* fix: harden sync overwrite recovery
* refactor: separate backup retention settings
* refactor: align backup retention controls
* refactor: simplify backup retention card
* fix: address PR #720 deep-review findings
- Close the cross-window restore race by holding a time-bounded barrier
in localStorage during every destructive apply; useAutoSync skips
pushes while it's set, preventing a pre-restore snapshot from
clobbering just-restored cloud data.
- Round-trip startup three-way merges so merged-in local additions
actually reach the cloud instead of living only on the device that
ran the merge until the next edit.
- Upgrade sync signatures from a 64-char ciphertext prefix to full
SHA-256 (v3), closing the tail-mutation replay weakness.
- Harden the vault-backup IPC: payload size cap, enum-validated reason,
sanitized version strings, strict maxCount, concurrent-call mutex,
monotonic createdAt to avoid same-ms ordering ties.
- Extract the anchor-change decision into a pure module with unit tests
covering no-anchor, resource-id drift, and signature mismatch paths.
- Capture the protective backup from the pre-apply closure snapshot so
it reflects what's being replaced rather than what was imported.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: address PR #720 follow-up review findings
Make protective backup abort-on-failure (was best-effort console.error),
preserve nested syncedAt in fingerprint, use UTF-8 byte length for size
guard, throw on conflict-inspect failure so stale uploads can't leak
through, treat unreadable remote as changed, canonical-JSON signature
meta, and hold the version stamp on transient backup failures so the
retry path still fires.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: address second-pass review findings on PR #720
- Hold version-change stamp when payload is non-meaningful (covers the
startup vault-rehydrate race where a transient empty snapshot would
permanently skip the upgrade backup).
- readBackupRecord stat-checks before readFile so an oversized file in
the backup dir cannot OOM the renderer on enumeration.
- Reject maxBackups input outside 1..100 instead of silently clamping
(matches the i18n error copy and the main-process sanitizer bound).
- Wrap USE_LOCAL conflict-resolution push in withRestoreBarrier so a
concurrent auto-sync in another window cannot interleave.
- sha256Hex throws SyncSignatureUnavailableError on missing WebCrypto
subtle; createSyncedFileSignature returns null, forcing the
unreadable-remote → three-way-merge path instead of a weak
length-only pseudo-signature.
- Document that array order in normalizePayloadForHash is an invariant
enforced by producers, not the hash function.
- Drop three-way-merge completion logs from console.log to console.info.
- Comment the implicit restore → store-listener refresh chain so
future refactors don't silently break the UI reload path.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: address third-pass review findings on PR #720
Resolves I-3 through I-8 and related cleanup items identified in the
deep review. Highlights:
- replace setTimeout(0) post-merge round-trip with a direct
syncAllProviders call using the already-computed merged payload,
removing the React-commit race
- resolve the empty-vault confirmation promise on unmount so a
mid-dialog window teardown doesn't leak the resolver
- retry the version-change backup as hosts/keys hydrate, instead of
latching on the first (possibly empty) snapshot
- heartbeat-refresh the cross-window restore barrier so long applies
cannot expose a post-60s window to concurrent auto-sync
- add a diagnostic warning when connected providers hold divergent
bases (multi-account configurations)
- surface a user-visible "Sync paused" toast when startup inspect
fails, replacing the previous silent gate-open
- tie-break backup list sort by id when createdAt collides
- extract applyProtectedSyncPayload so the main and settings windows
cannot drift on restore-barrier / protective-backup handling
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: address deep-review findings on PR #720
Deep re-review surfaced six Important issues that survived the prior
four review rounds. All are hardened here:
- I1: fsync the protective backup file AND its directory before the
rename completes, so a system crash between backup creation and the
restore it guards cannot leave a torn/zero-length safety net.
- I3: persist an apply-in-progress sentinel across the non-atomic
localStorage writes in applySyncPayload. A crash mid-apply now
surfaces on the next startup (toast + refuse auto-push) instead of
silently pushing the half-applied state over an intact cloud copy.
- I2: only open the auto-sync gate (remoteCheckDoneRef) when the
startup inspect validated cleanly. Add a bounded exponential-backoff
retry so a transient inspect failure self-heals instead of wedging
auto-sync until restart.
- I5: save the sync base BEFORE advancing the per-provider anchor
inside uploadToProvider. A renderer crash between the two writes
now degrades to "stale anchor forces re-inspect on next run," which
re-merges against the fresh base — eliminating the silent
base-drift window where a 3rd-device race could misclassify
entries.
- I6: main process broadcasts a vaultBackups:changed IPC event on
every mutation; useLocalVaultBackups subscribes so protective
backups created from the main window show up in the Settings
backup list without manual refresh.
- I4: update PR description + code comment to match the actual
(safer) design: auto-sync gate opens on vault init, with
hasMeaningfulSyncData + restore barrier preventing empty-push; the
version-change backup is best-effort and retries as data hydrates.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: serialize startup checkRemoteVersion and stabilize its deps
Re-review flagged that checkRemoteVersion's useCallback depended on
`config` — a fresh object literal from App.tsx on every render — so
the retry effect restarted with attempt=0 on every vault edit and
could spawn overlapping in-flight inspect+apply runs. Two concurrent
commitRemoteInspection + onApplyPayload calls could race on the
apply-in-progress sentinel around interleaved writes.
Route `buildPayload`, `config.onApplyPayload`, and `config.startupReady`
through refs so checkRemoteVersion's identity no longer churns with
unrelated App state. Add an in-flight guard that returns early when a
previous invocation is still awaiting the network, closing the
same-window re-entry gap that withRestoreBarrier intentionally doesn't
cover.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: release in-flight lock on no-connected-provider early return
Third-pass review caught that `checkRemoteInFlightRef` was acquired
before the `!connectedProvider` check, so that early return leaked
the lock and every subsequent retry-timer tick silently no-op'd.
Move the acquisition past the early return so the only path that
takes the lock reaches the finally-release.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Codex agent auth must be determined entirely by ~/.codex/auth.json or
~/.codex/config.toml. Before this change, if the user configured any
OpenAI-compatible API provider in netcatty settings (for Catty agent use),
useAIChatStreaming would silently hand that provider's apiKey to the Codex
agent too, causing aiBridge to spawn codex-acp with authMethodId
"codex-api-key" and completely override the user's ChatGPT login.
The regression was introduced in PR #702 (v1.0.89) when findManagedAgent
Provider started matching generic "custom" providers for Codex. Users who
logged into Codex via ChatGPT and also had a netcatty-configured custom
provider saw the UI flip to "API mode" on refresh and their ChatGPT
session get ignored.
Remove the codex branch from the agentProviderId resolver and from
findManagedAgentProvider itself. Also drop the now-meaningless
hasCompatibleProvider hint on the Codex settings card and its i18n copy.
Claude agent behavior is unchanged.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Extract fail-loud check to shared getCodexCustomConfigPreflightError so
the list-models handler (aiBridge.cjs:2149) enforces the same up-front
error as the stream handler. Previously a user whose config.toml
env_key was unexported would get the targeted message on chat send but
a generic "Missing env var" from model-list probes (once the probe was
rewired for Codex in a future change).
- Wire Settings "Refresh Status" to also invalidate the shell-env cache.
New invalidateShellEnvCache() helper in shellUtils; aiCodexGetIntegration
now accepts an optional { refreshShellEnv } flag; the button passes it
so a user who just exported OPENROUTER_API_KEY in their rc file can
click Refresh instead of having to restart netcatty.
- Declare authHash in CodexCustomProviderConfig (types.ts + global.d.ts)
so renderer TS actually sees the field instead of needing a cast.
- DRY the 360 magic number in ChatInput: extract
MODEL_PICKER_MAX_WIDTH, use it in both the className max-width and the
left-clamp math so the two can't drift.
- Move codexCustomConfigResolved useState declaration next to its
companion codexConfigModel, above the effect that invokes its setter,
and drop the duplicate declaration further down. Pure code-organization
cleanup but removes a use-before-declaration nit.
No functional changes beyond the fail-loud parity and the refresh-shell-env
path. ACP behavior when authMethodId is omitted still requires a
real-world OpenRouter config.toml validation, which the user is running.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Two issues the user flagged with the previous round:
1. Probing codex-acp for available models returned the stock ChatGPT
catalog (GPT 5.4, Codex 5.x, o3, o4-mini) regardless of the active
provider. For a user with a custom model_provider in
~/.codex/config.toml (OpenRouter + Qwen), those IDs are meaningless
on their endpoint. Roll back the managed-Codex probe hook and go
back to static CODEX_MODEL_PRESETS for the stock / ChatGPT path.
2. The fixed w-[300px] popover left empty space on the right whenever
the longest row was narrower than 300px.
Instead of the probe, teach readCodexCustomProviderConfig to also
return the top-level `model` from config.toml and expose it on the
integration response. In AIChatSidePanel, call aiCodexGetIntegration
when Codex is the active agent and, if customConfig.model is present,
override agentModelPresets with a single-entry list pinned to that
model. Otherwise fall back to the static presets as before — so
ChatGPT users see GPT 5.x / Codex 5.x etc. exactly like before, while
custom-config users see just the model their provider is actually
pinned to.
Popover switches from fixed width to `w-max min-w-[160px] max-w-[360px]`
so it hugs content (great for short single-model lists) while still
capping very long rows.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The first pass required both a custom model_provider in ~/.codex/config.toml
AND the referenced env_key to already be present in the shell environment.
If a user had the config file set up but hadn't (yet) exported the key in
their shell, detection returned null and the UI fell back to "Not
connected" + "Connect ChatGPT" — which is the exact flow they were trying
to avoid.
The config.toml is a strong enough signal of intent on its own. Keep the
integration in the connected_custom_config state regardless of env_key
availability, but expose envKeyPresent on the response so the UI can
explicitly warn "Warning: $MY_KEY is not set in your shell — export it".
Status label and color also flip to amber ("Custom config detected — env
var missing") so the state is easy to spot without dropping back to the
login prompt.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Users who hand-configure ~/.codex/config.toml with a custom model_provider
and matching [model_providers.<name>] entry are fully functional from the
Codex CLI, but netcatty only looked at codex login status — which reports
on ~/.codex/auth.json alone — and would therefore push them into the
ChatGPT login flow even though the CLI works for them.
Add a minimal TOML parser for the narrow subset we need (top-level keys
plus [model_providers.<name>] string tables), and readCodexCustomProvider
Config() to detect a usable custom-provider setup: an active model_provider
that isn't the built-in openai preset, pointing at a provider entry whose
env_key is set in the shell env (or api_key is hardcoded).
Surface this as a new integration state "connected_custom_config", add a
customConfig summary on the IPC response, and tweak the Codex settings
card so it shows the custom-provider name, hides the Connect ChatGPT
button, and drops the stale "OpenAI-compatible provider" hint when this
path is active.
At Codex-ACP spawn time, introduce getCodexAuthOverride() so we only pass
authMethodId: "chatgpt" when we truly have no other option. When a
netcatty-managed API key is present we still use "codex-api-key"; when the
user has a custom config we omit authMethodId entirely so codex-acp
resolves auth from the shell env / config.toml itself. Fold the detected
custom config (provider name, base url, env key presence) into the
provider reuse fingerprint so edits to config.toml invalidate cached ACP
instances.
Fixes the Codex half of #677 for users who skip Settings → AI providers.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Adds a "Show SFTP tab" toggle in Settings → Appearance (under the
Vault section) that controls visibility of the standalone SFTP view
in the top tab bar. When disabled:
- The SFTP tab is removed from the top tab strip.
- The openSftp hotkey (Ctrl+Shift+O / ⌘⇧O) becomes a no-op.
- If the user is currently on the SFTP tab, the active tab auto-
switches to Vaults.
The in-session SFTP side panel (opened from the terminal toolbar) is
unaffected — that is the surface users keep when they hide the
top-level tab.
Setting persists via localStorage, syncs across windows, and is
included in the cloud SyncPayload alongside the existing Vault
visibility toggles (showRecentHosts,
showOnlyUngroupedHostsInRoot). Default: on.
Addresses the first ask in #690.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
ToggleRow is a locally-defined component in HostDetailsPanel and
GroupDetailsPanel — it is NOT exported or available in the terminal
settings tab. Using it caused a white-screen crash. Replaced with
the existing SettingRow + Toggle pattern that's already used
throughout the terminal settings tab.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When enabled (default for new users), the terminal theme automatically
switches to match the active app UI theme — so the terminal background
blends seamlessly with the app chrome, regardless of which UI theme
preset the user picks (Snow, Midnight, Forest, etc.).
## New terminal themes (14)
Each built-in UI theme preset now has a corresponding terminal theme
with an exactly matching background color:
Light: ui-snow, ui-pure-white, ui-ivory, ui-mist, ui-mint, ui-sand,
ui-lavender — ANSI palette based on netcatty-light with per-theme
cursor colors that complement the UI accent.
Dark: ui-pure-black, ui-midnight, ui-deep-blue, ui-vscode,
ui-graphite, ui-obsidian, ui-forest — ANSI palette based on
netcatty-dark with accent-matched cursors and selections.
## "Follow Application Theme" setting
- New toggle in Settings → Terminal → Theme section
- Default ON for new users, persisted in localStorage
- When ON: terminal theme auto-derived from the active UI theme via
a mapping table in domain/terminalAppearance.ts
- When OFF: manual theme selector shown (existing behavior)
- Switching the app between light/dark (or changing the UI theme
preset) instantly updates the terminal theme
## Files changed (9)
- terminalThemes.ts: +14 theme definitions
- terminalAppearance.ts: UI→terminal mapping table +
getTerminalThemeForUiTheme()
- useSettingsState.ts: followAppTerminalTheme state + persist +
currentTerminalTheme derivation
- storageKeys.ts: new storage key
- SettingsTerminalTab.tsx: toggle UI + conditional theme selector
- SettingsPage.tsx: pass new props
- App.tsx: destructure new state
- en.ts + zh-CN.ts: 2 new i18n keys
Closes#675
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
When selecting "Custom..." from the shell dropdown, opens a modal with:
- Full-width input field for shell executable path
- Path validation feedback (valid/not found/is directory)
- Quick-pick buttons for common shell paths
- Confirm/Cancel buttons
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Use the same styled Select component as other Settings dropdowns for
visual consistency. Removes the unstyled native <select> element.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat: support custom keywords and colors in global keyword highlighting (#590)
Add ability to create custom keyword highlight rules in global settings
(Settings > Terminal > Keyword Highlighting):
- Per-rule enable/disable toggle for both built-in and custom rules
- Add custom rules with label, regex pattern, and color picker
- Delete custom rules (built-in rules cannot be deleted)
- Pattern validation with error feedback
- Custom rules sync across devices via cloud sync
- i18n support (en, zh-CN)
Built-in categories (Error, Warning, OK, Info, Debug, URL/IP/MAC) are
preserved and cannot be deleted, only toggled and recolored.
Closes#590
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* refactor: use dialog modal for adding custom keyword highlight rules
Replace inline form with a proper modal dialog:
- Button opens dialog instead of showing inline inputs
- Dialog has label+color, regex pattern, and live preview
- Reset and Add buttons side by side in footer area
- Add common.add i18n key (en, zh-CN)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* ui: unify button styles in keyword highlight section
Both buttons now use ghost variant with equal flex-1 width for a
cleaner, balanced layout.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* ui: fix keyword highlight rule list alignment
- Add placeholder spacer (w-5) for built-in rules to match delete
button width on custom rules, keeping color pickers aligned
- Move regex pattern to second line for custom rules
- Use block+truncate for label and pattern text
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* ui: hide regex, show edit/delete icons after label for custom rules
- Remove regex pattern display from rule list
- Add pencil (edit) and trash (delete) icons after custom rule label,
visible on hover
- Edit opens the same dialog pre-filled with rule data
- Dialog supports both add and edit modes with appropriate titles/buttons
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* ui: remove toggle dots, simplify edit/delete to plain icons
- Remove the red enable/disable dot button from all rules
- Replace Button wrappers with plain Lucide icons for edit/delete
(no hover background, just cursor pointer)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: preserve multi-pattern rules on edit, keep disabled state on reset
- Editing a custom rule now preserves patterns beyond the first one
- Reset to default colors no longer force-enables disabled rules
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: replace all patterns on edit instead of preserving hidden ones
When editing a custom rule, save only the single user-visible pattern
rather than silently keeping extra patterns the user cannot see.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: preserve regex whitespace and multi-pattern rules on edit
- Stop trimming regex patterns on save (only trim for empty check)
- If pattern field unchanged during edit, preserve all original
patterns so changing just label/color doesn't drop extra regexes
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: preserve additional patterns when editing custom rule
When editing, replace only the first pattern (the one shown in the
dialog) and keep any additional patterns intact to prevent data loss
for multi-pattern rules from sync or import.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Immersive mode was already hardcoded to true with a no-op setter.
Clean up all dead code:
- Remove isImmersive param from useImmersiveMode hook
- Remove immersiveMode/setImmersiveMode from useSettingsState
- Remove toggle from SettingsPage and SettingsAppearanceTab
- Remove sync read/write of immersiveMode setting
- Remove i18n keys for the removed toggle
- Simplify App.tsx conditionals
Kept: useImmersiveMode hook (core logic), CSS classes (fade overlay),
sync type field (backward compat), storage key.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(models): add pinned and lastConnectedAt fields to Host
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* feat(i18n): add translations for pinned and recently connected sections
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* feat(vault): add pin toggle, lastConnectedAt tracking, and computed sections
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(vault): render Pinned and Recently Connected sections at root level
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(vault): add pin/unpin context menus and hover edit buttons in all views
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(vault): make breadcrumb a drop target for moving groups back to root
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* feat(settings): add toggle for showing recently connected hosts section
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix: resolve lint warnings for unused vars and unnecessary dependency
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: improve pin performance and add pop-in animation
- Use ref for hosts in callbacks to avoid stale closures and
unnecessary re-renders when hosts array changes
- Add pop-in spring animation on pinned host cards with staggered
delay for a satisfying visual effect
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: fix pop-in animation visibility and improve pin responsiveness
- Move @keyframes pop-in out of @layer base to global scope so inline
styles can reference it
- Add translateY to animation for a bouncier, more satisfying feel
- Use pinnedAnimKey to force card remount on pin changes so animation
replays each time
- Wrap onUpdateHosts in startTransition for non-blocking pin updates
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: only animate newly pinned card, increase section spacing
- Track lastPinnedId instead of global animKey so only the newly pinned
card gets the pop-in animation, not all existing pinned cards
- Clear animation state via onAnimationEnd for clean re-trigger
- Add mb-4 to Pinned and Recent sections for better visual separation
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(vault): show pin indicator icon on pinned host cards
Small semi-transparent pin icon in top-right corner of pinned host
cards in the Hosts section (grid view only).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* style: use solid amber/yellow pin indicator icon
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* style: tilt pin indicator icon 45 degrees
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* style: replace pin indicator with filled amber star on all pinned cards
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: move lastConnectedAt tracking to App-level handleConnectToHost
Previously updating lastConnectedAt in VaultView's handleHostConnect
which could be lost during tab switches. Now tracked at the App level
where all connections are handled, ensuring the timestamp persists
regardless of UI navigation state.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: address Codex review findings (P2 issues)
1. useStoredBoolean now syncs across same-window components via
CustomEvent dispatch, so Settings toggle immediately updates VaultView
2. lastConnectedAt updated after connectToHost succeeds, not before
3. Pinned and Recently Connected sections now respect active search
and tag filters
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: address second round Codex review findings
1. Track lastConnectedAt on actual 'connected' status instead of
session creation - handles via handleSessionStatusChange wrapper
2. Covers tray panel connections since all paths go through
updateSessionStatus
3. Pinned/Recent cards now honor multi-select mode with checkbox
UI instead of triggering connections
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: address third round Codex review findings
1. [P1] Use hostsRef in handleSessionStatusChange to avoid
overwriting concurrent host changes with stale snapshot
2. [P2] Exclude pinned/recent hosts from main host list at root
level to prevent duplicate cards on screen
3. [P2] Remove Pin action from tree view context menu since tree
view has no pinned ordering/indicator support
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: address fourth round Codex review findings
1. [P1] Remove leftover onToggleHostPinned references in HostTreeView
root-level component that were missed in previous cleanup
2. [P2] Add draggable + onDragStart to pinned/recent host cards so
drag-and-drop between groups still works
3. [P3] Fix grouped view header count to exclude hosts already shown
in pinned/recent sections
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: use functional state update for lastConnectedAt, dedupe pinned from recent
1. [P2] Add updateHostLastConnected using setHosts(prev => ...) functional
update pattern (same as updateHostDistro) to avoid overwriting concurrent
host changes when multiple sessions connect simultaneously
2. [P3] Exclude pinned hosts from Recently Connected section to prevent
duplicate cards between the two top sections
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: wire showRecentHosts into settings sync, clear pin on duplicate
1. [P2] Add showRecentHosts to SyncPayload settings so the preference
survives cloud sync and settings export/import
2. [P2] Clear pinned and lastConnectedAt on duplicated hosts so copies
don't inherit pin/recent status from the original
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Immersive mode is now always on — the UI chrome automatically adapts
to match the active terminal theme. The toggle in Appearance settings
has been removed and the TerminalLayer preview logic simplified.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Unify theme item style across ThemeSelectPanel (host details) and
ThemeSelectModal (settings) with a shared ThemeList component featuring
compact swatch previews, dark/light/custom grouping, and no-rounded
selection highlight.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
On Windows the resolved path may be a .cmd shim which spawn()
cannot execute without shell: true. Keep acpCommand as the bare
"copilot" from AGENT_DEFAULTS and let the system resolve it via
PATH at launch time.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- When building managed copilot agent config, set acpCommand to the
resolved path instead of bare "copilot" so custom paths work for
ACP launches
- Add USERPROFILE fallback in prepareCopilotHome for Windows where
HOME may not be set
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Adapt copilot agent additions to the refactored managed agent
architecture (resolveAgentPath + buildManagedAgentState pattern).
Add copilot to ManagedAgentKey type and MANAGED_AGENT_META.
Keep main's resolveMcpServerRuntimeCommand (process.execPath +
ELECTRON_RUN_AS_NODE) over PR's runtimeCommand parameter approach.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Move agent dedup/consolidation from a useEffect (that depended on
externalAgents while also setting it) into resolveAgentPath, using
setExternalAgents(prev => ...) callback form. Use a ref for
defaultAgentId to avoid dependency cycles and keep it in sync
across concurrent codex+claude resolves.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat: make SFTP folder transfer concurrency configurable
The number of files transferred in parallel during folder uploads/
downloads was hardcoded to 4. Add a setting (1-16, default 4) in
Settings > SFTP so users can tune it for their server and network.
The value is read from localStorage at transfer start time, so
changes take effect on the next folder transfer without restart.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: sync transfer concurrency setting across windows
Add notifySettingsChanged broadcast, IPC onSettingsChanged handler,
and storage event listener for the transfer concurrency setting so
changes propagate to all open windows immediately.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: move setSftpTransferConcurrency after notifySettingsChanged
The useCallback referenced notifySettingsChanged before it was
defined (const is not hoisted), causing a ReferenceError on mount.
Move the definition after notifySettingsChanged.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat: add workspace focus indicator style setting (dim vs border)
Users can now choose between two focus indicator styles for split
terminal panes:
- Dim: reduces opacity of unfocused panes (current default)
- Border: shows a colored border on the focused pane (old style)
The setting is in Settings > Terminal > Workspace Focus Indicator.
Implementation uses a CSS data attribute on documentElement to
toggle between the two styles, avoiding prop threading.
Closes#556
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: sync workspace focus style across windows
Add cross-window notification handling for the workspace focus style
setting so changes in the Settings window take effect in the main
terminal window immediately.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat: add default file opener setting for SFTP
Add a global default opener that is used as fallback when no
per-extension file association exists, eliminating the need to
select an editor for every new file type.
The default opener is stored as a special "*" key in the existing
file associations map, so it syncs and persists automatically.
Settings UI provides three options: always ask (current behavior),
built-in editor, or a chosen system application.
Closes#550
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: use reserved key for default opener to avoid extension collision
Replace "*" with "__default__" as the default opener storage key to
prevent a theoretical collision with files named "foo.*" where
getFileExtension would return "*".
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: skip built-in editor default for known binary files
When the global default opener is set to built-in editor, binary files
(zip, png, etc.) should not be opened as text. Fall back to the chooser
dialog for known binary formats instead.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* refactor: store default opener in separate localStorage key
Move the default opener out of the FileAssociationsMap into its own
storage key (STORAGE_KEY_SFTP_DEFAULT_OPENER) to completely eliminate
any possibility of key collision with file extensions.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(sftp): add onListDirectory to SftpPaneCallbacks interface
Co-Authored-By: Claude Sonnet 4.6 (1M context) <noreply@anthropic.com>
* feat(sftp): implement onListDirectory in left and right callbacks
* feat(sftp): add tree view i18n keys
* feat(sftp): add list/tree view mode toggle to toolbar
* feat(sftp): add viewMode state and tree view conditional rendering to SftpPaneView
* feat(sftp): implement SftpPaneTreeView with lazy loading and context menu
Co-Authored-By: Claude Sonnet 4.6 (1M context) <noreply@anthropic.com>
* fix(sftp): resolve lint errors in tree view implementation
Rename inner `t` and `ts` variables in onListDirectory callbacks to
`toSize`/`toTs`/`ms` to avoid shadowing the outer `t` translation param.
Co-Authored-By: Claude Sonnet 4.6 (1M context) <noreply@anthropic.com>
* fix(sftp): resolve post-merge lint errors
- Remove duplicate sftp.context.copyPath i18n key (upstream added it too)
- Remove unused AlertCircle import from SftpPaneFileList (upstream removed usage)
Co-Authored-By: Claude Sonnet 4.6 (1M context) <noreply@anthropic.com>
* perf(sftp): optimize SftpPaneTreeView render pipeline
Split useMemo into two stages so selection changes no longer
rebuild the full node descriptor array. Extract stable
selection-aware callbacks (drag, copy, delete) via refs so
TreeNode React.memo can reliably bail out. Remove unused props
(onNavigateTo, draggedFiles), move NodeDescriptor type to
module scope, and fix selectedFiles undefined bug in context menu.
* feat(sftp): add path-aware rename and delete for tree view
Wire renameFileAtPath and deleteFilesAtPath through the full
callback stack so tree view context menu actions operate on
full paths instead of basenames. Update useSftpPaneDialogs to
accept entryPath in openRenameDialog and resolve parent dir
in handleDelete, keeping list view behaviour unchanged.
* fix: harden SFTP tree view actions and selection
* fix: support tree selection shortcuts and nested create targets
* fix: keep SFTP tree view sorting in sync
* Improve SFTP tree view interactions and refresh behavior
* Optimize SFTP tree refresh and pane state usage
* Reduce remaining SFTP tree performance overhead
* Fix nested SFTP drop target routing
* Restore keyboard access to parent tree entry
* Revert "Display approved AI commands in terminal sessions before their output. (#546)"
This reverts commit 6d19413025.
* Fix SFTP tree view review issues: accessibility, view persistence, and polish
- Add aria-pressed/aria-checked to view mode toggle buttons for accessibility
- Preserve tree expanded state across view mode switches (CSS hidden instead of unmount)
- Add cross-window localStorage sync for view mode preferences
- Add loading/reconnecting overlay UI for tree view
- Fix toggleExpand concurrent load guard and file list memo dependencies
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* Fix review round 2: scroll jank, memo correctness, path handling, a11y
Critical:
- Fix rAF scroll throttle capturing stale scrollTop (use ref for latest value)
- Add sftpDefaultViewMode to memo comparator to react to settings changes
- Replace ad-hoc path splitting in handleDelete with getParentPath/getFileName
- Add fullPath to permissionsState prop type in SftpOverlays
Important:
- Remove treeSelectionState from handleNodeClick/handleTreeContainerKeyDown
deps to prevent full tree re-render on every expand/collapse
- Add role="radiogroup" container and aria-label to view toggle buttons
- Wrap JSON.parse in try/catch for storage event handler
- Deduplicate getParentPath call in renameFileAtPath
- Parallelize reloadExpandedPaths with Promise.all
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* Clean up review round 3: dead code, logging, and minor optimizations
- Remove dead isParentNavigation field from tree selection store (always
false since ".." entries are filtered before entering the store)
- Replace empty catch blocks in dialog handlers with logger.warn
- Extract duplicated initialViewMode expression in SftpPaneView
- Stabilize handleSetViewMode by using refs for callbacks instead of
depending on the entire callbacks object
- Remove redundant FINISH_LOADING dispatch on error path in
loadChildrenForPath (LOAD_ERROR already removes from loadingPaths)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* Add same-pane drag-move, move-to dialog, and fix breadcrumb/tree sync
Features:
- Same-pane drag-and-drop to move files between directories in tree view
- "Move to..." context menu with path input dialog and autocomplete
- "Move to parent directory" quick action in context menu
- "Navigate to" context menu item for directories
- Error state UI with retry button in tree view
- Breadcrumb path deferred display during loading
Fixes:
- Fix breadcrumb and tree content showing different paths during navigation
by atomically syncing resolvedRootPath and rootEntries in a single effect
- Fix toolbar displayPath updating before files load (defer until !loading)
- Reconnection detection and session error reporting in tree directory listing
UI improvements:
- Column widths use minmax()+fr instead of percentages with min-width protection
- Column headers truncate with overflow protection
- buildSftpColumnTemplate utility shared between tree and list views
- Column resize limits per field
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* Reapply "Display approved AI commands in terminal sessions before their output. (#546)"
This reverts commit f739e81e8d.
* fix: resolve remote-to-local drag transfer source pane
* fix: invalidate target cache after transfers
* fix: reload tree root after create mutations
* fix: use receive callback for tree drop targets
* fix: trigger pane refresh after transfer completion
* fix: handle transfer refresh tokens only once
* fix: show move-to-parent for direct children
* fix: refresh list view after move-to-parent changes
* fix: address review issues in transfer refresh and retry flows
* feat: improve list view keyboard and folder drops
* fix: strengthen list view keyboard selection feedback
* style: make list view selection more obvious
* fix: keep list selection visible during keyboard navigation
* fix: rerender list rows when selection changes
* fix: sync list selection highlight updates
* style: align list selection with tree view
* style: hide list selection highlight when pane is unfocused
* feat: clear list selection when clicking empty space
* refine transfer row layout and clear list selection on empty click
* perf: make transfer size discovery asynchronous
* perf: parallelize SFTP transfers and show per-file progress for directories
- Parallelize file transfers within directories (4 concurrent workers)
- Batch pre-create all directories before file uploads begin
- Run conflict check and size discovery concurrently
- Parallelize external drag-drop file uploads (4 concurrent workers)
- Show individual child file progress under parent directory task
- Parent directory task displays file count progress (e.g. "3/10 files")
- Child tasks auto-cleanup on parent completion or cancellation
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* refine sftp transfer panel ux
* fix sftp sidebar and upload task flow
* polish sftp transfer interactions
---------
Co-authored-by: Claude Sonnet 4.6 (1M context) <noreply@anthropic.com>
Co-authored-by: bincxz <16399091+binaricat@users.noreply.github.com>
* fix: prevent double-click update crash and improve update UX (#522)
- Add state guards to prevent checkForUpdates during active download
- Disable "Check for Updates" button during checking/downloading/ready
- Make version badge trigger in-app download instead of opening GitHub
- Change error toast action from "Open Releases" to "View in Settings"
- Add "Download Now" button in system settings as primary action
- Keep GitHub release link as secondary fallback in settings
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: reset download state when downloadUpdate() rejects
Clears _isDownloading and broadcasts error status on catch so the
update UI does not get stuck after a failed download attempt.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: only show Download Now after a completed update check
Prevents downloadUpdate() from being called with stale cached state
before electron-updater has run checkForUpdates(), avoiding a
"Please check update first" error.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: use correct broadcast function and prime updater before download
- Replace undefined broadcastUpdateStatus with broadcastToAllWindows
- Call checkForUpdate before downloadUpdate to ensure electron-updater
has populated update metadata
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: use correct error payload field and guard unsupported platforms
- Use { error: ... } instead of { message: ... } in download error
broadcast to match renderer expectations
- Bail out of startDownload when checkForUpdate returns unsupported
or throws, instead of entering a failing download path
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: guard startDownload against in-flight and no-update check results
Bail out when checkForUpdate returns checking, not-available, or
unsupported states to prevent calling downloadUpdate prematurely.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: remove duplicate error broadcast and fallback to releases on unsupported
- Remove redundant broadcastToAllWindows in download catch (global
error listener already handles it)
- Open release page instead of silently returning when platform
does not support auto-update
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: check supported before available to ensure release page fallback
Unsupported platforms return { available: false, supported: false },
so the supported check must come first to open the release page
instead of silently returning.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: skip download when update is already ready or downloading
Guard against re-downloading when checkForUpdate returns ready or
downloading sentinel, preventing overwrite of valid install state.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: fallback to release page when electron-updater reports no update
When GitHub API found an update but electron-updater does not,
open the release page instead of silently doing nothing.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat: expose advanced AI model parameters in provider settings (#532)
Add collapsible "Advanced Parameters" section to provider config with
optional max_tokens, temperature, top_p, frequency_penalty, and
presence_penalty fields. Parameters are merged into streamText() calls
only when explicitly set, otherwise provider defaults apply.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: use maxOutputTokens instead of maxTokens for ai@6 SDK
The streamText CallSettings in ai@6 expects maxOutputTokens, not
maxTokens. Without this fix the user's max_tokens setting is silently
ignored.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: allow negative penalty input and clamp params on save
- Use raw string state for penalty fields so typing "-" is not
discarded before the digit is entered
- Clamp all parameters to valid ranges on save (temperature 0-2,
topP 0-1, penalties -2 to 2)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: use raw string state for all numeric advanced param inputs
Prevents intermediate text like "0." from being normalized to "0"
during keyboard entry of decimal values for temperature, topP, and
maxTokens fields.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: clamp max_tokens to minimum of 1 after rounding
Prevents Math.round(0.4) = 0 from being persisted and causing
streamText to reject with "maxOutputTokens must be >= 1".
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* fix: reject non-finite max_tokens before persisting
Guard with Number.isFinite to prevent Infinity from being stored
and forwarded to streamText.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Add smoothScrolling boolean to TerminalSettings (default: true)
- Wire setting to xterm.js smoothScrollDuration (120ms when on, 0 when off)
- Add toggle in terminal settings UI
- Include in sync payload and i18n strings (en, zh-CN)
Inspired by #467 (@crawt).
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Replace flex-wrap layout with single-line truncate + title tooltip
for the environment metadata row, preventing awkward wrapping when
the settings window is narrow.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Extract error properties (code, errno, syscall, hostname, port,
signal, level) into errorMeta field for system-level diagnostics.
- Add extra field for structured context (e.g. render-process-gone
reason and exitCode as separate fields, not just a string).
- Add process PID for correlating with OS-level logs.
- Accept optional extra parameter in captureError() for callers to
attach structured context data.
- Display errorMeta and extra as tagged badges in the crash log viewer.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>