Commit Graph
2678 Commits
Author SHA1 Message Date
shixu 2e9c021e68 Address terminal encoding review feedback 2026-06-29 10:49:19 +08:00
shixu b7491fd05a Scope terminal encoding memory to host 2026-06-29 10:49:19 +08:00
shixu 003f1e1cb9 Remember terminal encoding preference 2026-06-29 10:49:19 +08:00
陈大猫 a50be64266 Merge pull request #1787 from binaricat/fix/vite-outdated-optimize-dep
Fix dev 504 Outdated Optimize Dep
2026-06-29 10:16:21 +08:00
bincxzandCursor 9a81b11317 Use cross-platform Node script for clean:vite on Windows.
Replace rm -rf with fs.rmSync so dev:clean works under npm on Windows.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-29 10:10:09 +08:00
陈大猫 2f22765133 Merge pull request #1777 from LaiYueJi/i18n/add-zh-tw
feat(i18n): add Traditional Chinese (zh-TW) locale
2026-06-29 10:09:00 +08:00
bincxzandCursor 98f260b047 Fix dev 504 Outdated Optimize Dep with cache clean scripts and auto reload.
Add clean:vite/dev:clean npm scripts and reload the renderer when Vite
returns 504 for stale pre-bundled deps after pull or npm install.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-29 10:05:46 +08:00
LaiYueJi 42211fb432 feat(i18n): add Traditional Chinese (zh-TW) locale
Add Traditional Chinese (Taiwan) translations, derived from zh-CN and
adapted to Taiwan terminology and phrasing (e.g. 軟體/網路/設定/工作階段/
檔案/連接埠/伺服器). Register zh-TW in messages.ts and append it to
SUPPORTED_UI_LOCALES so it appears in the language selector.
2026-06-29 07:18:00 +08:00
陈大猫 52974c5e77 Merge pull request #1778 from binaricat/fix/wait-for-script-run-tdz
Fix waitForScriptRun TDZ crash and remove connect script auto-retry
2026-06-29 02:47:32 +08:00
bincxzandCursor 41f4dd0781 Fix connect-script catch path without falsely marking batch complete.
Keep in-flight until optional pending script run finishes; do not mark
unstarted connect scripts as completed on batch failure.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-29 02:47:23 +08:00
bincxzandCursor 1d18ca9761 Address bugbot findings for script wait and connect lifecycle.
Use tail-fresh matching instead of script-start baseline so waitForPrompt
still works while stale scrollback no longer satisfies waitFor (#1776).
Defer subscribeScriptRuns notifications, pre-check terminal runs, and
run pending connect scripts when an earlier connect batch fails without retry.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-29 02:45:02 +08:00
bincxzandCursor b310ec7a25 Fix waitFor matching stale terminal scrollback at script start.
Mark the session output scan baseline after syncing the screen snapshot
so waitFor/waitForAny only match output that arrives after the run begins.
Fixes interactive prompts firing sendLine before the server asks (#1776).

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-29 02:41:52 +08:00
bincxzandCursor 85524afc0d Fix waitForScriptRun TDZ crash and remove connect script auto-retry.
subscribeScriptRuns invokes listeners synchronously; finish() must not call
unsubscribe before assignment when the run is already terminal. Drop the
connectScriptRetryTick loop so a post-run error no longer re-queues scripts.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-29 02:39:08 +08:00
陈大猫 6b85fbbafc Merge pull request #1775 from binaricat/cursor/snippets-header-actions-fade
Add fade gradient to scripts header when side panel is open
2026-06-29 01:56:10 +08:00
bincxzandCursor 12971e1ca4 Add fade gradient to scripts header actions when side panel is open.
Softens the scroll edge before the fixed view controls so toolbar buttons do not look abruptly cut off in split layout.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-29 01:55:59 +08:00
陈大猫 997bd2b3d7 Merge pull request #1774 from binaricat/cursor/fix-scripts-header-after-panel-close
Fix scripts header buttons after closing side panel
2026-06-29 01:54:27 +08:00
bincxzandCursor db4cff0309 Fix scripts header actions staying hidden after closing the side panel.
Keep toolbar buttons visible with a scrollable action row instead of collapsing them to zero width when the edit panel opens.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-29 01:54:11 +08:00
陈大猫 8709a5e354 Merge pull request #1773 from binaricat/cursor/vault-host-panel-and-snippet-tooltip
Polish vault UI: resizable host panels, snippet tooltips, known hosts actions
2026-06-29 01:48:59 +08:00
bincxzandCursor e9587de1ea Align known hosts card actions with vault host list hover buttons.
Move convert/delete controls to the item trailing edge with standard ghost icon buttons instead of tiny corner overlays.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-29 01:48:43 +08:00
bincxzandCursor bd12dc663e Polish vault host-details and snippet UI.
Truncate long snippet command tooltips, add drag-resize for inline host/group detail panels, and compact appearance override reset controls.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-29 01:41:03 +08:00
陈大猫 24667b7163 Merge pull request #1772 from binaricat/fix/ci-lockfile-anthropic-sdk
fix(ci): restore @anthropic-ai/sdk entry in package-lock.json
2026-06-29 00:58:31 +08:00
bincxzandCursor 108cea1e5d fix(ci): restore @anthropic-ai/sdk entry in package-lock.json
PR #1763 accidentally dropped the resolved @anthropic-ai/sdk@0.106.0 lock
entry, causing npm ci to fail on npm 10 (Node 22 CI) with EUSAGE.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-29 00:58:04 +08:00
陈大猫andCursor b2e08e3963 feat(vault-agent): expose snippet/script CRUD and chat artifact cards (#1771)
Expose snippets and automation scripts to Catty, MCP, and CLI with full run lifecycle, vault bridge CRUD, and clickable tool-result cards in the chat message list.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-29 00:40:54 +08:00
陈大猫andCursor b1f199c4d7 fix(sync): show sync dates and pending-only green dot (#1765) (#1770)
Add yyyymmdd hhmm timestamps to cloud sync history and only show the green status dot when local changes are still pending upload.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-29 00:12:03 +08:00
陈大猫andCursor ee4b09059e Fix autocomplete popup boundary clamp. (#1769)
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-28 23:59:24 +08:00
陈大猫andCursor 6b9b71ac8a feat(scripts): terminal script automation, recording, and side panel (#1763)
* feat(scripts): add terminal script automation, recording, and side panel

Introduce nct script runtime in the main process with terminal-side recording,
execution overlay, Monaco editor, connect-script queues, and scripts side panel
integration. Fix recording to wire scriptRecorderRef into xterm, use waitForPrompt
for root/user shells, and save recorded scripts through the global editor dialog.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(scripts): address Bugbot review findings for recording and side panel

Refresh script run state in side panel memo, guard toolbar recording against
multi-session conflicts, reset connect scripts on reconnect, resolve focused
session via getActiveTerminalSessionId, and avoid wiping host edit form when
snippets list updates.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(scripts): prevent pending script re-run and improve workspace run feedback

Track one-shot pendingScript execution separately from onConnect queue so
reconnects do not replay Run-now scripts. Fall back to focused session when
running on all tabs outside a workspace, and toast when every tab is still
connecting.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(scripts): consume connect-script window once and filter serial hosts

Mark the onConnect script evaluation as consumed even when the queue is
empty so later snippet/host edits do not rerun automation mid-session.
Restore serial-host filtering in SelectHostPanel confirm handler.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(scripts): grace period before giving up on connect-script queue

Only mark onConnect automation as consumed after scripts run or a short
post-connect grace window expires, so late-loading snippets still trigger
while mid-session Vault edits do not.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(scripts): gate connect-script consumption on vault hydration

Replace the grace timer with vault-init and unresolved host script binding
checks so late-loading snippets still run onConnect automation while
mid-session edits stay suppressed. Clear pending script run state on
disconnect so reconnect retries workspace pending scripts.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(scripts): honor run targets and retry failed connect automation

Route QuickScriptEditorDialog Run through onRunSnippet for multi-host
workspaces. Defer connect/pending script completion markers until each
script succeeds and retry the queue after failures.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(scripts): stabilize pending runs and global connect queue sync

Keep pending script run state across reconnects, run onConnect scripts
before one-shot workspace pending scripts, and strip per-host queue entries
when an onConnect script targets all hosts.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(scripts): defer host queue snippet sync and guard connect runs

Persist snippet target links only when the host panel is saved, block
duplicate connect-script scheduling while a batch is running, and require
runnable hosts before showing Run in the snippets editor footer.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(scripts): retry connect failures and surface output-trigger errors

Use a retry tick in connect-script effect deps, toast automation failures
from output triggers, and require runnable hosts before QuickScript Run.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(scripts): track id-less pending runs and re-arm output triggers

Remember anonymous pendingScript objects after first run and allow
onOutput triggers to fire again when new terminal output arrives.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(scripts): unblock paused connect runs and pass session meta

Resolve waitForScriptRun on pause, run workspace scripts per session
with hostname context, defer output-trigger arming until runs start, and
add noRunnableHosts i18n for QuickScript Run.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(scripts): serialize output triggers and defer empty connect finalize

Fire at most one onOutput trigger per scan while a run is active, and
only finalize an empty connect queue after vault snippets are loaded.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(scripts): guard output launch race and script run waits

Block overlapping onOutput launches, timeout stuck waitForScriptRun
promises, and disable vault Run when no connectable targets exist.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(scripts): match output triggers on new chunks only

Scan onOutput patterns against recent terminal output instead of buffer
length dedupe, and restore overflow-visible on SelectHostPanel new-host flow.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(scripts): await sequential workspace runs and output launch

Wait for each tab script to finish in sequential workspace mode, and hold
output-trigger launch guard until the session run becomes active.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(scripts): wait through pause and hold output trigger until done

Keep connect and sequential workspace queues blocked until scripts
complete or fail, and retain output-trigger guard until the launched run
finishes.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(scripts): harden output trigger wait helpers

Add explicit timeouts to output-trigger wait helpers and stop rescanning
the buffer after script completion to avoid sticky-match rerun loops.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(scripts): allow empty connect queue and match output in new chunks

Treat an empty connectScriptIds array as an explicit cleared queue instead
of re-migrating from snippet targets, and only fire onOutput triggers when
the latest terminal output contains the pattern.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(scripts): require fresh output overlap for onOutput triggers

Only fire output-matched scripts when the regex match extends into the
latest terminal chunk, preventing reruns from stale buffer text.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(scripts): promote manual scripts added to host connect queue

Diff connect queue changes from raw connectScriptIds so saving a host
updates manual scripts to onConnect when they are newly queued.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(scripts): dedupe output triggers by match position

Track the buffer end offset of each output trigger match and ignore
stale re-scans, with a longer wait for run registration before retry.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(scripts): record output trigger matches only after run starts

Propagate automation launch failures to output triggers and commit match
dedupe only once the session run is registered as active.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(scripts): address Codex review on wait cursor and sensitive codegen

Track scan offset so waitFor/waitForAny only match output after the previous wait, and emit sendLine after sensitive prompt in recorded scripts.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(scripts): harden onOutput triggers against PTY echo and local input

Filter server output before pattern matching so onOutput fires only after
Enter on real stdout, not on keystroke/paste echo, OSC/SGR sequences, or
alternate-screen apps. Add dev diagnostics and scope triggers to the active
session when no explicit host targets are configured.

Co-authored-by: Cursor <cursoragent@cursor.com>

* chore(scripts): remove onOutput trigger debug logging

Drop temporary diagnostics module and console traces now that PTY echo
filtering is verified; keep the production trigger pipeline unchanged.

Co-authored-by: Cursor <cursoragent@cursor.com>

---------

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-28 23:48:12 +08:00
陈大猫 9d98853091 Merge pull request #1762 from binaricat/fix/issue-1761-unfocused-terminal-repaint
fix(terminal): keep tmux updating when window loses focus (#1761)
2026-06-28 13:11:42 +08:00
bincxzandCursor 7f90896dbc fix(terminal): flush write coalescer when window loses focus
Bypass the RAF-bound output coalescer for visible unfocused panes so flow control does not pause the PTY before unfocused repaints can run.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-28 13:06:40 +08:00
bincxzandCursor 8c4575c0d1 fix(terminal): skip unfocused repaint for hidden panes
Only run the synchronous unfocused repaint path when the pane is visible, avoiding wasted row rendering for background tabs while the window is unfocused.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-28 13:02:21 +08:00
bincxzandCursor 232cbb9b67 fix(terminal): keep tmux output flowing when the window loses focus
Force synchronous xterm repaints while the app stays visible but unfocused so Windows Chromium does not stall write callbacks, output flow control, and tmux redraws until refocus.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-28 12:57:31 +08:00
陈大猫 d1ef4c4e33 Merge pull request #1759 from binaricat/codex/fix-ctrl-c-htop-exit
[codex] Fix Ctrl+C full-screen terminal cleanup
v1.1.47
2026-06-28 06:30:27 +08:00
bincxzandCursor ff298476f1 Fix interrupt priority regressions found in Bugbot review.
Keep write-queue and flow ack flushing when stale display drain is disabled for non-SSH protocols, and preserve terminal restore controls on split ^C caret echoes.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-28 06:30:14 +08:00
bincxz 59ea442f5c Fix Ctrl+C full-screen terminal cleanup 2026-06-28 06:10:57 +08:00
陈大猫 124bab4761 Merge pull request #1758 from binaricat/fix/terminal-tui-tab-switch-resize
Fix TUI layout after switching terminal tabs
2026-06-28 03:50:57 +08:00
bincxzandCursor 526187f635 Defer PTY sync until after RAF terminal refit completes.
Run finishLayoutRecoveryAfterFit so SIGWINCH uses post-refit cols/rows instead of stale dimensions.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-28 03:49:26 +08:00
bincxzandCursor 99095e2f43 Fix TUI layout after switching back to a terminal tab.
Force refit and PTY resize when a hidden pane becomes visible again so full-screen TUIs receive SIGWINCH instead of staying at a stale default size.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-28 03:45:55 +08:00
陈大猫 8db0b40d74 Merge pull request #1757 from binaricat/fix/terminal-theme-switch-and-tab-perf
Fix terminal theme mode switching and workspace tab switch perf
2026-06-28 03:29:04 +08:00
bincxzandCursor 71687491f0 Fix terminal theme mode switching and speed up workspace tab changes.
Keep connection dialog and chrome surfaces in sync when toggling follow-app vs manual themes, and isolate side-panel live state per tab so switching workspace tabs no longer re-renders every mounted panel.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-28 03:28:50 +08:00
陈大猫 c998b69bd8 Merge pull request #1756 from binaricat/fix/restored-session-sidebar-chrome
Fix restored session sidebar chrome for host tree and side panel
2026-06-28 02:54:48 +08:00
bincxzandCursor d207a1fb44 Align workspace fallback session selection for theme and host highlight.
Share tree-order fallback between resolveActiveChromeTheme and resolveWorkTabActiveHostId so stale focusedSessionId after restore keeps sidebar theme and highlight in sync.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-28 02:52:19 +08:00
bincxzandCursor 19844e2831 Fix restored session sidebar chrome for host tree and side panel tabs.
Align AppHostTreeLayer with resolveActiveChromeTheme, use inline terminal colors for side panel tab bars/borders, and fall back workspace active host when focused session is stale.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-28 02:48:51 +08:00
陈大猫 13061fda9a Merge pull request #1755 from binaricat/feat/terminal-theme-runtime
Unify terminal theme updates through ThemeRuntime
2026-06-28 02:38:29 +08:00
bincxzandCursor 5f403232ab Fix host tree toolbar fade to use themed background color.
Drive the action-row gradient from theme.termBg instead of falling back to
the app background, and satisfy useMemo exhaustive-deps for preview theme.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-28 02:37:49 +08:00
bincxzandCursor 6a9ed0fc9d Re-render host tree sidebar when resolved preview theme changes.
Include theme fingerprint in the sidebar memo comparator so inline host-tree
colors update when terminal themes change without host list churn.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-28 02:29:41 +08:00
bincxzandCursor 12e1ec7dcd Fix host tree theme drift when leaving terminal work tabs.
Derive sidebar row colors from resolvedPreviewTheme again and limit manual
chrome var injection to terminal-layer surfaces only.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-28 02:27:20 +08:00
bincxzandCursor efa223d9db Re-sync xterm theme when a hidden pane becomes visible again.
Include pane visibility in the theme layout effect dependencies so pending
scheduler updates are cancelled and the current theme applies immediately.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-28 02:23:22 +08:00
bincxzandCursor f726c6b4f6 Fix ThemeRuntime review findings for intent scope and theme sync.
Keep follow-app intent until the side panel closes, scope manual picks to
the focused host, and cancel stale hidden-pane scheduler updates when a
visible terminal applies its theme synchronously.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-28 02:20:06 +08:00
bincxzandCursor eee7a8846c Unify terminal theme updates through ThemeRuntime for faster, synced UI.
Replace parallel preview/pending follow-app pipelines with a single runtime
that drives xterm, side panel, host tree, and top tabs together in both
follow-app and manual modes.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-06-28 02:17:06 +08:00
陈大猫 b09e468f04 Merge pull request #1752 from binaricat/codex/app-resume-webgl-recovery
[codex] Recover terminal renderer on app resume
2026-06-28 00:47:05 +08:00
bincxz 686543b90a Recover terminal renderer on app resume 2026-06-28 00:38:42 +08:00