognized as encrypted: the literal escapes corrupt the base64
decode used to read the cipher name, so isKeyEncrypted() returned false
and preparePrivateKeyForAuth routed the key to the unencrypted branch
with no passphrase prompt — and the repaired candidate was discarded
because it can't parse without one.

Repair the PEM framing before reading the OpenSSH cipher name, so such
keys are detected as encrypted and reach the passphrase prompt, where
normalizePrivateKeyForSsh2(key, passphrase) already repairs and
validates them. Addresses Codex review feedback on #1147.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
2026-05-29 15:45:56 +08:00
陈大猫andClaude Opus 4.8 053a976d37 fix(ssh): support PKCS#8 private keys by converting for ssh2 (#1146)
ssh2's key parser only accepts OpenSSH, legacy PKCS#1/SEC1 and PuTTY
keys, so PKCS#8 keys (-----BEGIN PRIVATE KEY----- / BEGIN ENCRYPTED
PRIVATE KEY) fail with "Cannot parse privateKey: Unsupported key
format" even though they are valid and work in other clients such as
Termius. (#1139)

Add privateKeyNormalizer: when ssh2 can't parse a key but it is PKCS#8,
read it with Node's crypto and re-export RSA->PKCS#1 / EC->SEC1, the
legacy PEM forms ssh2 understands. Encrypted PKCS#8 is decrypted with
the passphrase first. Ed25519 (and other) PKCS#8 keys, which have no
legacy PEM form, now surface a clear "convert with ssh-keygen" message
instead of ssh2's opaque error.

Wired into sshAuthHelper's preparePrivateKeyForAuth and
loadIdentityFileForAuth, so SSH, SFTP and port-forwarding all benefit.
Also fixes a latent bug where a correct passphrase on an encrypted
PKCS#8 key was rejected and re-prompted indefinitely.

Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
2026-05-29 15:09:52 +08:00
陈大猫 40fb5b62a9 Fix storage change render warning (#1138) v1.1.18 2026-05-28 15:40:04 +08:00
陈大猫 1fec5925eb Refactor large modules and fix runtime errors (#1136) 2026-05-28 15:12:19 +08:00
陈大猫andClaude Opus 4.7 23d4b342b9 fix(vault): flat Vaults tab selection + fill host grid beside side panel (#1134)
- TopTabs: the Vaults root tab no longer paints an active background fill when
  selected (text/icon still brighten). Clear the imperatively-set hover fill on
  click so it can't get stuck when active bg stays transparent.
- VaultView: when the host side panel is open, drive the grid column count from
  the container width as a fixed N columns instead of viewport-based grid-cols-*
  (which can't see the narrowed area) or auto-fit+1fr (which stretched a lone
  card across the whole row). Fills the row with no trailing gap and keeps a
  single card at one column's width. The count rides on a CSS variable set
  imperatively via ResizeObserver, so reflowing the grid never re-renders this
  large component.

Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
2026-05-28 11:54:30 +08:00
陈大猫 2c716cd74c fix packaged MCP blocklist assets (#1132) 2026-05-28 10:49:20 +08:00
陈大猫andClaude Opus 4.7 6c23514d84 fix(ai): prefix wrapped AI commands with a leading space (#1129)
Netcatty's AI / Skill+CLI integration sends marker-wrapped commands
(__NCMCP_xxx=0; { ... eval ...; }) straight into the user's interactive
shell. preload.cjs filters the PTY echo of those wrappers from the
visible terminal, but they still land in ~/.bash_history — making the
user's shell history hard to read after each AI session (#1126 user
report on v1.1.16).

Prefix the POSIX (bash/zsh/dash) and fish wrappers with a single space.
On the shells/configurations that already honor "ignore leading-space"
in history recording, those wrappers now skip the history file
entirely:

- bash with HISTCONTROL containing `ignorespace` (Debian/Ubuntu default
  via /etc/bash.bashrc, also part of `ignoreboth` which is the most
  common explicit setting)
- zsh with HIST_IGNORE_SPACE set (Oh-My-Zsh and most prezto templates
  enable this)
- fish with a user-defined fish_should_add_to_history function (opt-in
  via fish config)

Known limitations (no behavior change needed on netcatty's side):

- bash on bare RHEL/CentOS ships HISTCONTROL=ignoredups by default —
  leading space is not honored. Users on those distros can opt in with
  `HISTCONTROL=ignoreboth` in their ~/.bashrc.
- zsh without HIST_IGNORE_SPACE: same; add `setopt HIST_IGNORE_SPACE`.
- Fish without a custom history filter: leading space is not honored.
- PowerShell, cmd, network-device CLIs: unaffected (their wrappers are
  not changed, and the persistent-history semantics differ).

This is intentionally a minimal change — 4 characters of behavior plus
the explanatory comments. We rely on the user's existing shell config
instead of trying to mutate HISTCONTROL ourselves at session start,
which would either be visible in the terminal echo, mis-fire on hosts
that already had ignorespace (deleting a real previous history entry),
or error on non-POSIX shells.

Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
v1.1.17
2026-05-28 01:02:18 +08:00
陈大猫andClaude Opus 4.7 456ddcfe68 chore(ai): upgrade ACP packages and unwrap Skill+CLI command in tool-call panel (#1128)
* chore(ai): upgrade ACP packages and unwrap Skill+CLI command in tool-call panel

Package bumps:
- @zed-industries/claude-agent-acp 0.22.2 → @agentclientprotocol/claude-agent-acp 0.37.0
  (old npm package is deprecated; scope rename)
- @zed-industries/codex-acp 0.10.0 → 0.15.0
- @mcpc-tech/acp-ai-provider 0.2.8 → 0.3.3
- electron-builder asarUnpack glob + bridge require.resolve switched to the new scope

After the upgrade Codex tool-call cards started showing the local
worktree path for every step — "Run /Users/.../netcatty-tool-cli session
--session …" — instead of the remote command. Three things lined up:

1. The new acp-ai-provider maps ACP's `title` to `toolName`, and Codex's
   title is the full shell invocation it's about to run.
2. Codex local_shell ships args as ["/bin/zsh","-lc","<full>"], so the
   old `typeof args.command === 'string'` branch in ToolCall never fired
   and we fell through to printing `name` (i.e. the title).
3. The bridge serializes tool args under `args`, but the ACP adapter
   only read `event.input`, so even when args were available the
   renderer received {}.

Fixes:
- acpAgentAdapter: read tool input from both `event.input` and
  `event.args` so bridge-serialized chunks and direct AI SDK chunks
  both work.
- ai-elements/tool-call: new extractDisplayCommand() unwraps the shell
  array, then the netcatty-tool-cli wrapper (exec/job-start … -- <cmd>),
  and renders the real remote command. session/env/job-poll/etc. fall
  back to short labels ("netcatty: inspect session", …) instead of
  exposing the binary path.
- shellUtils.cjs: defensive JSON-parse the ACP wrapper input in case
  the AI SDK ever stops auto-parsing it.

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>

* fix(build): exclude bundled Claude CLI binaries from the installer

@anthropic-ai/claude-agent-sdk@0.3.x bundles the native Claude Code CLI
(~211MB per arch) as optional sibling packages. Including them would
silently regress Netcatty's "bring your own Claude" design — the project
has always required users to install Claude Code locally, and the entire
path-discovery flow exists precisely to honor that contract:

- useAgentDiscovery.ts scans the user's PATH for `claude` and writes
  the absolute path into the agent config's CLAUDE_CODE_EXECUTABLE env.
- aiBridge.cjs runs normalizeClaudeCodeExecutableEnvForAcp on every ACP
  spawn, forwarding the env var to the child process.
- The @agentclientprotocol/claude-agent-acp wrapper's claudeCliPath()
  (acp-agent.js) prefers process.env.CLAUDE_CODE_EXECUTABLE over the
  bundled binary and only falls back to sibling-package resolution when
  the env var is empty.

So the right place to enforce the design is electron-builder: exclude
node_modules/@anthropic-ai/claude-agent-sdk-* from `files`. Dev mode is
unaffected (optional deps still install for `npm run dev`); only the
packaged installer drops the binaries, saving ~150MB. Users without
Claude Code installed get the same SDK error they got pre-upgrade.

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
2026-05-27 23:26:14 +08:00
陈大猫andClaude Opus 4.7 2a283a4f83 fix(ai): run bundled claude-agent-acp via Electron's Node (#1127)
@zed-industries/claude-agent-acp ships dist/index.js with a
`#!/usr/bin/env node` shebang. We bundle the package and unpack it from
asar, but Windows ignores the shebang entirely and macOS/Linux only
honours it when `node` is on the user's PATH. When `node` was missing,
the resolver fell back to spawning the bare `claude-agent-acp` command,
which only works if the user manually ran
`npm install -g @zed-industries/claude-agent-acp` — see #1118.

Run the bundled script through `process.execPath` with
`ELECTRON_RUN_AS_NODE=1` (matching `resolveMcpServerRuntimeCommand` in
the MCP server bridge) so the embedded Electron acts as the Node
runtime. This makes the bundled copy work with zero external deps on
every supported platform.

Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
2026-05-27 21:50:54 +08:00
陈大猫 b29533259b fix(terminal): probe cwd via SSH_CONNECTION on older OpenSSH (#1123) (#1125) 2026-05-27 18:09:21 +08:00
Pyroandpyroch 0f8aa08994 (fix) autocomplete popup visible after sending command (#1121)
Co-authored-by: pyroch <cvdysh@gmail.com>
v1.1.16
2026-05-27 16:37:21 +08:00
陈大猫andClaude Opus 4.7 fb522c5016 fix(ai): keep chat input toolbar on one row when sidebar is narrow (#1122)
When the AI sidebar is dragged narrow, the model chip used to wrap
to its own line (and the perm chip to a third line), wasting vertical
space. Switch the toolbar from flex-wrap to a single-row flex container
where the +/perm chips stay shrink-0 and the model chip absorbs all
the squeeze via min-w-0, letting the existing truncate kick in and
ellipsize the model label instead of wrapping.

Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
2026-05-27 16:35:31 +08:00