Commit Graph
508 Commits
Author SHA1 Message Date
陈大猫andClaude Opus 4.6 db69d5ac39 [codex] Harden sync overwrite protection and add local restore history (#720)
* fix: harden sync overwrite recovery

* refactor: separate backup retention settings

* refactor: align backup retention controls

* refactor: simplify backup retention card

* fix: address PR #720 deep-review findings

- Close the cross-window restore race by holding a time-bounded barrier
  in localStorage during every destructive apply; useAutoSync skips
  pushes while it's set, preventing a pre-restore snapshot from
  clobbering just-restored cloud data.
- Round-trip startup three-way merges so merged-in local additions
  actually reach the cloud instead of living only on the device that
  ran the merge until the next edit.
- Upgrade sync signatures from a 64-char ciphertext prefix to full
  SHA-256 (v3), closing the tail-mutation replay weakness.
- Harden the vault-backup IPC: payload size cap, enum-validated reason,
  sanitized version strings, strict maxCount, concurrent-call mutex,
  monotonic createdAt to avoid same-ms ordering ties.
- Extract the anchor-change decision into a pure module with unit tests
  covering no-anchor, resource-id drift, and signature mismatch paths.
- Capture the protective backup from the pre-apply closure snapshot so
  it reflects what's being replaced rather than what was imported.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address PR #720 follow-up review findings

Make protective backup abort-on-failure (was best-effort console.error),
preserve nested syncedAt in fingerprint, use UTF-8 byte length for size
guard, throw on conflict-inspect failure so stale uploads can't leak
through, treat unreadable remote as changed, canonical-JSON signature
meta, and hold the version stamp on transient backup failures so the
retry path still fires.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address second-pass review findings on PR #720

- Hold version-change stamp when payload is non-meaningful (covers the
  startup vault-rehydrate race where a transient empty snapshot would
  permanently skip the upgrade backup).
- readBackupRecord stat-checks before readFile so an oversized file in
  the backup dir cannot OOM the renderer on enumeration.
- Reject maxBackups input outside 1..100 instead of silently clamping
  (matches the i18n error copy and the main-process sanitizer bound).
- Wrap USE_LOCAL conflict-resolution push in withRestoreBarrier so a
  concurrent auto-sync in another window cannot interleave.
- sha256Hex throws SyncSignatureUnavailableError on missing WebCrypto
  subtle; createSyncedFileSignature returns null, forcing the
  unreadable-remote → three-way-merge path instead of a weak
  length-only pseudo-signature.
- Document that array order in normalizePayloadForHash is an invariant
  enforced by producers, not the hash function.
- Drop three-way-merge completion logs from console.log to console.info.
- Comment the implicit restore → store-listener refresh chain so
  future refactors don't silently break the UI reload path.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address third-pass review findings on PR #720

Resolves I-3 through I-8 and related cleanup items identified in the
deep review. Highlights:

- replace setTimeout(0) post-merge round-trip with a direct
  syncAllProviders call using the already-computed merged payload,
  removing the React-commit race
- resolve the empty-vault confirmation promise on unmount so a
  mid-dialog window teardown doesn't leak the resolver
- retry the version-change backup as hosts/keys hydrate, instead of
  latching on the first (possibly empty) snapshot
- heartbeat-refresh the cross-window restore barrier so long applies
  cannot expose a post-60s window to concurrent auto-sync
- add a diagnostic warning when connected providers hold divergent
  bases (multi-account configurations)
- surface a user-visible "Sync paused" toast when startup inspect
  fails, replacing the previous silent gate-open
- tie-break backup list sort by id when createdAt collides
- extract applyProtectedSyncPayload so the main and settings windows
  cannot drift on restore-barrier / protective-backup handling

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address deep-review findings on PR #720

Deep re-review surfaced six Important issues that survived the prior
four review rounds. All are hardened here:

- I1: fsync the protective backup file AND its directory before the
  rename completes, so a system crash between backup creation and the
  restore it guards cannot leave a torn/zero-length safety net.
- I3: persist an apply-in-progress sentinel across the non-atomic
  localStorage writes in applySyncPayload. A crash mid-apply now
  surfaces on the next startup (toast + refuse auto-push) instead of
  silently pushing the half-applied state over an intact cloud copy.
- I2: only open the auto-sync gate (remoteCheckDoneRef) when the
  startup inspect validated cleanly. Add a bounded exponential-backoff
  retry so a transient inspect failure self-heals instead of wedging
  auto-sync until restart.
- I5: save the sync base BEFORE advancing the per-provider anchor
  inside uploadToProvider. A renderer crash between the two writes
  now degrades to "stale anchor forces re-inspect on next run," which
  re-merges against the fresh base — eliminating the silent
  base-drift window where a 3rd-device race could misclassify
  entries.
- I6: main process broadcasts a vaultBackups:changed IPC event on
  every mutation; useLocalVaultBackups subscribes so protective
  backups created from the main window show up in the Settings
  backup list without manual refresh.
- I4: update PR description + code comment to match the actual
  (safer) design: auto-sync gate opens on vault init, with
  hasMeaningfulSyncData + restore barrier preventing empty-push; the
  version-change backup is best-effort and retries as data hydrates.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: serialize startup checkRemoteVersion and stabilize its deps

Re-review flagged that checkRemoteVersion's useCallback depended on
`config` — a fresh object literal from App.tsx on every render — so
the retry effect restarted with attempt=0 on every vault edit and
could spawn overlapping in-flight inspect+apply runs. Two concurrent
commitRemoteInspection + onApplyPayload calls could race on the
apply-in-progress sentinel around interleaved writes.

Route `buildPayload`, `config.onApplyPayload`, and `config.startupReady`
through refs so checkRemoteVersion's identity no longer churns with
unrelated App state. Add an in-flight guard that returns early when a
previous invocation is still awaiting the network, closing the
same-window re-entry gap that withRestoreBarrier intentionally doesn't
cover.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: release in-flight lock on no-connected-provider early return

Third-pass review caught that `checkRemoteInFlightRef` was acquired
before the `!connectedProvider` check, so that early return leaked
the lock and every subsequent retry-timer tick silently no-op'd.
Move the acquisition past the early return so the only path that
takes the lock reaches the finally-release.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-15 03:09:55 +08:00
bincxz 1ca2cd8ec2 feat: add "paste selection" terminal command with bindable shortcut
Adds a new terminal action that pastes the terminal's current selection
at the cursor without going through the system clipboard — the equivalent
of X11 PRIMARY-selection paste. Default shortcut: ⌘ + Shift + X / Ctrl + Shift + X.

Also surfaces the action in the terminal right-click menu, disabled when
there is no selection. Does not change middle-click paste behavior.

Closes #637
2026-04-14 16:22:51 +08:00
陈大猫 717d8b718a Merge pull request #712 from tces1/dev
feat: scope AI draft and session resume state
2026-04-14 15:58:32 +08:00
Eric Chan 363f03a92d fix ai draft scope state updates 2026-04-14 14:57:45 +08:00
Eric ChanandCopilot c5d15a14c9 fix: avoid orphaned AI session storage churn
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
2026-04-14 12:33:22 +08:00
Eric ChanandCopilot 75dc3dd72b feat: scope AI draft and session resume state
- persist drafts, panel views, and active sessions per terminal/workspace scope
- restore scoped AI session selection on reconnect and cold mount
- prefer unsent drafts over implicit history fallback
- avoid redundant active session map rewrites during scoped cleanup

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
2026-04-14 11:55:34 +08:00
bincxzandClaude Opus 4.6 cc2702b825 fix: decouple Codex agent auth from netcatty provider list (#705)
Codex agent auth must be determined entirely by ~/.codex/auth.json or
~/.codex/config.toml. Before this change, if the user configured any
OpenAI-compatible API provider in netcatty settings (for Catty agent use),
useAIChatStreaming would silently hand that provider's apiKey to the Codex
agent too, causing aiBridge to spawn codex-acp with authMethodId
"codex-api-key" and completely override the user's ChatGPT login.

The regression was introduced in PR #702 (v1.0.89) when findManagedAgent
Provider started matching generic "custom" providers for Codex. Users who
logged into Codex via ChatGPT and also had a netcatty-configured custom
provider saw the UI flip to "API mode" on refresh and their ChatGPT
session get ignored.

Remove the codex branch from the agentProviderId resolver and from
findManagedAgentProvider itself. Also drop the now-meaningless
hasCompatibleProvider hint on the Codex settings card and its i18n copy.
Claude agent behavior is unchanged.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-13 19:08:18 +08:00
陈大猫 af2589e60b Merge pull request #704 from tces1/MoreSkills
feat: add Netcatty user skills scanning and chat selection flow
2026-04-13 13:33:12 +08:00
bincxzandClaude Opus 4.6 8f68e24057 fix: address review feedback on config.toml detection flow
Round of fixes driven by two parallel reviewers:

- i18n placeholder mismatch (P0). Locale strings used ${envKey} (literal
  dollar-sign) but the replace call passed '{envKey}', so the warning
  displayed a raw "${envKey}" instead of the real env var name. Align on
  the codebase-standard {envKey} form.

- Fingerprint now folds the hash of the actual auth material (P1).
  readCodexCustomProviderConfig computes a sha256 over the hardcoded
  api_key or the resolved env_key value and returns authHash. The ACP
  provider-reuse fingerprint includes it, so rotating the key in
  ~/.zshrc + restarting netcatty (which refreshes shellEnv) now
  invalidates the cached provider instance instead of keeping the stale
  key alive. Raw value never crosses the IPC boundary — we only send
  the hex digest.

- Fail loud when config.toml's env_key isn't exported (P1). Previously
  we'd sail into spawn and let codex-acp fail mid-request with a cryptic
  "Missing environment variable". Now the stream handler rejects up
  front with a targeted error naming the missing variable and pointing
  at ~/.zshrc.

- TOML parser: basic-string escape tracking (P1). findUnquotedHash now
  tracks an explicit `escaped` flag (and only honors escapes inside
  double-quoted strings, since literal single-quoted strings don't), so
  values like "C:\\path\\" close correctly instead of consuming the
  trailing `#` as part of the string.

- TOML parser: strip UTF-8 BOM (P2). Windows editors frequently prepend
  one and the first-key regex would silently fail to match, dropping
  everything before the first section header.

- Picker correctness when config.toml lacks a `model` field (P1).
  Instead of silently falling back to CODEX_MODEL_PRESETS (stock
  OpenAI IDs the user's custom endpoint can't serve), show an empty
  list so the picker disables. Track codexCustomConfigResolved so we
  distinguish "still loading" from "not a custom-config session" and
  only clear the preset list once the integration probe confirmed
  connected_custom_config.

- Logout handler isConnected also considers connected_custom_config
  (P2 consistency), matching get-integration.

- Model picker popover clamps its left position so max-w-[360px] can't
  push it past the right edge of a narrow AI side panel (P2).

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-13 02:21:36 +08:00
bincxzandClaude Opus 4.6 18c001e9c5 fix: show custom config even when env_key is not exported yet
The first pass required both a custom model_provider in ~/.codex/config.toml
AND the referenced env_key to already be present in the shell environment.
If a user had the config file set up but hadn't (yet) exported the key in
their shell, detection returned null and the UI fell back to "Not
connected" + "Connect ChatGPT" — which is the exact flow they were trying
to avoid.

The config.toml is a strong enough signal of intent on its own. Keep the
integration in the connected_custom_config state regardless of env_key
availability, but expose envKeyPresent on the response so the UI can
explicitly warn "Warning: $MY_KEY is not set in your shell — export it".
Status label and color also flip to amber ("Custom config detected — env
var missing") so the state is easy to spot without dropping back to the
login prompt.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-13 01:53:33 +08:00
bincxzandClaude Opus 4.6 c2c6b265d4 feat: detect user's ~/.codex/config.toml custom provider as ready state
Users who hand-configure ~/.codex/config.toml with a custom model_provider
and matching [model_providers.<name>] entry are fully functional from the
Codex CLI, but netcatty only looked at codex login status — which reports
on ~/.codex/auth.json alone — and would therefore push them into the
ChatGPT login flow even though the CLI works for them.

Add a minimal TOML parser for the narrow subset we need (top-level keys
plus [model_providers.<name>] string tables), and readCodexCustomProvider
Config() to detect a usable custom-provider setup: an active model_provider
that isn't the built-in openai preset, pointing at a provider entry whose
env_key is set in the shell env (or api_key is hardcoded).

Surface this as a new integration state "connected_custom_config", add a
customConfig summary on the IPC response, and tweak the Codex settings
card so it shows the custom-provider name, hides the Connect ChatGPT
button, and drops the stale "OpenAI-compatible provider" hint when this
path is active.

At Codex-ACP spawn time, introduce getCodexAuthOverride() so we only pass
authMethodId: "chatgpt" when we truly have no other option. When a
netcatty-managed API key is present we still use "codex-api-key"; when the
user has a custom config we omit authMethodId entirely so codex-acp
resolves auth from the shell env / config.toml itself. Fold the detected
custom config (provider name, base url, env key presence) into the
provider reuse fingerprint so edits to config.toml invalidate cached ACP
instances.

Fixes the Codex half of #677 for users who skip Settings → AI providers.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-13 01:49:23 +08:00
bincxz 1e50b66407 fix: finish Codex provider follow-up for #677 2026-04-13 01:21:05 +08:00
bincxzandClaude Opus 4.6 f89afc0e05 feat: add setting to hide the standalone SFTP top tab
Adds a "Show SFTP tab" toggle in Settings → Appearance (under the
Vault section) that controls visibility of the standalone SFTP view
in the top tab bar. When disabled:

- The SFTP tab is removed from the top tab strip.
- The openSftp hotkey (Ctrl+Shift+O / ⌘⇧O) becomes a no-op.
- If the user is currently on the SFTP tab, the active tab auto-
  switches to Vaults.

The in-session SFTP side panel (opened from the terminal toolbar) is
unaffected — that is the surface users keep when they hide the
top-level tab.

Setting persists via localStorage, syncs across windows, and is
included in the cloud SyncPayload alongside the existing Vault
visibility toggles (showRecentHosts,
showOnlyUngroupedHostsInRoot). Default: on.

Addresses the first ask in #690.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-12 23:57:15 +08:00
bincxzandClaude Opus 4.6 97e78624bb fix: remove hardcoded Ctrl+F handler that bypassed configurable shortcuts
The xterm custom key event handler intercepted plain Ctrl+F / Cmd+F to
open terminal search, ignoring the user's configured keybinding scheme.
This conflicted with zsh's forward-char (Ctrl+F) and gave users no way
to disable it via the Shortcuts settings tab.

The configurable keybinding system below already routes the
searchTerminal action via checkAppShortcut, with defaults of
Ctrl+Shift+F (PC) and Cmd+F (Mac). Dropping the hardcoded branch
lets the user's settings take effect. Also remove the stale
"(Ctrl+F)" label from the toolbar tooltip since the shortcut is
configurable and the default on PC is Ctrl+Shift+F.

Fixes #694

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-12 23:42:27 +08:00
bincxz 8e6392e503 persist vault root filter toggles immediately 2026-04-12 23:30:02 +08:00
bincxz 8b99f2411f fix vault root host filter sync and empty states 2026-04-12 23:27:36 +08:00
bincxz 3089cab88d add vault root ungrouped host toggle 2026-04-12 23:09:03 +08:00
Eric Chan 84423a0096 fix: resolve TypeScript errors and optimize User Skills with async IO 2026-04-12 17:11:50 +08:00
bincxz c3c579b8a0 fix: close remaining theme sync gaps 2026-04-10 21:43:15 +08:00
bincxz 75bbd1f300 fix: preserve theme inheritance and modal rollback 2026-04-10 21:21:51 +08:00
bincxz 4ee4ef7b60 fix: polish follow-app terminal theme UX 2026-04-10 21:03:14 +08:00
Eric Chan 58bc08a045 Add user skills injection and picker UI 2026-04-10 20:53:39 +08:00
bincxzandClaude Opus 4.6 76d37d982a fix: upgrade-safe default + cross-window broadcast for follow-theme
P1: Follow mode defaulted ON when the storage key was missing, which
is true for ALL existing users after upgrade (not just fresh
installs). Now checks whether a terminal theme was already stored —
if so, this is an upgrade and we default OFF to preserve the user's
manual choice. Only genuinely fresh installs (no terminal theme in
storage) default to ON.

P2: The follow-theme persist effect now calls notifySettingsChanged
and a matching branch in the cross-window storage event handler
syncs the toggle state across windows, matching the pattern used by
all other terminal settings.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-10 20:14:05 +08:00
bincxzandClaude Opus 4.6 6d2f3f28c0 feat: add "Follow Application Theme" for terminal + 14 UI-matched terminal themes (#675)
When enabled (default for new users), the terminal theme automatically
switches to match the active app UI theme — so the terminal background
blends seamlessly with the app chrome, regardless of which UI theme
preset the user picks (Snow, Midnight, Forest, etc.).

## New terminal themes (14)

Each built-in UI theme preset now has a corresponding terminal theme
with an exactly matching background color:

Light: ui-snow, ui-pure-white, ui-ivory, ui-mist, ui-mint, ui-sand,
ui-lavender — ANSI palette based on netcatty-light with per-theme
cursor colors that complement the UI accent.

Dark: ui-pure-black, ui-midnight, ui-deep-blue, ui-vscode,
ui-graphite, ui-obsidian, ui-forest — ANSI palette based on
netcatty-dark with accent-matched cursors and selections.

## "Follow Application Theme" setting

- New toggle in Settings → Terminal → Theme section
- Default ON for new users, persisted in localStorage
- When ON: terminal theme auto-derived from the active UI theme via
  a mapping table in domain/terminalAppearance.ts
- When OFF: manual theme selector shown (existing behavior)
- Switching the app between light/dark (or changing the UI theme
  preset) instantly updates the terminal theme

## Files changed (9)

- terminalThemes.ts: +14 theme definitions
- terminalAppearance.ts: UI→terminal mapping table +
  getTerminalThemeForUiTheme()
- useSettingsState.ts: followAppTerminalTheme state + persist +
  currentTerminalTheme derivation
- storageKeys.ts: new storage key
- SettingsTerminalTab.tsx: toggle UI + conditional theme selector
- SettingsPage.tsx: pass new props
- App.tsx: destructure new state
- en.ts + zh-CN.ts: 2 new i18n keys

Closes #675

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-10 20:06:13 +08:00
Eric Chan c771979178 Add Skills + CLI mode for external agents (#599)
* Add Skills + CLI external agent workflow

* feat: add Skills + CLI transport for ACP agents

* chore: remove branch-local compatibility shims
2026-04-10 18:41:53 +08:00
陈大猫andClaude Opus 4.6 58c651500e feat: add Gist revision history UI for vault restore (#685)
* feat: add Gist revision history UI for vault restore (#679)

Adds a "History" button on the GitHub Gist provider card in
Settings → Sync & Cloud. Clicking it opens a modal that lists all
Gist revisions (newest first) and lets the user preview and restore
any historical version with one click.

## How it works

1. The GitHub API already returns a `history` array when fetching a
   Gist (`GET /gists/{id}`). The existing `getGistHistory()` reads
   this. A new `downloadGistRevision(sha)` function fetches a
   specific revision via `GET /gists/{id}/{sha}`.

2. CloudSyncManager exposes `getGistRevisionHistory()` (metadata
   only, no decryption) and `downloadGistRevision(sha)` (decrypt
   + return payload and preview counts).

3. useCloudSync threads both methods through to the UI.

4. CloudSyncSettings renders a three-state modal:
   - **Loading**: spinner while fetching revision list
   - **Revision list**: clickable rows with SHA prefix + date,
     "Current" badge on the latest
   - **Preview**: after clicking a revision, shows entity counts
     (hosts, keys, snippets, identities) and a "Restore This
     Version" button

5. Decryption uses the current master password. If the revision
   was encrypted with a different password (user changed it since
   then), a clear error message is shown instead of a crash.

## Changes

- `GitHubAdapter.ts`: add `downloadGistRevision()` standalone
  function + `getHistory()` / `downloadRevision()` class methods
- `CloudSyncManager.ts`: add `getGistRevisionHistory()` and
  `downloadGistRevision(sha)` with decrypt + preview
- `useCloudSync.ts`: expose both methods
- `CloudSyncSettings.tsx`: add `extraActions` slot to ProviderCard,
  render "History" button on GitHub card, revision history modal
  with list → preview → restore flow
- `en.ts` + `zh-CN.ts`: 18 new i18n keys for the modal

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: use getConnectedAdapter and lazy gist discovery for history APIs

P1: CloudSyncManager's history methods accessed this.adapters directly
instead of getConnectedAdapter(), which lazily initializes adapters.
After an app restart the adapter map is empty even though the provider
is persisted as connected, making history fail until another sync
path initializes it.

P2: GitHubAdapter.getHistory() and downloadRevision() bailed early
when gistId was missing, unlike download() which calls findSyncGist()
to lazily discover it. Users whose gist was created after initial
setup would see no revisions.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-2 codex review on PR #685

P1: Renamed cloudSync.history.* keys to cloudSync.revisionHistory.*
to avoid duplicate key collision with the existing "Sync History"
section title.

P2: Added getGistRevisionHistory and downloadGistRevision to the
CloudSyncHook type interface so the hook contract matches reality.

P2: Simplified decrypt error handling — any error from the decrypt
path now shows the friendly "cannot decrypt" message rather than
relying on fragile substring matching.

P2: Clear historyRevisions on each handleOpenHistory call so stale
data doesn't linger under error banners on retry.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: restore correct i18n key for Sync History section title

The sed rename pass accidentally changed the Sync History panel
heading (line 1290) from cloudSync.history.title to
cloudSync.revisionHistory.title. Restored the original key so the
two sections have distinct titles. Also removed unused err parameter
in the catch block.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-10 16:47:16 +08:00
陈大猫andClaude Opus 4.6 bcf653dd2e fix: prevent empty vault from overwriting cloud data on startup (#683)
* fix: prevent empty vault from overwriting cloud data on startup (#679)

Fixes a data-loss scenario where an empty local vault (caused by an
update, storage corruption, or import failure) silently overwrites
a non-empty cloud vault on startup via auto-sync.

The root cause is a startup timing race: the debounced auto-sync
effect (3s after data change) can fire before checkRemoteVersion
(1s delay + async download) completes its remote pull. When the
local vault is empty, this pushes an empty payload to the Gist,
permanently erasing the user's data.

Four complementary fixes:

A. Empty vault push guard (useAutoSync syncNow):
   Auto-sync refuses to push a payload where hosts, keys, snippets,
   and identities are ALL empty. Manual sync from Settings is still
   allowed for the rare case where the user intentionally emptied
   everything. Prevents the most dangerous path.

B. Skip redundant post-merge push (useAutoSync checkRemoteVersion):
   After applying a three-way merge result from the remote, set
   skipNextSyncRef so the data-change effect does not immediately
   re-upload the same payload. Removes one unnecessary API call per
   startup sync.

C. Gate auto-sync on remote check completion (useAutoSync effect):
   Added remoteCheckDoneRef — the debounced auto-sync effect will
   not fire until checkRemoteVersion has completed (success or
   failure). This closes the timing window entirely: an empty vault
   can no longer race ahead of the remote pull.

D. Empty-vault-vs-cloud confirmation dialog (App.tsx + useAutoSync):
   When checkRemoteVersion detects local is empty but cloud has
   data, it pauses and shows a root-level dialog with two options:
   - "Restore from Cloud" (recommended) — applies the remote payload
   - "Keep Empty" — starts fresh with an empty vault
   The dialog blocks the sync flow via a Promise that resolves when
   the user picks an option. This gives users explicit control over
   a situation that previously happened silently behind their backs.

Also adds en + zh-CN i18n strings for the new dialog and toast
messages.

Closes #679

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address codex review on PR #683

P1-1: Unified isPayloadEffectivelyEmpty helper covering all synced
entity arrays (hosts, keys, snippets, identities, customGroups,
snippetPackages, portForwardingRules, knownHosts, groupConfigs).
Replaces the three inline checks in syncNow and checkRemoteVersion
that only covered hosts/keys/snippets/identities.

P1-2: Replaced hand-rolled overlay div with the project's existing
Dialog/DialogContent/DialogHeader/DialogFooter components. This adds
role="dialog", aria-modal, focus trap, and ESC-key dismiss for free.
Used lucide-react AlertTriangle/Download/Trash2 icons instead of
inline SVGs.

P2-1: Guard against double-resolve in resolveEmptyVaultConflict by
nulling the ref immediately on first call.

P2-2: Replaced hardcoded "N hosts, N keys, N snippets" with an i18n
key using interpolation (cloudSummary) so the count text is properly
translated in zh-CN.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address round-2 codex review on PR #683

P1: isPayloadEffectivelyEmpty now also checks the settings object.
A vault with only settings (e.g. custom theme, font size) and zero
hosts/keys/snippets is no longer treated as empty.

P1: Dialog accessibility — use hideCloseButton to remove the non-
functional close button, onEscapeKeyDown + onOpenChange prevent
dismiss (the user MUST choose an option), and wrap the description
in DialogDescription so aria-describedby is properly linked.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: use single-brace interpolation syntax for cloudSummary i18n key

The project's i18n system uses single-brace placeholders ({var}),
not double-brace ({{var}}). The double-brace syntax was rendering
as raw text instead of being interpolated.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-10 15:20:27 +08:00
陈大猫andClaude Opus 4.6 e8b9122270 feat: auto-detect network devices from SSH banner and skip stats polling (#680)
* feat: auto-detect network devices from SSH banner and skip stats polling (#674)

Fixes rapid AAA session churn reported on Cisco/HPE/similar network
devices running Netcatty. The root cause was two separate polls that
both open fresh exec channels (each counted as its own AAA session on
many network devices):

- runDistroDetection() opens a brand new SSH connection every time a
  host connects to run `cat /etc/os-release || uname -a`
- useServerStats polls `conn.exec(statsCommand)` every 5 seconds

Both commands fail on non-POSIX CLIs, but the channels still hit AAA.

This change avoids both by reading the SSH server identification
string that ssh2 already captures during the handshake
(`conn._remoteVer`). No extra network round-trips, zero additional
AAA entries.

## Changes

**sshBridge.cjs**
- Store `conn._remoteVer` on the session object at connect time as
  `session.remoteSshVersion`
- New IPC handler `netcatty:ssh:remoteInfo` (`getSessionRemoteInfo`)
  returning the captured SSH server software string

**preload.cjs / global.d.ts / useTerminalBackend.ts**
- Thread `getSessionRemoteInfo(sessionId)` through to the renderer

**domain/host.ts**
- `NETWORK_DEVICE_OPTIONS` constant listing the vendor IDs we can
  recognize (cisco, juniper, huawei, hpe, mikrotik, fortinet,
  paloalto, zyxel)
- `detectVendorFromSshVersion()` — pure function that parses an SSH
  server software string and returns a vendor ID or ''. Pattern set
  is sourced from Nmap nmap-service-probes (authoritative), the
  ssh-audit software.py reference, and vendor docs; see code
  comments for the exact matches used.
- `classifyDistroId()` returns `linux-like | network-device | other`
  so features that require a POSIX shell can gate on the result.

**createTerminalSessionStarters.ts (runDistroDetection)**
- Before running the /etc/os-release probe, call
  `getSessionRemoteInfo` on the already-connected session and feed
  the banner into `detectVendorFromSshVersion`. If the vendor maps
  to a known network device, emit the vendor ID via the existing
  `onOsDetected` callback and skip the shell probe entirely. For
  unknown or generic OpenSSH/Dropbear banners the existing behavior
  is preserved.

**Terminal.tsx**
- `isSupportedOs` now derives from `classifyDistroId(effectiveDistro)`
  combined with `host.deviceType !== 'network'`, so neither explicit
  network-device hosts nor banner-detected ones trigger the stats
  polling loop.

**useServerStats.ts**
- Add a consecutive-failure counter. After 3 consecutive failed
  polls, stop the interval for this session (reset on disconnect /
  sessionId change / settings toggle). This is the fallback for
  hosts the banner classifier cannot identify (Juniper JUNOS,
  Cisco NX-OS, Arista EOS — all present as plain `OpenSSH_*` but
  do not support the POSIX stats pipeline).

**DistroAvatar.tsx / HostDetailsPanel.tsx**
- Add 8 network-device vendor icons (Cisco, Juniper, Huawei, HPE,
  MikroTik, Fortinet, Palo Alto, ZyXEL) alongside the existing
  Linux distro icons, with brand colors. Icons sourced from Simple
  Icons (CC0) where available; HPE and ZyXEL use simple
  abbreviation placeholders.
- Network device vendors are added to the manual distro override
  dropdown so users can pin an icon even if their device has an
  exotic banner we don't auto-detect.

**i18n**
- English + Chinese labels for the new vendor options in the
  Host Details distro selector.

Closes #674

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: gate network-device detection on raw host.distro, not manual icon override

Per Codex review on PR #680: the stats-polling gate was passing
`host` through getEffectiveHostDistro() before classifying, which
honors the manual distro override (`distroMode: 'manual'` +
`manualDistro`). That meant a user who previously pinned an
"ubuntu" icon on a host that later gets banner-detected as Cisco
would still be classified as linux-like and keep generating the
AAA session flood #674 is meant to eliminate.

Separate display from gating:
- Display (DistroAvatar, host cards): keeps using
  getEffectiveHostDistro so users can cosmetically override the
  icon.
- Gating (useServerStats via Terminal.tsx isSupportedOs): reads
  host.distro directly — the value populated by banner detection —
  alongside the explicit host.deviceType flag. Manual icon choice
  can no longer re-enable polling on a detected network device.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: guard distro detection against stale session timers

Per Codex review on PR #680: runDistroDetection is scheduled on a
600ms setTimeout after connection and also makes async calls of its
own. A quick disconnect + reconnect on the same session slot could
fire the old timer against the new session, reading host B's SSH
banner via getSessionRemoteInfo and writing host B's vendor onto
host A's distro field — wrong icon and wrong stats-polling state.

Follow the same pattern already used for the startup-command timer
in this file (scheduledSessionId captured at schedule time, checked
inside the timer). Capture `id` at schedule time, bail out if
ctx.sessionRef.current no longer matches, and re-check after every
async await inside runDistroDetection so that a reconnect during
the banner fetch or the os-release probe also bails cleanly.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address local codex review on PR #680

Addresses three issues found in a local Codex review pass after the
remote reviewer gate was flaky:

## P0 — session tokens instead of sessionId for stale-timer guard

The previous guard captured `id` returned from startSSHSession and
compared against `ctx.sessionRef.current` inside the setTimeout and
the async runDistroDetection. But the renderer passes
`sessionId: ctx.sessionId` into startSSHSession (see
createTerminalSessionStarters.ts:543), meaning a tab reuses the
SAME sessionId across disconnect+reconnect. The comparison
`T1 === T1` always passed, so the guard was a no-op.

Replaced with a module-level Map<sessionId, object> that stores the
live "connection token" for each sessionId slot. Each call to
startSSH mints a fresh `{}` token and overwrites the entry. Timers
and async continuations compare their captured token against the
current map value by reference — a reconnect replaces the map entry
with a new token, so stale callbacks bail cleanly.

## P1 — run os-release probe on the existing SSH connection

The fallback /etc/os-release probe used `execCommand` which creates
a brand-new SSHClient() on every call. On network devices that
present as plain `OpenSSH_*` and fall through to this step
(JUNOS, NX-OS, EOS) it added one extra full-auth AAA session log
entry per connect, in addition to the failing stats polls.

Added `getSessionDistroInfo(sessionId)` as a new IPC handler that
runs the same probe via `session.conn.exec()` — an exec channel on
the already-open connection, no new handshake. Plumbed through
preload.cjs, global.d.ts, and useTerminalBackend.ts.
runDistroDetection uses this instead of execCommand in the fallback
path, also removing the unused auth-credentials argument (we are no
longer opening a new connection, so no credentials are needed).

## P2.1 — don't re-arm timers after giving up

After the consecutive-failure counter trips, useServerStats cleared
the interval but a subsequent effect rerun (visibility change,
settings tweak, etc.) would schedule a fresh `setTimeout` and
`setInterval` that would just call the early-return path forever.

The scheduling block now checks `givenUpRef.current` before arming
either timer. The flag is still cleared on the normal disconnect /
sessionId-change reset path so a reconnect gets a fresh attempt.

## P2.2 — drop the ambiguous IPSSH-* → cisco mapping

Nmap's `match ssh m|^SSH-([\d.]+)-IPSSH-` line is labelled as
`Cisco/3com IPSSHd` — it cannot identify a specific vendor from the
banner alone. Mapping it to `cisco` would risk showing the wrong
vendor icon on a 3Com device. Removed the rule entirely and
documented why with a code comment; users with such devices can
still use the Host Details manual distro override.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address remaining gaps from local codex follow-up review

P0 gap — delete connection token on session exit. Previously the map
entry lingered after disconnect, so a very late-firing timer could
still pass the isConnectionTokenCurrent check even though the session
no longer existed. Functionally harmless (the IPC calls would fail)
but semantically wrong. Now connectionTokensBySessionId.delete() is
called in the onSessionExit handler.

P1 new — exec channel leak on timeout in getSessionDistroInfo. The
timeout branch resolved the promise but didn't close the stream, so
a hanging remote command would leave the exec channel open until the
SSH connection itself dropped. Added a settled guard (resolve-once)
and stream.close() on timeout.

P2.1 gap — givenUpRef not reset on sessionId change. The failure
counter reset only happened in the !isConnected branch of the main
effect, so a sessionId swap while still connected (rare, but
possible if the tab reconnects without toggling connected state)
would permanently suppress polling. Added a small dedicated effect
that resets both counters when sessionId changes.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-10 14:02:24 +08:00
陈大猫andClaude Opus 4.6 60071424d0 fix: prevent crash when clicking external links with no default browser (#676)
* fix: prevent crash when clicking external links with no default browser (#663)

On systems like Tiny11 where no default browser is associated with
http/https URLs, shell.openExternal() rejects with Windows error 0x483
("No application is associated..."). The main process treated that
rejection as an unhandledRejection, which the global handler re-throws
as fatal, crashing the entire app.

Root cause: windowManager.cjs used `void shell?.openExternal?.(url)`
inside a try/catch, assuming the try would cover the call. `void` only
discards the returned Promise — it does not catch async rejections,
so when openExternal rejected, the error escaped as a floating
unhandledRejection.

The IPC handler in main.cjs (`netcatty:openExternal`) also awaited
shell.openExternal() without any try/catch. Electron's ipcMain.handle
forwards rejections to the renderer over IPC, but the renderer-side
fallback called `window.open()`, which re-entered the same buggy
windowManager path — and that is where the process actually died.

Changes:
- windowManager.cjs: attach an explicit `.catch` on the openExternal
  Promise in both createExternalOnlyWindowOpenHandler and
  createAppWindowOpenHandler so rejections cannot propagate.
- main.cjs: wrap the IPC handler in try/catch and return a structured
  { success, error } result instead of throwing. This lets the
  renderer render an informative message.
- global.d.ts: update the openExternal return type to match.
- useApplicationBackend.ts: read the structured result and throw on
  failure so callers can react; drop the now-redundant window.open()
  fallback for the Electron branch (kept only for non-Electron envs).
- SettingsApplicationTab.tsx: show a friendly toast ("No default
  browser configured — please set one in system settings") when
  openExternal fails, instead of the previous silent failure.
- i18n: add en + zh-CN strings for the toast.

Closes #663

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* feat: fall back to in-app browser window when system has no default browser

Instead of showing a toast when shell.openExternal() fails (e.g. Tiny11
with no default browser), open the URL in a minimal in-app BrowserWindow
so users can still read the linked page.

windowManager.cjs now exposes:
- openFallbackBrowser(url, opts): creates a stripped-down BrowserWindow
  that loads the URL. No preload script (remote content must never
  touch contextBridge), contextIsolation/nodeIntegration/sandbox all
  set to safe defaults, and an isolated persist:netcatty-fallback-browser
  session so cookies and storage do not leak into the main app.
  Basic Alt+Left / Alt+Right / Ctrl-or-Cmd+R shortcuts for navigation
  and reload.
- tryOpenExternalWithFallback(shell, url, opts): tries
  shell.openExternal first; on rejection, falls back to
  openFallbackBrowser. Returns { success, fallback?: "in-app-browser" }.

All three external-URL call paths now route through this helper:
- main.cjs netcatty:openExternal IPC handler
- createExternalOnlyWindowOpenHandler (popup blocker for child windows)
- createAppWindowOpenHandler (main/settings window window-open handler)

The renderer-side toast is retained as a last-resort for the rare case
that both system and in-app browsers fail (e.g. BrowserWindow creation
error). Copy updated to reflect the new behavior.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: preserve rejection semantics for failed external opens

Per Codex review on PR #676: returning { success, error } from
bridge.openExternal changed the contract from "reject on failure" to
"resolve with a failure object on failure", which silently broke
callers that rely on rejection to abort flows.

useCloudSync's OAuth path is the clearest example: it wraps
bridge.openExternal in a try/catch and rejects browserPromise inside
the catch. With the resolved-failure contract, that catch never fires,
so Promise.race([callbackPromise, browserPromise]) can hang
indefinitely when no browser is available.

Revert the contract:
- tryOpenExternalWithFallback resolves void on success (system browser
  or in-app fallback) and throws on total failure
- main.cjs IPC handler awaits and lets rejections propagate
- global.d.ts openExternal is Promise<void> again
- useApplicationBackend just awaits — rejections propagate naturally
- SettingsApplicationTab's existing try/catch + toast continues to
  work as before

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: propagate fallback browser loadURL failures

Per Codex P2: openFallbackBrowser swallowed loadURL rejections by
attaching a .catch that only logged, so any caller using
tryOpenExternalWithFallback as a success signal saw an opened window
as success even when the page failed to load. OAuth flows would then
wait for the downstream callback timeout instead of canceling early
on malformed or unreachable URLs.

openFallbackBrowser now returns { window, loaded } where `loaded` is
the raw loadURL Promise, and tryOpenExternalWithFallback awaits it in
the fallback path. On initial load failure, the broken window is
closed and the original shell.openExternal error is re-thrown.

The internal popup handler inside the fallback window keeps its
fire-and-forget behavior (it must return synchronously) but now
explicitly catches the loaded rejection to avoid unhandledRejection.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-10 10:39:37 +08:00
陈大猫andClaude Opus 4.6 80fbf0da2f feat: add data-section hooks for Custom CSS targeting (#642) (#655)
Custom CSS already exists in Settings → Appearance, but major UI
components use only Tailwind utility classes, making it hard for
users to reliably target regions in their custom styles.

This adds stable `data-section="..."` attributes on the root element
of the most commonly customized UI regions so users can write selectors
like `[data-section="snippets-panel"] { font-size: 14px !important; }`
without depending on implementation details.

Instrumented regions:
- snippets-panel (ScriptsSidePanel)
- host-details-panel (HostDetailsPanel via AsidePanel dataSection prop)
- group-details-panel (GroupDetailsPanel)
- serial-host-details-panel (SerialHostDetailsPanel)
- ai-chat-panel (AIChatSidePanel)
- vault-view / vault-sidebar / vault-main / vault-hosts-header / vault-host-list (VaultView)
- terminal-workspace / terminal-workspace-sidebar (TerminalLayer)
- top-tabs (TopTabs — also keeps existing data-top-tabs-root)

Also updated the Custom CSS description and placeholder in both
English and Chinese to list available hooks and show a working
example (snippet panel font-size override).

Closes #642

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-09 01:38:50 +08:00
陈大猫andClaude Opus 4.6 24df4b6548 fix: support CSV password import and save password in keyboard-interactive auth (#629)
* fix: support CSV password import and save password in keyboard-interactive auth (#627)

- Add Password column support to CSV import/export/template
- Add isAPasswordPrompt detection (prompt contains "password" + echo=false)
- Auto-fill saved password in keyboard-interactive modal
- Add "Save password" checkbox for password prompts in keyboard-interactive modal
- Wire save callback through sessionId → host to persist password

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address review feedback for keyboard-interactive and CSV changes

- Merge password field in dedupeHosts to avoid losing passwords from duplicate CSV rows
- Extract isAPasswordPrompt to module-level pure function
- Only render save-password checkbox at the first password prompt index
- Clean up orphaned i18n keys (useSaved, useSavedPassword, fill, fillSaved)

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: preserve whitespace in CSV imported passwords

Passwords may intentionally contain leading/trailing whitespace.
Removing .trim() ensures lossless CSV round-trip and correct auth.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: exclude OTP prompts from password detection and guard jump host save

- Add negative patterns (one-time, otp, verification, token, code) to
  isAPasswordPrompt to avoid auto-filling SSH password into OTP fields
- Only save password when request hostname matches session hostname,
  preventing jump host passwords from overwriting the destination host

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: skip formula injection guard for password column in CSV export

Password values starting with =, +, -, @ were getting a ' prefix from
the CSV formula injection protection, breaking round-trip fidelity.
Now password column is escaped for CSV syntax only, preserving the
credential verbatim.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: only skip formula guard for data rows, not header row

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-05 14:39:39 +08:00
陈大猫andClaude Opus 4.6 844c55e99d fix: sync built-in editor theme with terminal theme in immersive mode (#623) (#624)
The Monaco editor only synced background color from CSS variables and missed
foreground, cursor, selection, line numbers, and widget colors. Additionally,
switching between terminal themes of the same type (e.g. two dark themes)
did not trigger an editor theme update because the MutationObserver only
watched class/style attributes on <html>.

- Read 6 CSS variables (bg, fg, primary, card, muted-fg, border) and map
  them to 14 Monaco theme color tokens
- Set data-immersive-theme attribute on <html> when immersive mode applies
  a theme, so the MutationObserver detects same-type theme switches
- Clean up the data attribute when immersive mode is removed

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-03 18:03:40 +08:00
Eric Chan f284fb0505 Refine host group drop feedback (#617) 2026-04-03 12:15:07 +08:00
bincxzandClaude Opus 4.6 d2fe0ecefe feat: replace inline custom shell input with modal dialog
When selecting "Custom..." from the shell dropdown, opens a modal with:
- Full-width input field for shell executable path
- Path validation feedback (valid/not found/is directory)
- Quick-pick buttons for common shell paths
- Confirm/Cancel buttons

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-02 14:33:44 +08:00
bincxzandClaude Opus 4.6 1cccbfe5fb fix: update renderer description text from Canvas to DOM
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-02 11:39:13 +08:00
bincxzandClaude Opus 4.6 1c5960a054 feat: add font weight slider to terminal theme side panel
- Add range slider (100-900) in the Font tab of ThemeSidePanel
- Wire through TerminalLayer → App.tsx → useSettingsState
- Changes persist immediately via updateTerminalSetting('fontWeight')
- Display current weight value in status bar

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-02 11:13:37 +08:00
陈大猫 6ac36be04b feat: local shell selection with auto-discovery (#605) 2026-04-02 08:59:49 +08:00
陈大猫andClaude Opus 4.6 8ed1588fdb feat: add per-host option for Backspace sends ^H (#604)
* feat: add per-host option for Backspace sends ^H (#602)

Add backspaceSendsCtrlH option at host and group level to send ^H (0x08)
instead of DEL (0x7F) when pressing Backspace, for legacy system compatibility.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* feat: add per-host backspace behavior option (#602)

Add backspaceBehavior option at host and group level. When not configured,
xterm default behavior is preserved with zero interception. When set to
'ctrl-h', remaps DEL (0x7F) → ^H (0x08) for legacy system compatibility.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: use remapped backspace byte for broadcast input

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-01 23:39:04 +08:00
陈大猫andClaude Opus 4.6 762255443b fix: deduplicate font list when local fonts overlap with built-in fonts (#586) (#603)
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-01 23:10:43 +08:00
陈大猫andClaude Opus 4.6 be80741314 feat: custom keywords and colors in keyword highlighting (#597)
* feat: support custom keywords and colors in global keyword highlighting (#590)

Add ability to create custom keyword highlight rules in global settings
(Settings > Terminal > Keyword Highlighting):

- Per-rule enable/disable toggle for both built-in and custom rules
- Add custom rules with label, regex pattern, and color picker
- Delete custom rules (built-in rules cannot be deleted)
- Pattern validation with error feedback
- Custom rules sync across devices via cloud sync
- i18n support (en, zh-CN)

Built-in categories (Error, Warning, OK, Info, Debug, URL/IP/MAC) are
preserved and cannot be deleted, only toggled and recolored.

Closes #590

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* refactor: use dialog modal for adding custom keyword highlight rules

Replace inline form with a proper modal dialog:
- Button opens dialog instead of showing inline inputs
- Dialog has label+color, regex pattern, and live preview
- Reset and Add buttons side by side in footer area
- Add common.add i18n key (en, zh-CN)

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* ui: unify button styles in keyword highlight section

Both buttons now use ghost variant with equal flex-1 width for a
cleaner, balanced layout.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* ui: fix keyword highlight rule list alignment

- Add placeholder spacer (w-5) for built-in rules to match delete
  button width on custom rules, keeping color pickers aligned
- Move regex pattern to second line for custom rules
- Use block+truncate for label and pattern text

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* ui: hide regex, show edit/delete icons after label for custom rules

- Remove regex pattern display from rule list
- Add pencil (edit) and trash (delete) icons after custom rule label,
  visible on hover
- Edit opens the same dialog pre-filled with rule data
- Dialog supports both add and edit modes with appropriate titles/buttons

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* ui: remove toggle dots, simplify edit/delete to plain icons

- Remove the red enable/disable dot button from all rules
- Replace Button wrappers with plain Lucide icons for edit/delete
  (no hover background, just cursor pointer)

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: preserve multi-pattern rules on edit, keep disabled state on reset

- Editing a custom rule now preserves patterns beyond the first one
- Reset to default colors no longer force-enables disabled rules

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: replace all patterns on edit instead of preserving hidden ones

When editing a custom rule, save only the single user-visible pattern
rather than silently keeping extra patterns the user cannot see.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: preserve regex whitespace and multi-pattern rules on edit

- Stop trimming regex patterns on save (only trim for empty check)
- If pattern field unchanged during edit, preserve all original
  patterns so changing just label/color doesn't drop extra regexes

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: preserve additional patterns when editing custom rule

When editing, replace only the first pattern (the one shown in the
dialog) and keep any additional patterns intact to prevent data loss
for multi-pattern rules from sync or import.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-01 15:05:18 +08:00
bincxzandClaude Opus 4.6 7efb6d2adb fix: remove remaining isImmersive reference in useImmersiveMode
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-01 13:57:30 +08:00
bincxzandClaude Opus 4.6 33f8221d5c refactor: remove immersive mode toggle remnants — always enabled
Immersive mode was already hardcoded to true with a no-op setter.
Clean up all dead code:
- Remove isImmersive param from useImmersiveMode hook
- Remove immersiveMode/setImmersiveMode from useSettingsState
- Remove toggle from SettingsPage and SettingsAppearanceTab
- Remove sync read/write of immersiveMode setting
- Remove i18n keys for the removed toggle
- Simplify App.tsx conditionals

Kept: useImmersiveMode hook (core logic), CSS classes (fade overlay),
sync type field (backward compat), storage key.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-01 13:49:03 +08:00
陈大猫andClaude Opus 4.6 2f314c3588 feat: group configuration inheritance (#220) (#593)
* feat(i18n): add translations for group config panel

* feat(models): add GroupConfig data model, resolution logic, and encryption

Add the GroupConfig interface for group-level default settings that hosts
inherit. Includes ancestor-chain resolution (A/B/C merges from A, A/B,
A/B/C), host-level application logic, storage key, and secure field
encryption/decryption for sensitive GroupConfig fields.

Part of #220.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* feat(state): add groupConfigs state management with encryption

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* feat(ui): create GroupDetailsPanel with full config editing

Side panel for editing group-level default configuration using AsidePanel.
Includes General, SSH, Telnet, Advanced, Mosh, and Appearance sections
with sub-panel navigation for Proxy, Chain, EnvVars, and Theme selection.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* feat(vault): wire GroupDetailsPanel, replace rename dialog with full config panel

Replace all group rename dialog triggers with the new GroupDetailsPanel sidebar.
The hover edit button, context menu, and tree view edit callbacks now open the
full group configuration panel instead of a simple rename dialog.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* feat(connect): apply group config defaults at connection time

When connecting to a host, merge group-level default configuration so
hosts inherit their group's settings for auth, protocol, appearance,
and other inheritable fields. Connection logs still reference the
original host's label/hostname.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* feat(sync): include groupConfigs in sync and export payloads

Add groupConfigs to SyncPayload, SyncableVaultData, buildSyncPayload,
and applySyncPayload so group connection defaults are preserved during
cloud sync and data import/export. Also wire groupConfigs into the
vault object in SettingsPage so it flows through to the sync payload
builder.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

* feat(vault): update group configs on move and delete

* feat(host-panel): show inherited group defaults as placeholders

When editing a host that belongs to a group with configuration, group
default values now appear as placeholder text in username, startup
command, and charset fields where the host doesn't have its own value.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: clean up unused imports in GroupDetailsPanel

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* feat(group-panel): add/remove protocol sections, editable parent group

- SSH and Telnet sections are now add/remove — click "Add Protocol"
  to enable, "..." menu to remove. Only enabled protocols override hosts.
- Parent Group is now editable via Combobox dropdown for quick
  group moving.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: move SSH-specific fields into SSH protocol section

Startup Command, Legacy Algorithms, Proxy, Host Chaining,
Environment Variables, and Mosh are all SSH-specific and now only
visible when SSH protocol is added. Only Charset remains as a
shared field in the Advanced section.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: hide charset and appearance when no protocol is added

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: close Add Protocol dropdown after selection

Use controlled open state to explicitly close the dropdown when a
protocol is selected, preventing residual content from overlapping
the newly rendered section.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: apply group defaults in TerminalLayer sessionHostsMap

Terminal component was re-reading the original host from the hosts
array by hostId, bypassing the group defaults applied in
handleConnectToHost. Now sessionHostsMap applies resolveGroupDefaults
+ applyGroupDefaults when building the host object for each session,
so Terminal sees the merged credentials/settings.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: move Add Protocol to bottom, fix i18n for protocol/font labels

- Add Protocol button moved below Appearance section
- Added i18n keys: addProtocol, removeProtocol, fontFamily, fontSize
- All hardcoded English strings replaced with t() calls

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: replace font family text input with TerminalFontSelect dropdown

Use the same font selector component as settings, showing available
terminal fonts with preview. Includes "Use Global" reset button.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* feat(group-panel): match HostDetailsPanel key/certificate selection pattern

Replace the simple Combobox key selector with the same credential selection
flow used in HostDetailsPanel: a popover with Key/Certificate options,
inline combobox per type, and proper badge display with certificate icon.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* feat(group-panel): add Local Key File option to credential selection

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

* feat(group-panel): add identityFilePaths to GroupConfig and Local Key File option

- Added identityFilePaths to GroupConfig interface and INHERITABLE_KEYS
- GroupDetailsPanel now supports Key, Certificate, and Local Key File
  credential selection, matching HostDetailsPanel's full credential flow

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: prevent local key file input from overflowing panel width

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: constrain local key file input width with w-0 flex-1

Native input elements have a large default min-width. Using w-0 with
flex-1 forces the input to shrink within the flex container.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: add overflow-hidden to SSH Card to contain local key file input

Matches HostDetailsPanel's Card which uses overflow-hidden on the
credentials section to prevent long file paths from overflowing.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: add min-w-0 to key file path row for proper text truncation

Flex children need min-w-0 for truncate to work correctly,
otherwise the text pushes the container wider.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: force key file path text truncation with inline max-width calc

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: use fixed 320px max-width on key file path text to force truncation

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: add overflow-hidden to AsidePanelContent to prevent content overflow

The root cause was the inner div of AsidePanelContent only had
overflow-x-hidden which was being overridden by ScrollArea's viewport.
Changed to full overflow-hidden with w-full box-border.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: override Radix ScrollArea viewport's display:table in AsidePanel

Radix ScrollArea Viewport wraps content in a div with
display:table and min-width:100%, causing content to expand beyond
the panel width. Override this on AsidePanelContent's ScrollArea
to use display:block and min-width:0 instead.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: critical issues — seed new hosts from group defaults, validate group names, fix empty import

- HostDetailsPanel: When groupDefaults has values for port/username/charset,
  new hosts start with undefined/empty so group defaults take effect via
  applyGroupDefaults() instead of being blocked by hardcoded values
- GroupDetailsPanel: Validate group name in handleSubmit to reject '/' and
  '\' characters, matching the old rename dialog behavior, with visual error
- useVaultState: Check groupConfigs !== undefined instead of truthy so that
  importing an empty array [] properly clears all group configs

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: safe prefix replacement, remove dead code, extract shared resolveEffectiveHost

- Replace all .replace(oldPath, newPath) / .replace(sourcePath, newPath) with
  explicit prefix slicing (newPath + str.slice(oldPath.length)) in handleSaveGroupConfig
  and moveGroup for more robust path renaming
- Remove dead c.path === oldPath branch in finalConfigs mapping since updatedConfigs
  already contains the config with newPath
- Extract resolveEffectiveHost helper in App.tsx to deduplicate group defaults
  resolution in _handleTrayPanelConnect and handleConnectToHost

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: preserve undefined port on save when group has port default

form.port || 22 was forcing port to 22 even when intentionally left
undefined for group inheritance. Now uses nullish coalescing and only
defaults to 22 when no group port default exists.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: SSH-adjacent field detection, chain host defaults, telnet inheritance, theme clear

- hasSshFields() now checks proxyConfig, hostChain, startupCommand,
  legacyAlgorithms, environmentVariables, moshEnabled, moshServerPath,
  and identityFilePaths so the SSH section auto-opens when editing
- Chain hosts in sessionChainHostsMap now get group defaults applied
  via resolveGroupDefaults + applyGroupDefaults
- Added telnetEnabled to GroupConfig interface and INHERITABLE_KEYS;
  save handler sets telnetEnabled: true when Telnet section is on
- Theme/font "Use global" clear now sets override to false instead of
  undefined, preventing parent group theme from leaking through

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: review round 4 — sync, SFTP, port forwarding, type safety, UX

- Scan groupConfigs in encrypted credential guard (P1 security)
- Add groupConfigs to auto-sync payload and three-way merge (P1 sync)
- Apply group defaults in SFTP connections (P1 SFTP)
- Apply group defaults in all port forwarding paths (P1 port forwarding)
- Make Host.port optional to fix unsafe type cast (P1 type safety)
- Fix port input empty → 0 instead of undefined (P2)
- Add port placeholder showing inherited value (P2)
- Mutual exclusion of group/host detail panels (P2)
- Fix sub-panel width jump 420px → 380px (P2)
- Validate duplicate group path on rename/reparent (P2)

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: review round 5 — null guard, empty array inheritance, memo comparator, form reset

- Guard groupConfigs import against null payload (P1 crash)
- Validate duplicate path on moveGroup drag-drop (P2 data corruption)
- Clear empty environmentVariables to undefined for group inheritance (P1)
- Clear empty hostChain to undefined for group inheritance (P2)
- Add groupConfigs to SftpView memo comparator (P1 stale defaults)
- Add key={editingGroupPath} to GroupDetailsPanel for form reset (P1)

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: review round 6 — copy credentials, protocol dialog use effective host

- Apply group defaults in handleCopyCredentials (P2)
- Apply group defaults in hasMultipleProtocols check (P2)
- Pass effective host to ProtocolSelectDialog (P2)

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: serialize protocol:'ssh' marker to persist SSH section in group config

- Add protocol:'ssh' as marker field in handleSubmit SSH block
- Detect protocol:'ssh' in hasSshFields() to preserve section on reopen
- Clean up protocol field in removeSsh()

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-04-01 12:40:40 +08:00
陈大猫andClaude Opus 4.6 c7ae51b952 feat: host/group management improvements (#506) (#589)
* feat(models): add pinned and lastConnectedAt fields to Host

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

* feat(i18n): add translations for pinned and recently connected sections

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

* feat(vault): add pin toggle, lastConnectedAt tracking, and computed sections

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* feat(vault): render Pinned and Recently Connected sections at root level

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* feat(vault): add pin/unpin context menus and hover edit buttons in all views

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* feat(vault): make breadcrumb a drop target for moving groups back to root

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

* feat(settings): add toggle for showing recently connected hosts section

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

* fix: resolve lint warnings for unused vars and unnecessary dependency

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: improve pin performance and add pop-in animation

- Use ref for hosts in callbacks to avoid stale closures and
  unnecessary re-renders when hosts array changes
- Add pop-in spring animation on pinned host cards with staggered
  delay for a satisfying visual effect

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: fix pop-in animation visibility and improve pin responsiveness

- Move @keyframes pop-in out of @layer base to global scope so inline
  styles can reference it
- Add translateY to animation for a bouncier, more satisfying feel
- Use pinnedAnimKey to force card remount on pin changes so animation
  replays each time
- Wrap onUpdateHosts in startTransition for non-blocking pin updates

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: only animate newly pinned card, increase section spacing

- Track lastPinnedId instead of global animKey so only the newly pinned
  card gets the pop-in animation, not all existing pinned cards
- Clear animation state via onAnimationEnd for clean re-trigger
- Add mb-4 to Pinned and Recent sections for better visual separation

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* feat(vault): show pin indicator icon on pinned host cards

Small semi-transparent pin icon in top-right corner of pinned host
cards in the Hosts section (grid view only).

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* style: use solid amber/yellow pin indicator icon

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* style: tilt pin indicator icon 45 degrees

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* style: replace pin indicator with filled amber star on all pinned cards

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: move lastConnectedAt tracking to App-level handleConnectToHost

Previously updating lastConnectedAt in VaultView's handleHostConnect
which could be lost during tab switches. Now tracked at the App level
where all connections are handled, ensuring the timestamp persists
regardless of UI navigation state.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address Codex review findings (P2 issues)

1. useStoredBoolean now syncs across same-window components via
   CustomEvent dispatch, so Settings toggle immediately updates VaultView
2. lastConnectedAt updated after connectToHost succeeds, not before
3. Pinned and Recently Connected sections now respect active search
   and tag filters

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address second round Codex review findings

1. Track lastConnectedAt on actual 'connected' status instead of
   session creation - handles via handleSessionStatusChange wrapper
2. Covers tray panel connections since all paths go through
   updateSessionStatus
3. Pinned/Recent cards now honor multi-select mode with checkbox
   UI instead of triggering connections

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address third round Codex review findings

1. [P1] Use hostsRef in handleSessionStatusChange to avoid
   overwriting concurrent host changes with stale snapshot
2. [P2] Exclude pinned/recent hosts from main host list at root
   level to prevent duplicate cards on screen
3. [P2] Remove Pin action from tree view context menu since tree
   view has no pinned ordering/indicator support

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: address fourth round Codex review findings

1. [P1] Remove leftover onToggleHostPinned references in HostTreeView
   root-level component that were missed in previous cleanup
2. [P2] Add draggable + onDragStart to pinned/recent host cards so
   drag-and-drop between groups still works
3. [P3] Fix grouped view header count to exclude hosts already shown
   in pinned/recent sections

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: use functional state update for lastConnectedAt, dedupe pinned from recent

1. [P2] Add updateHostLastConnected using setHosts(prev => ...) functional
   update pattern (same as updateHostDistro) to avoid overwriting concurrent
   host changes when multiple sessions connect simultaneously
2. [P3] Exclude pinned hosts from Recently Connected section to prevent
   duplicate cards between the two top sections

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

* fix: wire showRecentHosts into settings sync, clear pin on duplicate

1. [P2] Add showRecentHosts to SyncPayload settings so the preference
   survives cloud sync and settings export/import
2. [P2] Clear pinned and lastConnectedAt on duplicated hosts so copies
   don't inherit pin/recent status from the original

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-03-31 23:55:45 +08:00
bincxzandClaude Opus 4.6 2d8cea2e7d fix: remove stale immersive mode sync/rehydration handlers
Address Codex review: remove references to setImmersiveModeState
in rehydration, IPC sync, and cross-window storage handlers that
would throw after the state setter was removed.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-03-31 15:37:59 +08:00
bincxzandClaude Opus 4.6 b724cfc775 feat: enable immersive mode permanently and remove settings toggle
Immersive mode is now always on — the UI chrome automatically adapts
to match the active terminal theme. The toggle in Appearance settings
has been removed and the TerminalLayer preview logic simplified.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-03-31 15:29:12 +08:00
Eric Chan d9b51c3a50 feat: add GitHub Copilot CLI agent support 2026-03-30 15:53:08 +08:00
bincxzandClaude Opus 4.6 cca4a3a37e fix: clear other selections on file interaction, not tab switch
Move selection clearing from tab switch and pane focus handlers into
toggleSelection/rangeSelect. This means:
- Switching tabs just to look around preserves all selections
- Actually clicking/selecting files clears other tabs' selections

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-03-29 20:13:24 +08:00
bincxzandClaude Opus 4.6 75ec050c31 revert: restore clearSelectionsExcept to clear all tabs except target
Clearing same-side inactive tab selections on tab switch is intentional
UX — stale selections on hidden tabs would be confusing when switching
back. Reverts the "preserve same-side" change from 05c48b3.

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-03-29 20:04:08 +08:00
bincxzandClaude Opus 4.6 db604e4c41 fix: localize delete dialog labels and preserve moved tab tree selection
- Add i18n keys for "Host" and "Path" labels in delete confirmation
  dialog (was hardcoded English, broken under zh-CN)
- Pass moved tab ID as extra keepId when clearing tree selections after
  moveTabToOtherSide, since the ref still has pre-move state

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
2026-03-29 19:50:18 +08:00