Re-check cancel inside setTransfers so late cancels are not overwritten,
keep partial progress on cancelled directory downloads, and clear the
pre-start cancel latch on intentional resume/retry.
* fix(ui): open AI silent sessions in an attach terminal popup
Tray jumps for hidden MCP sessions attach the existing terminal popup
to the live PTY instead of activating a tab-less main-window surface.
Output is rebound to the popup and restored when the popup closes.
* fix(terminal): register rebindOutput handlers under worker mode
Worker-enabled builds returned early from terminalBridge.registerHandlers
without registering rebind/restore IPC, so the first AI silent-session
attach popup always failed with "No handler registered". Register those
handlers in both paths and rebind display routing via terminalWorkerManager.
* fix(terminal): harden AI attach popup for worker mode lifecycle
Address codex review P1s: resume flow control before restoring output,
route exit/events to the rebound renderer, and replay home scrollback
via a snapshot request before rebinding display output.
* fix(terminal): restore attach routing on popup close and dual-notify exit
Hardening for AI observe popups: restore output from BrowserWindow closed
lifecycle (not only React cleanup), keep attach home for exit events so
main/tray lifecycle updates, and resume paused backend flow on attach.
* fix(terminal): resume flow on attach restore and close snapshot gaps
Resume backend output when attach popups are force-closed, fan out
lifecycle exit events to home+display in non-worker mode, and pause
during snapshot→rebind so live bytes are not dropped from the popup.
* fix(terminal): harden attach restore and worker lifecycle edges
Prefer live display for ZMODEM dialogs after rebind, dual-notify worker
crash exits to attach-home, and avoid clearing attach-home when restore
targets a dead renderer.
* fix(terminal): sync observe-popup state home and fan out SSH exits
Push popup serializations home before restore, fall back to hibernate
snapshots, settle briefly after pause for worker handoff, and dual-notify
SSH exits to attach-home owners in non-worker mode.
* fix(terminal): fan out exits for mosh/telnet/et attach owners
Use shared fanout for in-process protocol exits so attach-home and
display renderers both receive netcatty:exit under non-worker mode.
* fix(terminal): restore attach only onto main app windows
Avoid routing silent-session output to settings/prewarm windows when the
original home renderer is gone; fall back only to registered main windows.
* fix(terminal): harden silent session popup handoff
* fix(terminal): close observed popup with session
* fix(terminal): keep observe popup from reconnecting
* fix(terminal): preserve cleared observe snapshots
* fix(terminal): route transfer prompts to observer
* fix(terminal): keep context after observe restore
Subscribe to mosh ready before startMoshSession and drain a ready that
fires during the await after attach. Default moshSessionReadyListeners
in createPreloadApi so lightweight test contexts do not throw on close.
Codex review P2s:
- Dismiss the connection overlay on first handshake output so password/OTP
prompts remain reachable; only defer startup commands and connect/pending
scripts until mosh-client ready.
- Dispose the ready listener via disposeExitRef and closeSession so cancel
does not leak preload callbacks when exit is suppressed.
Mosh connects through an ephemeral SSH handshake PTY before swapping to
mosh-client. Marking connected and firing startup commands too early
sent snippet/script input into that handshake PTY, so run-on-connect
scripts and host startup commands never reached the real shell (#2199).
Tag handshake output with moshHandshake meta, emit mosh ready after the
client swap, and defer connected status + scheduleStartupCommand until
then.
Agents could list vault hosts and run commands on open sessions, but could not
open a host themselves. Add vault.host.open (MCP: host_open) that opens a
terminal tab via the vault agent bridge, merges the new session into MCP scope,
and documents the flow in the Catty system prompt.
Also redesign External MCP client configuration into segmented tabs with
shared copyable code blocks so setup matches the settings design system.
Lets Windows users (and others) route Google Drive / OneDrive / GitHub sync and AI provider traffic through system or custom proxies without touching SSH ProxyJump settings.
Co-authored-by: Cursor <cursoragent@cursor.com>
Expose the existing catalog MCP as a Settings-managed local bridge with
discovery lifecycle, one-click client setup, and reserved external scope
so third-party agents can use Netcatty without a sidebar chat session.
Co-authored-by: Cursor <cursoragent@cursor.com>
Local Terminal used a per-session hostId, so autocomplete history never
accumulated, and the store never imported ~/.zsh_history. Stabilize the
hostId and seed from local histfiles so prefix suggestions match Ghostty.
Closes#2037
Co-authored-by: Cursor <cursoragent@cursor.com>
* Add telnet URL deep link support
* Fix telnet deep link review issues
* Keep ssh deep links independent from telnet registration
* Address Codex telnet deep link feedback
* Support JumpServer jms:// client launch links
Register Netcatty as an optional jms:// protocol handler (opt-in,
default off to avoid conflicting with the official JumpServer client).
SSH/SFTP connection payloads decode to an ephemeral host that connects
to the JumpServer gateway with the one-time connection token, without
saving anything to the vault.
Fixes#1958
* Mark jms deep link hosts as ephemeral for session restore exclusion
* Open the SFTP side panel for JumpServer sftp launch links
jms:// payloads with protocol "sftp" previously landed in a plain
shell. Mark the ephemeral host with an autoOpenSftpPanel hint that the
session factory forwards as autoOpenSidePanel, and let TerminalLayer
open the SFTP side panel for that session once it connects.
* Support JumpServer telnet deep links
* Keep JumpServer telnet links on SSH gateway
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(zmodem): keep transfer listeners across same-session reconnects
The preload netcatty:exit handler dropped the per-session zmodem
listener sets, but auth-failure retries and auto-reconnects reuse the
same sessionId without remounting the terminal, so useZmodemTransfer
never re-subscribed and rz/sz progress + overwrite dialogs silently
stopped appearing (#1955). Move listener cleanup to explicit
closeSession and prune empty sets on subscriber dispose instead.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(zmodem): gate event delivery instead of dropping listeners on close
Codex review caught that reconnects also call closeSession with the
terminal still mounted (startReconnect -> cleanupSession), so clearing
listener maps there reintroduced the bug for manual/auto reconnects.
Keep listener sets owned by renderer subscribers and gate zmodem event
delivery on closedTerminalDataSessions, which is cleared when a session
restarts with the same id.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* feat(scripts): add terminal script automation, recording, and side panel
Introduce nct script runtime in the main process with terminal-side recording,
execution overlay, Monaco editor, connect-script queues, and scripts side panel
integration. Fix recording to wire scriptRecorderRef into xterm, use waitForPrompt
for root/user shells, and save recorded scripts through the global editor dialog.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): address Bugbot review findings for recording and side panel
Refresh script run state in side panel memo, guard toolbar recording against
multi-session conflicts, reset connect scripts on reconnect, resolve focused
session via getActiveTerminalSessionId, and avoid wiping host edit form when
snippets list updates.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): prevent pending script re-run and improve workspace run feedback
Track one-shot pendingScript execution separately from onConnect queue so
reconnects do not replay Run-now scripts. Fall back to focused session when
running on all tabs outside a workspace, and toast when every tab is still
connecting.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): consume connect-script window once and filter serial hosts
Mark the onConnect script evaluation as consumed even when the queue is
empty so later snippet/host edits do not rerun automation mid-session.
Restore serial-host filtering in SelectHostPanel confirm handler.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): grace period before giving up on connect-script queue
Only mark onConnect automation as consumed after scripts run or a short
post-connect grace window expires, so late-loading snippets still trigger
while mid-session Vault edits do not.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): gate connect-script consumption on vault hydration
Replace the grace timer with vault-init and unresolved host script binding
checks so late-loading snippets still run onConnect automation while
mid-session edits stay suppressed. Clear pending script run state on
disconnect so reconnect retries workspace pending scripts.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): honor run targets and retry failed connect automation
Route QuickScriptEditorDialog Run through onRunSnippet for multi-host
workspaces. Defer connect/pending script completion markers until each
script succeeds and retry the queue after failures.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): stabilize pending runs and global connect queue sync
Keep pending script run state across reconnects, run onConnect scripts
before one-shot workspace pending scripts, and strip per-host queue entries
when an onConnect script targets all hosts.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): defer host queue snippet sync and guard connect runs
Persist snippet target links only when the host panel is saved, block
duplicate connect-script scheduling while a batch is running, and require
runnable hosts before showing Run in the snippets editor footer.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): retry connect failures and surface output-trigger errors
Use a retry tick in connect-script effect deps, toast automation failures
from output triggers, and require runnable hosts before QuickScript Run.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): track id-less pending runs and re-arm output triggers
Remember anonymous pendingScript objects after first run and allow
onOutput triggers to fire again when new terminal output arrives.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): unblock paused connect runs and pass session meta
Resolve waitForScriptRun on pause, run workspace scripts per session
with hostname context, defer output-trigger arming until runs start, and
add noRunnableHosts i18n for QuickScript Run.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): serialize output triggers and defer empty connect finalize
Fire at most one onOutput trigger per scan while a run is active, and
only finalize an empty connect queue after vault snippets are loaded.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): guard output launch race and script run waits
Block overlapping onOutput launches, timeout stuck waitForScriptRun
promises, and disable vault Run when no connectable targets exist.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): match output triggers on new chunks only
Scan onOutput patterns against recent terminal output instead of buffer
length dedupe, and restore overflow-visible on SelectHostPanel new-host flow.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): await sequential workspace runs and output launch
Wait for each tab script to finish in sequential workspace mode, and hold
output-trigger launch guard until the session run becomes active.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): wait through pause and hold output trigger until done
Keep connect and sequential workspace queues blocked until scripts
complete or fail, and retain output-trigger guard until the launched run
finishes.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): harden output trigger wait helpers
Add explicit timeouts to output-trigger wait helpers and stop rescanning
the buffer after script completion to avoid sticky-match rerun loops.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): allow empty connect queue and match output in new chunks
Treat an empty connectScriptIds array as an explicit cleared queue instead
of re-migrating from snippet targets, and only fire onOutput triggers when
the latest terminal output contains the pattern.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): require fresh output overlap for onOutput triggers
Only fire output-matched scripts when the regex match extends into the
latest terminal chunk, preventing reruns from stale buffer text.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): promote manual scripts added to host connect queue
Diff connect queue changes from raw connectScriptIds so saving a host
updates manual scripts to onConnect when they are newly queued.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): dedupe output triggers by match position
Track the buffer end offset of each output trigger match and ignore
stale re-scans, with a longer wait for run registration before retry.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): record output trigger matches only after run starts
Propagate automation launch failures to output triggers and commit match
dedupe only once the session run is registered as active.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): address Codex review on wait cursor and sensitive codegen
Track scan offset so waitFor/waitForAny only match output after the previous wait, and emit sendLine after sensitive prompt in recorded scripts.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(scripts): harden onOutput triggers against PTY echo and local input
Filter server output before pattern matching so onOutput fires only after
Enter on real stdout, not on keystroke/paste echo, OSC/SGR sequences, or
alternate-screen apps. Add dev diagnostics and scope triggers to the active
session when no explicit host targets are configured.
Co-authored-by: Cursor <cursoragent@cursor.com>
* chore(scripts): remove onOutput trigger debug logging
Drop temporary diagnostics module and console traces now that PTY echo
filtering is verified; keep the production trigger pipeline unchanged.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Tighten renderer output back-pressure (128KB/32KB watermarks), account
coalescer and write-queue backlog, drain output on user keystrokes, and
add main-process IPC ACK flow control so SSH floods cannot starve Ctrl+C
and other keyboard input.
Closes#1711
Let users pick icon styles in Appearance settings with live Dock/window updates, dev public asset resolution, and cross-window sync.
Co-authored-by: Cursor <cursoragent@cursor.com>
Route global hotkey/tray show paths through restoreWindowInputFocus, recover renderer focus on visibility/show, dismiss transient overlays before native hide, and cancel deferred focus callbacks on hide.
Closes#1722