* fix(ui): open AI silent sessions in an attach terminal popup
Tray jumps for hidden MCP sessions attach the existing terminal popup
to the live PTY instead of activating a tab-less main-window surface.
Output is rebound to the popup and restored when the popup closes.
* fix(terminal): register rebindOutput handlers under worker mode
Worker-enabled builds returned early from terminalBridge.registerHandlers
without registering rebind/restore IPC, so the first AI silent-session
attach popup always failed with "No handler registered". Register those
handlers in both paths and rebind display routing via terminalWorkerManager.
* fix(terminal): harden AI attach popup for worker mode lifecycle
Address codex review P1s: resume flow control before restoring output,
route exit/events to the rebound renderer, and replay home scrollback
via a snapshot request before rebinding display output.
* fix(terminal): restore attach routing on popup close and dual-notify exit
Hardening for AI observe popups: restore output from BrowserWindow closed
lifecycle (not only React cleanup), keep attach home for exit events so
main/tray lifecycle updates, and resume paused backend flow on attach.
* fix(terminal): resume flow on attach restore and close snapshot gaps
Resume backend output when attach popups are force-closed, fan out
lifecycle exit events to home+display in non-worker mode, and pause
during snapshot→rebind so live bytes are not dropped from the popup.
* fix(terminal): harden attach restore and worker lifecycle edges
Prefer live display for ZMODEM dialogs after rebind, dual-notify worker
crash exits to attach-home, and avoid clearing attach-home when restore
targets a dead renderer.
* fix(terminal): sync observe-popup state home and fan out SSH exits
Push popup serializations home before restore, fall back to hibernate
snapshots, settle briefly after pause for worker handoff, and dual-notify
SSH exits to attach-home owners in non-worker mode.
* fix(terminal): fan out exits for mosh/telnet/et attach owners
Use shared fanout for in-process protocol exits so attach-home and
display renderers both receive netcatty:exit under non-worker mode.
* fix(terminal): restore attach only onto main app windows
Avoid routing silent-session output to settings/prewarm windows when the
original home renderer is gone; fall back only to registered main windows.
* fix(terminal): harden silent session popup handoff
* fix(terminal): close observed popup with session
* fix(terminal): keep observe popup from reconnecting
* fix(terminal): preserve cleared observe snapshots
* fix(terminal): route transfer prompts to observer
* fix(terminal): keep context after observe restore
Jump hosts reuse the same SSH bridge authentication flow as the target host, but the renderer did not serialize the per-host requiresMfa preference into jumpHosts. A bastion configured to prefer keyboard-interactive was therefore still authenticated with the default password-first order when used in a host chain.
Forward requiresMfa from each resolved chain host into the NetcattyJumpHost payload and extend the startSSH serialization test to cover the flag alongside existing jump host proxy and timeout settings.
Problem: some SSH servers require the login password and the MFA challenge through keyboard-interactive. They reject the plain SSH password authentication method even when the password is correct, which makes Netcatty report password failures and can close the session before a usable shell opens.
Fix: add an explicit per-host Prefer interactive auth setting, reuse the existing requiresMfa host flag, forward it from the renderer to the native SSH bridge, and place keyboard-interactive before password only when that setting is enabled and a password is available. Hosts that do not enable the setting keep the existing auth ordering.
Tests: add a bridge regression test for the MFA auth order and extend the terminal starter test to assert the host option is forwarded.
Always try password before keyboard-interactive for the first factor. After
any partial success, prefer keyboard-interactive when the server still allows
it so multi-factor/EDR second factors work without a per-host switch. Remove
the requiresMfa UI and "remember MFA" checkbox; keep secondary-prompt
protections and hostId-aware password save.
Default stays password-first for ordinary hosts. Hosts with requiresMfa
prefer keyboard-interactive so EDR secondary factors are not skipped.
Secondary prompts can suggest enabling MFA mode for that host.
Store host sftpFileProtocol on SSH sessions so openSftpForSession used by
Catty/MCP/clipboard respects SFTP-only or forced SCP without payload.
Destroy the local read stream when the peer ACK loses the upload race.
Do not cancel ready/startup work when disposeExitRef is cleared for
hibernate detach. Dispose the pre-start ready subscription when
startMoshSession rejects before attach so retries do not leak listeners.
Subscribe to mosh ready before startMoshSession and drain a ready that
fires during the await after attach. Default moshSessionReadyListeners
in createPreloadApi so lightweight test contexts do not throw on close.
Codex review P2s:
- Dismiss the connection overlay on first handshake output so password/OTP
prompts remain reachable; only defer startup commands and connect/pending
scripts until mosh-client ready.
- Dispose the ready listener via disposeExitRef and closeSession so cancel
does not leak preload callbacks when exit is suppressed.
Mosh connects through an ephemeral SSH handshake PTY before swapping to
mosh-client. Marking connected and firing startup commands too early
sent snippet/script input into that handshake PTY, so run-on-connect
scripts and host startup commands never reached the real shell (#2199).
Tag handshake output with moshHandshake meta, emit mosh ready after the
client swap, and defer connected status + scheduleStartupCommand until
then.
* feat(terminal): configurable su/sudo password prompt assist (#2156)
Extend the existing confirm-to-fill sudo assist to arm on su as well, and
add a Terminal setting for off / quick Enter fill / WindTerm-like credential
picker. Picker candidates come from the host password plus keychain password
identities; secrets are never shown in the list or sent without confirmation.
* fix(terminal): tighten password prompt assist after codex review
- Hint mode only uses the session host password, never an arbitrary
keychain identity as a silent Enter target.
- Build autofill candidates from the effective session host so group-
inherited passwords participate.
- Clear a stale credential picker when the session disconnects.
* fix(terminal): more password-assist polish from codex review
- Do not swallow arrow keys while the quick-fill hint is pending; only the
multi-credential picker consumes them.
- Clear the picker overlay on hibernate and wake so it cannot outlive the
autofill controller.
- Show the resolved auth username on the host candidate row (identityId /
group identity), not a stale host.username after password dedupe.
* fix(terminal): keep password picker select callback stable
Avoid forcing TerminalView memo invalidation on every Terminal render by
using a stable useCallback for credential selection.
* fix(terminal): do not offer full keychain on unarmed sudo prompts
Picker mode only lists all password identities after a real su/sudo
command was armed. Unarmed explicit [sudo] lines still get host-password
quick-fill only, blocking remote prompt phishing of other credentials.
* fix(terminal): fix picker mode switch and armed picker test
Arm before inspecting the picker payload, and when switching settings
mid-prompt recompute whether the command arm is still valid so picker
mode can open the full list.
* fix(terminal): reopen password picker after a wrong credential
Keep the su/sudo arm active after confirm-to-fill so a rejected password
re-prompt can offer the full credential list again instead of falling
back to host-only unarmed assist.
* fix(terminal): only re-assist real auth retries after fill
Keep a short post-fill arm for wrong-password re-prompts, but require an
explicit [sudo] line or authentication-failure text before reopening
assist. Prevents sending the host password into child prompts after a
successful sudo (e.g. sudo mysql -p).
* fix(terminal): scope sudo assist away from child password prompts
Track whether the armed command was sudo or su. su still accepts bare
Password: lines; sudo only assists on [sudo] tags or user-scoped prompts
(password for … / 输入密码), not generic Enter password when sudo is cached.
* fix(terminal): tighten when the full credential picker may open
Exclude child-program prompts (Enter password, Password for user …).
Full keychain picker only for explicit [sudo] lines or armed su Password:
prompts; Kylin-style sudo bare prompts still get host-password hint only.
* fix(terminal): limit full credential picker to armed su only
Multi-identity picker is the WindTerm-style su workflow (#2156). Sudo
keeps host-password quick-fill only, so a cached sudo child cannot open
the full keychain list via a forged or nested password prompt.
* fix(terminal): derive password assist candidates in Terminal + mode gate
- Standalone Terminal popups without TerminalLayer now resolve candidates
from host/keys/identities so su picker mode still works.
- When switching to picker mid-prompt, keep the su-only full-list gate
(do not open multi-identity list for an armed sudo prompt).
* fix(terminal): reject SSH-style prompts for su assist and drop dupe keys
- su bare matching only accepts short Password:/密码 lines, not user@host
SSH password prompts after passwordless su -c.
- Remove duplicate sudoAutofillCandidates keys that failed eslint.
* fix(terminal): cursor-anchor password picker and soft-dismiss Esc
Position the su credential picker with the same cursor-relative layout
helpers as autocomplete instead of fixed bottom-center. Esc only closes
the UI while keeping the arm so Esc/arrows can reopen the list on the
same Password: prompt.
The "Authentication failed…" retry prompt and progress-log line in
createTerminalSessionStarters were hardcoded English and bypassed i18n,
so they rendered in English regardless of the selected language.
Route both through the existing tr() helper and add
terminal.auth.retryMessage / terminal.auth.retryLog to en, ru, zh-CN
and zh-TW.
Tighten renderer output back-pressure (128KB/32KB watermarks), account
coalescer and write-queue backlog, drain output on user keystrokes, and
add main-process IPC ACK flow control so SSH floods cannot starve Ctrl+C
and other keyboard input.
Closes#1711
Mark Telnet as connected once the socket session attaches so devices
that send no banner until client input no longer leave the connecting
overlay blocking keyboard input (fixes#1632).
Co-authored-by: Cursor <cursoragent@cursor.com>
Batch PTY output per animation frame (superset write-coalescer) so Codex
and Claude Code frames render atomically. Distinguish full H+2J redraws
from incremental sync blocks, skip preserve-before-clear inside DEC 2026,
and preserve viewport position across terminal resize.
Co-authored-by: Cursor <cursoragent@cursor.com>