Commit Graph
105 Commits
Author SHA1 Message Date
bincxz dc7477804f fix(ssh): confirm Copy Tab reuse after the source shell closes
#2923

Copy Tab pins the source transport across preflight. If that shell
closes before the queued channel opens, pendingShellReconnectRisk is
already recorded and TERM-SSHD marks the conn non-reusable for shells.
Decide liveness and allowShellReuse at channel-open time so a pinned
captured source cannot accept an immediately exiting session.
2026-08-17 18:22:35 +08:00
bincxz 6719e35909 fix(ssh): confirm reused shells after SFTP-held last close
#2923

Idle park is not the only last-shell state. An SFTP or forward lease
keeps the transport live and records pendingShellReconnectRisk; those
reconnects now run the same liveness settle. Known-bad banners also
refuse later shell reuse on that socket so start() dials fresh instead
of borrowing the dead session again.

Keep the liveness timer referenced so node --test cannot exit while
the settle is still pending.
2026-08-17 18:13:25 +08:00
bincxz be22711041 fix(ssh): do not idle-park TERM-SSHD transports
#2923

QiZhi TERM-SSHD accepts a new session channel on a parked connection
and immediately exits 0, so reconnect after close flashes the tab
shut. 1.1.80 skipped PID discovery on that path but still reused the
parked transport.

Known-bad banners now end the transport instead of parking. Idle-park
reconnects on unknown banners wait for the new shell to stay open; an
immediate exit discards the transport, denylists the endpoint, and
falls back to a fresh dial. Copy Tab and live multiplex are unchanged.
2026-08-17 18:01:10 +08:00
bincxz 0c433b5ff2 fix: track partial SSH drain progress 2026-08-14 11:07:17 +08:00
bincxz b308fd378b fix: bound idle SSH drain waits 2026-08-14 10:43:20 +08:00
bincxz 96ee77236e fix: keep slow SSH uploads draining 2026-08-14 10:36:09 +08:00
netcatty-bot 8e2363b9bc fix: address Codex review on PR #2968 2026-08-13 19:11:09 +00:00
netcatty-bot 1a609182a4 fix(#2967): automated Cursor CLI fix 2026-08-13 16:46:21 +00:00
bincxz 6f6d8dc36d fix(ssh): recover cwd safely after parked reconnect 2026-08-12 14:42:25 +08:00
netcatty-bot d0f819efb0 fix: address Codex review on PR #2917 2026-08-12 06:36:25 +00:00
bincxz 6bf4268e8e fix(ssh): scope parked reconnect cwd guard 2026-08-12 13:17:50 +08:00
bincxz f02b645af7 fix(ssh): avoid stale cwd after parked reconnect 2026-08-12 12:44:11 +08:00
netcatty-bot 42b174abb3 fix(#2923): automated Cursor CLI fix 2026-08-12 03:49:12 +00:00
Netcatty-Bot fd295e7529 fix(ssh): open Copy Tab shell before PID discovery on rate-limited bastions (#2808) 2026-08-09 21:16:45 +08:00
205d1591e8 feat(terminal): add disconnect/reconnect on workspace split status bar (#2769) (#2771)
* feat(terminal): add disconnect/reconnect controls on session status bar

Workspace panes could not reach tab-level reconnect. Expose disconnect
(without closing the pane) and reconnect beside the host info actions so
split sessions stay operable. Closes #2769.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): abort in-flight boot on status-bar disconnect

Disconnect keeps the pane mounted, so cancel's unmount cleanup never runs.
Flip isBootActiveRef (and isCancelling) so a late startSSH/startMosh attach
cannot resurrect the session after the user disconnects mid-connect.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): ignore stale start UI after status-bar disconnect

When disconnect aborts an in-flight connect, starter catch paths must not
reopen auth or repopulate errors. Gate SSH/telnet/mosh/ET/local/serial
failure UI on isTerminalBootActive and harden the boot effect awaits.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): hide disconnect/reconnect on compact popup terminals

Owned command popups use compactToolbar with a one-shot startup command.
Exposing reconnect there can re-run that command; keep the controls on
normal tabs/workspace panes only.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): use boot epoch so reconnect cannot revive aborted starts

Disconnect alone flipping isBootActiveRef is not enough: an immediate
reconnect re-arms boot, and a late startSSH from the aborted attempt can
still attach. Capture a boot epoch per attempt and ignore stale attaches/UI.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): do not let stale attach abort a newer reconnect

tryAttach failure for an expired boot epoch must close the orphan session
only. Calling abortSessionStartAfterUnmount() would force disconnected on
a reconnect that already re-armed boot.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): reject late host-key prompts after disconnect

Disconnect can land before pendingHostKeyRequestId is set. Auto-deny
onHostKeyVerification when boot is inactive or status is disconnected
so approval UI cannot reopen on an aborted pane.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): cancel wake and MFA when status-bar disconnects

Invalidate hibernation reconnect-wake tokens on disconnect so a late wake
cannot re-arm boot. Reject/cancel keyboard-interactive prompts for
disconnected panes and clear any already-queued MFA for that session.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): ignore stale SSH catch UI and password fallback

Check boot attempt currency before resetting reconnect UI state on
SSH start failure, and before launching key→password fallback after
disconnect so a replacement reconnect is not interrupted.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): guard stale SSH progress and host-key prompts

Ignore chain-progress callbacks from superseded boot attempts, and
thread bootEpoch through SSH host-key verification so a late prompt
from an aborted start cannot overwrite a replacement reconnect.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): correlate MFA and jump host-keys with boot epoch

Forward bootEpoch through jump-host verification and keyboard-interactive
prompts, and reject superseded MFA when the retained tab has already
started a replacement reconnect.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): keep replacement SSH session alive across stale starts

Skip closeSession for superseded starts while a newer boot still owns
the shared sessionId, and avoid clearing MFA wait state before the
attempt-freshness guard on SSH success.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): own shared sessionIds by boot epoch

Claim SSH/local registry slots with bootEpoch so a stale start cannot
overwrite a replacement, and make closeSession no-op when the payload
epoch does not match the live session owner.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): claim bootEpoch for all reconnectable backends

Pass bootEpoch through Telnet/Mosh/ET/serial starts, claim registry slots
the same way as SSH/local, and dispose displaced owners when a newer
boot replaces the shared sessionId.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): protect preload listeners and ET artifacts on displace

Defer epoch-scoped closeSession listener teardown until main confirms
ownership, and remove ET external-auth temp artifacts when a newer boot
displaces the previous registry owner.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): clean rejected Mosh starts and keep replacement listeners

Kill superseded Mosh/ET PTYs and auth temp files when claimSessionSlot
rejects, and never clear shared preload listeners on epoch-scoped closes.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): settle superseded boots and stop displaced log streams

Reject Telnet/SSH claim failures through Promise reject/failReuse instead of
uncaught EventEmitter/.then throws, and stop a displaced session's log stream
so a logging-disabled reconnect cannot append into the old file.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): keep woken runtime when disconnect cancels hibernate wake

Disconnect invalidates in-flight hibernated reconnects with keep mode so a
successful wake that already cleared hibernatedRef is not disposed into a
dead pane that can never reconnect. Unmount still disposes orphan runtimes.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): bind reused SSH shellPid only to the claimed session

Late PID discovery after Copy Tab reuse must not write onto a newer
bootEpoch that already replaced the shared sessionId registry slot.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): await plugin cancel cleanup and clear boot epochs on teardown

Track plugin start/cancel promises so Disconnect→Reconnect waits until the
external session finishes unregistering, and stop unmount teardown from
republishing boot epochs into the process-wide map.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): cancel SSH passphrase prompts on disconnect

Register a pending-boot AbortSignal for SSH starts, abort it (and session-
scoped passphrase requests) from closeSession even before a registry slot
exists, and filter/drop late passphrase modals by boot epoch / disconnect.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): close owned boot epoch and scope passphrase cancels

Capture the pre-bump epoch for disconnect/teardown closeSession so live
transports are not skipped by epoch mismatch, cancel only passphrase prompts
at or below that epoch, and revalidate boot currency after async passphrase
lookups before queuing a modal.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): tag Telnet auto-login and Mosh ready with bootEpoch

Emit bootEpoch on telnet auto-login and mosh:ready events so overlapping
Disconnect→Reconnect boots ignore cross-delivered callbacks meant for an
older shared sessionId.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): update disconnect assertion and cancel pending serial opens

Align the disconnect source regression with invalidateBootEpochForClose, and
abort in-flight serialPort.open attempts via pending boot AbortSignal so
Disconnect→Reconnect cannot leave a stale open racing the replacement.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): keep flow-pause leases on skipped epoch closes

Worker close:await previously cleared pause ownership in finally even when
the worker returned skipped for an epoch mismatch, dropping the live
replacement's lease. Only clear on non-skipped closes; epoch-scoped
fire-and-forget close similarly defers to onSessionClosed.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

---------

Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>
2026-08-06 15:47:20 +08:00
75452055ae fix(ssh): harden macOS Local Network TCC trigger (#2673) (#2766)
* fix(ssh): harden macOS Local Network TCC trigger for LAN SSH

Replace the main-process TCP probe with Apple's TN3179 UDP discard-port
connect, resolve vault hostnames/.local before probing, hold the socket
briefly so TCC can present the alert, and annotate EHOSTUNREACH errors
that embed LAN IPs even when the host was stored as a DNS name.

Addresses recurring #2673 / #2663 / #1040 Local Network silent failures.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(ssh): address Codex Local Network review findings

Clear the UDP connect safety timer once connected so a slow .local
resolve cannot truncate the TCC hold. Mark worker-forwarded start
payloads after the main-process probe so utilityProcess skips a second
hold. Keep the new test comments ASCII-only.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(ssh): bound Local Network DNS lookup by probe timeout

Codex noted that hostname resolution before the UDP probe had no
deadline, so a hung DNS lookup could stall every non-literal SSH start.
Race the lookup against the existing probe timeout and skip probing when
it expires so the normal SSH dial can proceed.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(ssh): tighten Local Network error address parsing

Ignore LAN bind addresses in Node's "- Local (ip:port)" suffix so public
SSH failures are not mislabeled as Local Network denials. Also extract
embedded IPv6 ULA/link-local remotes from unreachable errors.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(ssh): only hint Local Network when the first hop is LAN

A .local final host reached through a public proxy or jump must not force
the macOS Local Network hint when the failing dial never touched LAN.
Annotate from the first hop and remote error address instead.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(ssh): probe jump-level proxy as the first Local Network hop

Match sshBridge first-hop wiring: a usable jump.proxy overrides the
session proxy and the jump hostname. Otherwise a .local jump behind a
public proxy probes the wrong host, and a LAN proxy in front of a public
jump is missed.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(ssh): retry .local Local Network probes over udp6

IPv6-only mDNS hosts never resolve on a udp4 socket, so the TCC trigger
could miss them. For unresolved hostnames try udp4 then udp6.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(ssh): share Local Network probe timeout across UDP families

udp4 then udp6 fallbacks for .local hosts now inherit one overall
deadline instead of restarting DEFAULT_PROBE_TIMEOUT_MS per family.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* chore: re-request Codex review after unanswered pass

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(ssh): skip Local Network probe for ProxyCommand hops

Treat an active jump/session ProxyCommand as a terminal first hop so we
do not fall through to a LAN hostname and spuriously prompt. Also share
one wall-clock deadline across DNS resolution and UDP family attempts.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* test(ssh): tolerate residual Local Network probe budgets in hold test

Shared-deadline math can arm the safety timer at 499ms instead of exactly
500ms. Identify that timer by being larger than the hold, not by equality.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(macos): preserve ProxyCommand skip during Local Network error annotation

Keep ProxyCommand's skipProbe sentinel through annotateMacLocalNetworkErrorMessage
so .local hop names do not get a false Local Network hint when TCP probing was
intentionally skipped. Split residual UDP budget evenly across remaining address
families so dual-stack and .local IPv6 attempts still get time.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* test(ssh): fire residual Local Network safety timers in hang probe test

Shared-deadline math arms the UDP safety timer with a residual budget
(e.g. 2999ms) rather than the exact DEFAULT_PROBE_TIMEOUT_MS constant,
so matching only the constant left the hang-socket test unable to settle.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(macos): never hint Local Network for ProxyCommand errors

skipProbe means an external ProxyCommand owns the dial. Do not append the
Netcatty Local Network TCC hint from child-process LAN addresses in the
error text — that guidance would send users to enable Netcatty for a
connection Electron never made.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(macos): ignore downstream LAN addresses behind public first hops

When a public proxy/jump owns the first dial, unreachable addresses embedded
in the error often name a private host the remote side tried to reach. Only
use those addresses as Local Network evidence when they identify the local
first-hop dial.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(macos): keep LAN hints for private DNS first hops and ASCII comments

Treat common private DNS suffixes (e.g. bastion.lan) as Local Network
evidence so hostname-based first hops still get guidance when Node reports
the resolved IP. Replace em dashes and arrows in this module with ASCII.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(macos): keep Local Network hints for unqualified first hops

Single-label jump/proxy names such as "dev-viet" resolve to LAN IPs that
appear in Node unreachable errors. Treat those hostnames as local-side
evidence so annotation still guides users to macOS Local Network settings.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(macos): carry resolved first-hop LAN addresses into error annotation

ensureAccess remembers the LAN IP it probed for a hostname first hop and
forwards it on the worker start payload. Annotation uses that resolved
address so private split-DNS FQDNs like bastion.example.com still get
Local Network guidance without treating public proxies as LAN.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

---------

Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>
2026-08-06 15:02:54 +08:00
Cursor Agentand陈大猫 eee9be01f1 fix(ssh): retry rate-limited PID discovery for direct bastions
Shell-open retries already applied to every Copy Tab reuse, but resilient
PID scans were still gated on jumpHosts. Direct bastion targets that
rate-limit session channels could reuse the shell while leaving the
copied tab without shellPid. Always retry rate-limited discovery on the
reuse path; keep the optional pre-scan pause jump-host-only.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>
2026-08-04 13:41:39 +00:00
Cursor Agentand陈大猫 f59518a2ff fix(ssh): retry rate-limited pre-open shell PID discovery
If the jump-host Copy Tab pre-open PID scan is rejected with channelOpen
too offen, a single delayed attempt left discovery unavailable and skipped
post-open assignment. Retry rate-limited pre-open scans so shellPid
tracking still succeeds before opening the reused shell.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>
2026-08-04 13:25:29 +00:00
Cursor Agentand陈大猫 6acc2883fd fix(ssh): retry rate-limited post-open shell PID discovery
After a bastion-rate-limited shell open succeeds on Copy Tab, the follow-up
PID discovery exec can hit the same "channelOpen too offen" limit. Delay and
retry that discovery on jump-host reuse so the copied session still gets a
shellPid for unambiguous cwd lookup.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>
2026-08-04 13:20:49 +00:00
Cursor Agentand陈大猫 b7e8f9a04a fix(ssh): keep jump-host shell PID discovery with rate-limit backoff
Address review feedback: permanently skipping PID discovery on jump-host
Copy Tab left shared transports without shellPid and broke cwd lookup.
Delay discovery briefly instead, and keep shell-open retries for the
bastion "channelOpen too offen" rate limit.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>
2026-08-04 13:14:54 +00:00
Cursor Agentand陈大猫 93abe8446a fix(ssh): retry Copy Tab shell opens on bastion channel rate limits
Bastion/jump hosts often reject rapid session channel opens with
"channelOpen too offen". Copy Tab was opening a discovery exec then a
shell on the same authenticated transport, failing reuse and falling
back to a fresh login that prompts for OTP again.

Skip shell PID discovery when jump hosts are present, and retry shell
opens with short backoff on the bastion rate-limit error so duplicated
tabs keep reusing the live connection.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>
2026-08-04 13:09:15 +00:00
bincxz f200aafc8f fix(ssh): harden fresh automation reconnects 2026-08-04 12:26:28 +08:00
bincxz 9d876cf6d5 fix(ssh): use fresh connections for connect automation 2026-08-04 11:58:07 +08:00
bincxz 072bbf24ad fix: preserve standard agent authentication 2026-08-04 02:01:12 +08:00
bincxz 6e73cec109 fix: refresh forwarding agent selection 2026-08-04 01:32:03 +08:00
bincxz 74a23c335b fix: isolate login and forwarding agents 2026-08-04 01:18:38 +08:00
bincxz cb6c65fd37 fix: separate agent login from forwarding 2026-08-04 01:05:26 +08:00
bincxz 3b6ca6f803 fix: select usable macOS agent for forwarding 2026-08-04 00:55:00 +08:00
bincxz 406fe2135a fix(ssh): harden macOS Local Network probe for LAN SSH
Bound the main-process TCC probe to 3s, only treat real private IPv4/IPv6
literals as LAN, prefer proxy as first hop when set, and annotate
unreachability using either the target or the first hop. Closes the
remaining merge blockers for #2663.
2026-08-03 00:36:03 +08:00
netcatty-bot e8769cd590 fix(#2663): automated Cursor CLI fix 2026-08-02 06:14:24 +00:00
bincxz fe737ec555 fix(perf): unify SFTP lifecycles and bound runtime resources 2026-07-29 03:33:00 +08:00
bincxz 5328bba3b8 fix(ssh): fingerprint credential material for transport reuse invalidation
Digest password/privateKey/certificate/passphrase/identity paths into the
auth fingerprint so key or password rotation under the same keyId invalidates
parked transports. Secrets are not retained on the transport registry — only
the digest is indexed.
2026-07-28 18:57:15 +08:00
bincxz 20cfd39280 fix(ssh): require exact agentForwarding match for shell reuse
Shell and parked-shell lookup now use endpointAllowsReuse(..., "shell") so
disabling ForwardAgent cannot reattach to a warm conn that still exposes the
local agent. SFTP/port-forward keep asymmetric channel reuse so they can still
borrow a ForwardAgent-enabled terminal transport.
2026-07-28 18:57:14 +08:00
bincxz 9ecc9dbb04 fix(ssh): block transport reuse when agentForwarding is required
Store agentForwarding on the session/transport endpoint and apply an
asymmetric reuse check: opens that need ForwardAgent reject parked conns
that never enabled it, while SFTP/port-forward can still borrow a
ForwardAgent-enabled terminal transport.
2026-07-28 18:57:14 +08:00
bincxz aaf597eb64 fix(ssh): include auth policy in transport keys and migrate TTL
Fingerprint auth type, key id, MFA, agent, and host-key verification so
parked transports cannot bypass profile security edits. Migrate legacy
transfer-pool idle TTL into the SSH keep-alive setting on upgrade.
2026-07-28 18:57:14 +08:00
bincxz da54ff8ea3 fix(ssh): harden shared-transport routing and lifecycle
Include proxy/jump profile identity in transport keys, normalize loopback
remote-forward addresses, detach shared listeners on cancel, and avoid
MFA-retrying dedicated dials for local bind failures.
2026-07-28 18:57:14 +08:00
bincxz 0f01dbbf7d fix(ssh): address Codex review on transport reuse safety
Scope transport keys by vault hostId so different profiles cannot share
an authenticated connection. Fix createConnectionRef to preserve hostId.
Route remote-forward accepts by destPort/bind address, await unforwardIn
before success, return stopAllPortForwards as a promise, and update
async cancel tests.
2026-07-28 18:57:14 +08:00
bincxz 3f706abfeb feat(ssh): unify transport leases and converge transfer keep-alive
Introduce a main-process SSH transport registry (borrow/return leases,
ControlPersist-style idle park) shared by shell, SFTP, transfer, and
port-forward. Transfer pool becomes channel concurrency only; remove the
separate transfer-pool idle TTL UI in favor of a single SSH keep-alive
setting. Register dedicated SFTP dials, reuse parked transports, and fix
TTL 0 (park until quit), jump-host endpoint keys, and remote unforwardIn.
2026-07-28 18:57:14 +08:00
陈大猫andryan-wong-coder 67f8108713 feat(plugins): add reviewed privileged terminal data pipeline (#2402)
* feat(plugins): add privileged terminal data pipeline

* fix(plugins): harden terminal interceptor lifecycle

* fix(plugins): close terminal interceptor lifecycle gaps

* fix(plugins): preserve terminal interceptor state transitions

* fix(plugin): close terminal pipeline lifecycle gaps

* fix(plugin): harden terminal interceptor startup

* fix(plugin): isolate terminal output route attempts

* fix(plugin): isolate reused terminal sessions

* fix(plugin): harden terminal interceptor boundaries

* fix(plugin): harden terminal replay metadata

* fix(plugin): preserve terminal replay provenance

* fix(plugin): close terminal pipeline lifecycle races

* fix(plugin): harden terminal route handoff

* fix(plugin): contain terminal handoff failures

* fix(plugin): route terminal attachment through RPC

* fix(plugin): validate terminal attachment RPC

* fix(plugin): close unexpected runtime ports

* fix(plugin): canonicalize terminal data frames

* fix(plugin): close terminal pipeline lifecycle gaps

* fix(plugin): close terminal interceptor review gaps

* fix(plugin): harden terminal interceptor protocol handling

* fix(plugin): preserve terminal flow compatibility

* fix(plugin): preserve terminal protocol accounting

* fix(plugin): bound terminal interceptor lifecycle

* fix(plugin): close terminal interceptor review gaps

---------

Co-authored-by: ryan-wong-coder <wangsiyuan19990317@gmail.com>
2026-07-23 09:42:47 +08:00
f4bc94eadc fix(sftp): follow terminal cwd on macOS/BSD remotes and first open (#2388)
* fix(sftp): follow terminal cwd on macOS/BSD remotes and first open

The "follow terminal directory" probe read the interactive shell's cwd
only via /proc, which does not exist on macOS/BSD remotes, so
getSessionPwd fell back to the home directory (or failed) and the SFTP
panel never tracked the terminal. Add an lsof fallback (read_shell_cwd)
so the probe works on non-Linux remotes; Linux keeps using /proc.

Also fix the first open: while the panel is closed the per-command cwd
probe does not run, so activeTerminalCwd can be stale (login home) even
after the terminal cd-ed elsewhere. On that stale value the follow sync
saw currentPath === terminalCwd and did nothing, leaving the panel at
home. Force one fresh backend probe when the panel first becomes visible
for a connected remote, and re-sync on reopen.

Fixes #2335

Co-authored-by: Cursor Agent <cursor-agent@cursor.com>

* fix(sftp): keep first-open follow from snapping back to stale cwd

Addresses PR review: the first-open resync navigated to the freshly
probed terminal cwd but left the stale `activeTerminalCwd` cache (login
home) in place. Because the one-shot ref was already set, a later
dependency change that re-runs the normal follow sync (e.g. closing an
editor toggles hasActiveWork) would navigate the pane back to that stale
home. Mark the stale cached cwd as already handled before navigating so
the normal sync no-ops until the live cwd catches up;
invalidateInFlightFollowSync clears the guard once activeTerminalCwd
actually changes, letting follow resume.

Co-authored-by: Cursor Agent <cursor-agent@cursor.com>

* fix(sftp): re-check follow eligibility before first-open navigation

Addresses PR review: the first-open resync awaited a fresh terminal-cwd
probe but only re-validated the connection afterward. If the panel was
hidden or interactive work started (editor/dialog) while the probe was
in flight, it still navigated, moving the pane while the follow feature's
own visible/work guards say it should be paused.

Add a live followStillEligible() check (generation, follow enabled/
allowed, visible, no active work, same connection) that gates both the
post-probe continuation and the navigateTo call via shouldApply, matching
the normal follow path. Reset the one-shot guard when bailing mid-probe
so the resync can retry once follow is eligible again.

Co-authored-by: Cursor Agent <cursor-agent@cursor.com>

* test(host-details): align auth row assertion with unified row height

The HostDetailsSection row was unified to `flex h-12 ... px-3` (#2378)
but HostDetailsConnectionSections.test still expected the old
`min-h-12 ... px-3 py-2` class, failing lint-and-test on main. Update the
regex to match the shipped markup.

Co-authored-by: Cursor Agent <cursor-agent@cursor.com>

* fix(sftp): harden terminal cwd resync

---------

Co-authored-by: Cursor Agent <cursor-agent@cursor.com>
Co-authored-by: bincxz <16399091+binaricat@users.noreply.github.com>
2026-07-22 11:58:55 +08:00
陈大猫 f99efa8ac1 fix(ui): open AI silent sessions in an attach terminal popup (#2380)
* fix(ui): open AI silent sessions in an attach terminal popup

Tray jumps for hidden MCP sessions attach the existing terminal popup
to the live PTY instead of activating a tab-less main-window surface.
Output is rebound to the popup and restored when the popup closes.

* fix(terminal): register rebindOutput handlers under worker mode

Worker-enabled builds returned early from terminalBridge.registerHandlers
without registering rebind/restore IPC, so the first AI silent-session
attach popup always failed with "No handler registered". Register those
handlers in both paths and rebind display routing via terminalWorkerManager.

* fix(terminal): harden AI attach popup for worker mode lifecycle

Address codex review P1s: resume flow control before restoring output,
route exit/events to the rebound renderer, and replay home scrollback
via a snapshot request before rebinding display output.

* fix(terminal): restore attach routing on popup close and dual-notify exit

Hardening for AI observe popups: restore output from BrowserWindow closed
lifecycle (not only React cleanup), keep attach home for exit events so
main/tray lifecycle updates, and resume paused backend flow on attach.

* fix(terminal): resume flow on attach restore and close snapshot gaps

Resume backend output when attach popups are force-closed, fan out
lifecycle exit events to home+display in non-worker mode, and pause
during snapshot→rebind so live bytes are not dropped from the popup.

* fix(terminal): harden attach restore and worker lifecycle edges

Prefer live display for ZMODEM dialogs after rebind, dual-notify worker
crash exits to attach-home, and avoid clearing attach-home when restore
targets a dead renderer.

* fix(terminal): sync observe-popup state home and fan out SSH exits

Push popup serializations home before restore, fall back to hibernate
snapshots, settle briefly after pause for worker handoff, and dual-notify
SSH exits to attach-home owners in non-worker mode.

* fix(terminal): fan out exits for mosh/telnet/et attach owners

Use shared fanout for in-process protocol exits so attach-home and
display renderers both receive netcatty:exit under non-worker mode.

* fix(terminal): restore attach only onto main app windows

Avoid routing silent-session output to settings/prewarm windows when the
original home renderer is gone; fall back only to registered main windows.

* fix(terminal): harden silent session popup handoff

* fix(terminal): close observed popup with session

* fix(terminal): keep observe popup from reconnecting

* fix(terminal): preserve cleared observe snapshots

* fix(terminal): route transfer prompts to observer

* fix(terminal): keep context after observe restore
2026-07-22 08:58:58 +08:00
陈大猫 7488d290b2 fix(sftp): keep copied tab cwd distinct (#2356)
* fix(sftp): keep copied tab cwd distinct

* fix(sftp): serialize copied shell discovery

* fix(sftp): skip unavailable shell retries

* fix(sftp): handle source closing during copies

* fix(sftp): recover queued copy shell ids

* fix(sftp): wait for delayed copied shells

* fix(sftp): detect failed shell discovery

* fix(sftp): discard partial discovery output

* fix(sftp): address copied session review cases
2026-07-21 15:50:03 +08:00
bincxz 6cc0329a1c fix(ssh): apply MFA auth preference consistently 2026-07-20 20:08:00 +08:00
RainGoal 83f4978cd5 fix(ssh): prefer keyboard-interactive for MFA hosts
Problem: some SSH servers require the login password and the MFA challenge through keyboard-interactive. They reject the plain SSH password authentication method even when the password is correct, which makes Netcatty report password failures and can close the session before a usable shell opens.

Fix: add an explicit per-host Prefer interactive auth setting, reuse the existing requiresMfa host flag, forward it from the renderer to the native SSH bridge, and place keyboard-interactive before password only when that setting is enabled and a password is available. Hosts that do not enable the setting keep the existing auth ordering.

Tests: add a bridge regression test for the MFA auth order and extend the terminal starter test to assert the host option is forwarded.
2026-07-20 10:57:41 +08:00
derr 3e4fb1b411 fix(ssh): retry keyboard-interactive when password removes KI (#2249) 2026-07-16 12:58:53 +08:00
bincxz 9a0956595c fix(ssh): drop host MFA switch; password-first with automatic KI fallback
Always try password before keyboard-interactive for the first factor. After
any partial success, prefer keyboard-interactive when the server still allows
it so multi-factor/EDR second factors work without a per-host switch. Remove
the requiresMfa UI and "remember MFA" checkbox; keep secondary-prompt
protections and hostId-aware password save.
2026-07-15 23:51:46 +08:00
ydm 0d6513c14e fix(ssh): 精确保存 MFA 主机并调整证书认证顺序 2026-07-15 23:51:46 +08:00
ydm 3ae7662122 fix(ssh): partial success 保持 KI 优先 2026-07-15 23:51:46 +08:00
bincxz f2dc48e8b6 fix(ssh): host-level MFA instead of global keyboard-interactive first
Default stays password-first for ordinary hosts. Hosts with requiresMfa
prefer keyboard-interactive so EDR secondary factors are not skipped.
Secondary prompts can suggest enabling MFA mode for that host.
2026-07-15 23:51:46 +08:00
ydm 932af63b26 fix(ssh): 保留 KI 动态回退机会 2026-07-15 23:51:45 +08:00