Commit Graph
157 Commits
Author SHA1 Message Date
90ab87efcc feat(editor): detached multi-tab window with acknowledged content handoff (#3606)
Add a detached multi-tab editor window with acknowledged content ownership, focused Monaco shortcuts, and shared close/save confirmation. Preserve source contents until handoff acknowledgement and block edits or incoming transfers during ownership changes.

Continuation of #3439. Original implementation by pplulee.

Co-authored-by: pplulee <hi@pplulee.me>
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-08 18:11:23 +08:00
Yohannandyangheng 75c155b748 feat(vault): add host connection test to the host editor (#2984)
* feat(vault): add host connection test to the host editor

Add a 'Test' button next to Save in the host editor that opens a dialog reusing the terminal's connection progress/auth/host-key UI, and runs a headless connection probe:

- Main process: netcatty:test-connection reuses startSSHSession in a testMode that authenticates then tears down without opening a shell, reports via netcatty:test:result, and supports cancellation (netcatty:test-connection:cancel).
- Renderer: useHostConnectionTest hook + HostConnectionTestDialog component; single-credential auth (no agent/default-key fallback) with short test timeouts (8s TCP / 15s auth).
- Reuses terminal chain progress, host-key verification, and auth prompts; success keeps the same dialog with retry/close.

* fix(ssh): cancel test connections during chain/proxy dial

Register the headless test-connection transport before connectThroughChain / createProxySocket runs, and update its pendingConn / chainConnections as hops and proxy sockets are established. This lets cancelTestConnection abort a slow/unreachable bastion or proxy dial instead of leaving it running until timeout.

* fix(ssh): address host connection test review feedback

- Route jump-host keyboard-interactive prompts through the external scope in test mode
- Always offer keyboard-interactive for requiresMfa hosts in test mode, including key/certificate-only auth
- Derive the renderer test deadline from the probe options and cancel the attempt on timeout
- Run the macOS Local Network preflight before connection tests
- Add regression tests for jump-host MFA, MFA auth order, test deadline, and macOS preflight

Author: yangheng
Model: claude-opus-5

---------

Co-authored-by: yangheng <492238647@qq.com>
2026-10-08 14:42:18 +08:00
b2ed83ae51 fix(tray): add independent persisted show-tray-icon setting (#3572)
* fix(#3553): automated AI fix

* fix(tray): keep icon visible independently of close behavior

* docs(settings): clarify background close behavior

* fix(settings): preserve tray visibility for existing users

---------

Co-authored-by: netcatty-bot <308658023+netcatty-bot@users.noreply.github.com>
Co-authored-by: binaricat <16399091+binaricat@users.noreply.github.com>
2026-09-30 15:11:23 +08:00
陈大猫 f91b2cd04e feat(ai): scope external MCP approvals to connection or host (#3569)
* feat(ai): scope external MCP approvals to connection or host

* test(ai): keep MCP fixture in Netcatty temp directory

* fix(ai): refine external MCP approval UI and grant safety

* fix(ai): wrap long approval targets and support Node 22

* fix(ai): keep automatic scripts in observer mode

* fix(sftp): release preflight markers after transfer

* fix(sftp): retain preflight cap through conflict resolution

* Keep SFTP preflight cap across panel remount

* Update worker terminal metadata expectations

* Persist SFTP preflight skip state across restart

* Limit persistent host approvals to saved hosts

* Scope host-open approvals to the selected saved host

* Exclude serial hosts from persistent approval scopes
2026-09-30 09:57:47 +08:00
cb06857480 feat(terminal): confirm before pasting multiple lines (#3398) (#3400)
* fix(#3398): automated AI fix

* fix: address Codex review on PR #3400

* fix: address Codex review on PR #3400

* fix: address Codex review on PR #3400

* fix: address Codex review on PR #3400

* fix: address Codex review on PR #3400

* fix: address Codex review on PR #3400

* fix: address Codex review on PR #3400

* fix: address Codex review on PR #3400

* fix: address Codex review on PR #3400

* fix: address Codex review on PR #3400

* fix(terminal): protect popup and sanitized multiline pastes

* fix(terminal): preserve input state across paste confirmation

* fix(terminal): retain serial character-mode paste echo

* test(terminal): cover paced input write options

* fix(terminal): retain telnet echo for paced pastes

* test(terminal): scope serial buffer assertion to serial sessions

* fix(terminal): align runtime write options with bridge contract

* fix(terminal): preserve bookkeeping for all paced pastes

* fix(terminal): record confirmed paste lines in order

* fix: record paced paste commands after transport writes

* fix: omit paste receipts for filtered input

* fix: cancel superseded paste batches across input paths

* fix: classify each acknowledged paste line before recording

* fix: stop paced paste when editing buffered serial input

* fix: preserve recording pause boundaries and serial edit cancellation

* fix: treat paced terminal pastes as user input

* fix: preserve paste drafts until write and snippet broadcast origin

* fix: retain filtered paste drafts and invalidate urgent input ownership

* fix: broadcast paced user paste only on guarded line receipts

---------

Co-authored-by: netcatty-bot <308658023+netcatty-bot@users.noreply.github.com>
Co-authored-by: bincxz <16399091+binaricat@users.noreply.github.com>
2026-09-18 15:19:34 +08:00
9082aa08a4 fix(serial): auto-login on serial consoles with saved host credentials (#3418)
* fix(#3417): automated AI fix

* fix: address Codex review on PR #3418

* fix: address Codex review on PR #3418

* fix: address Codex review on PR #3418

* fix: address Codex review on PR #3418

* fix: address Codex review on PR #3418

* fix: address Codex review on PR #3418

* fix: address Codex review on PR #3418

* fix: address Codex review on PR #3418

* fix: address Codex review on PR #3418

* fix: guard serial quick login and reconnect startup commands

* fix: preserve serial startup while tabs sleep

---------

Co-authored-by: netcatty-bot <308658023+netcatty-bot@users.noreply.github.com>
Co-authored-by: bincxz <16399091+binaricat@users.noreply.github.com>
2026-09-18 14:10:58 +08:00
nervi0s ec2f0d0bce fix: support native file dragging from local filesystem panes (#3377)
* fix: support native file dragging from local filesystem panes

* fix: preserve symlink-aware paths during native file drag
2026-09-18 14:10:26 +08:00
Ryanisgoodandbincxz 3738565b1b feat(mcp): improve external agent discovery and setup (#3407)
* fix(ai): expose renamed terminal session labels

* feat(mcp): guide agents toward Netcatty tools

* feat(mcp): load Netcatty toolsets on demand

* feat(codex): install Netcatty skill with external MCP

* feat(mcp): install skills for Claude Code and Grok

* feat(mcp): add universal client setup prompt

* fix(mcp): keep Cursor in client setup tabs

* chore(ai): refresh generated tool specs

* fix(mcp): honor Claude skill config root and run MCP tests in CI

---------

Co-authored-by: bincxz <16399091+binaricat@users.noreply.github.com>
2026-09-18 14:10:20 +08:00
lengyuqu 9e74618f2e feat: upgrade CodeBuddy SDK integration 2026-09-14 16:38:33 +08:00
86d8c5279d fix(port-forwarding): add per-rule auto-reconnect on disconnect (#3328)
* fix(#3326): automated AI fix

* fix: address Codex review on PR #3328

* fix: address Codex review on PR #3328

* fix(port-forwarding): honor explicit reconnect preference

* fix(port-forwarding): save auto-start alongside reconnect preference

* fix(port-forwarding): coordinate tray starts in main window

---------

Co-authored-by: netcatty-bot <308658023+netcatty-bot@users.noreply.github.com>
Co-authored-by: bincxz <16399091+binaricat@users.noreply.github.com>
2026-09-12 13:47:34 +08:00
keroroyukiandbincxz 15b16ab7b2 fix: serial backspace leaves hidden chars for multi-byte CJK input (#3325)
* fix: serial backspace leaves hidden chars for multi-byte CJK input

Serial terminals process backspace at the byte level: one 0x7F removes
one byte from the device input buffer. For multi-byte CJK characters
(UTF-8: 3 bytes, GB18030: 2 bytes), a single backspace leaves orphan
bytes that render as hidden or garbled characters.

Fixes three layers of the problem:

1. Character mode (createXTermRuntime.ts): when backspace is received
   and the command-buffer's last character is wider than one byte,
   send as many backspace bytes as the character occupies on the wire
   so the device deletes the whole character.

2. Local echo (serialLocalEcho.ts): formatSerialLocalEcho now accepts
   a backspaceCells parameter so CJK ideographs (2 terminal cells)
   erase both cells instead of just one.

3. Line mode (serialLineInput.ts, Terminal.tsx): backspace local echo
   now erases the correct number of cells based on the deleted
   character's display width.

Adds serialCharMetrics.ts with getCharDisplayWidth (East Asian Width)
and getCharByteLength (UTF-8 / GB18030) utilities.

39 new and updated tests all pass.

* fix: address codex review — surrogate pairs, effective encoding, cursor guard, broadcast

Address all 5 P2 Codex review comments on PR #3325:

1. GB18030 4-byte supplementary chars: CJK Extension B+ (cp > 0xFFFF)
   now returns 4 bytes instead of 2, matching iconv-lite's GB18030
   encoder.

2. Effective session encoding: add currentEncodingRef to runtime
   context so toolbar encoding changes propagate to backspace byte
   length calculation (not just the saved host.charset).

3. Cursor-movement guard: track lastInputWasPrintable so backspace
   byte expansion only fires when the cursor is at the end of the
   typed buffer, not after arrow-key escape sequences.

4. Surrogate-pair-safe slicing: getLastChar/removeLastChar helpers
   handle UTF-16 surrogate pairs (emoji, CJK Extension B) so slice(0, -1)
   never leaves an orphan high surrogate.

5. Broadcast expansion: when backspace is expanded for the source
   serial session, the same expanded data is sent to broadcast peers
   instead of the original single-byte backspace.

Adds isPrintableInput, getLastChar, removeLastChar helpers.
56 tests pass.

* fix: address codex review — scope, bracketed paste, cursor confidence

Address 3 new Codex review comments on PR #3325:

1. P1: isExpanded/outData were declared inside the character-mode else
   block but referenced after it (ReferenceError in serial line mode).
   Moved declarations before the if/else so both branches share scope.

2. P2: Bracketed paste (\x1b[200~...\x1b[201~) starts with ESC so
   isPrintableInput returned false, losing tail confidence. Now detected
   and lastInputWasPrintable set to true.

3. P2: Printable input after a cursor movement reset lastInputWasPrintable
   to true even though the cursor was not at the buffer end. Now the flag
   is kept as-is when printable text is typed — only escape sequences
   reset it to false.

* fix: establish cursor-tail confidence for initial and post-submission typing

Address Codex review: lastInputWasPrintable started false, so the first
printable input after session start or line submission would keep it
false, defeating the backspace byte expansion guard.

- Initialize to true: cursor is at the end of an empty buffer at
  session start and after each line submission.
- Reset to true after Enter (handledSubmittedInput), Ctrl+C, and
  Ctrl+U — all three clear the command buffer, placing the cursor
  at the beginning of a fresh line.

This restores the original fix for the common case: type 你, press
Backspace, device receives 3 bytes and deletes the whole character.

* fix: address codex review — broadcast safety, paste cursor state, hibernation wake

Address 3 new Codex review comments on PR #3325:

1. Broadcast safety: stop forwarding expanded backspaces to broadcast
   peers. Each peer has its own protocol, encoding, and command buffer,
   so the source's repeated DELs can over-delete on non-serial peers
   (SSH character-level) or on serial peers with different encodings
   (GB18030 needs 2 DELs, not 3). The source session still receives
   the expanded data; broadcast peers get the original single DEL.

2. Bracketed paste cursor state: no longer unconditionally set
   lastInputWasPrintable=true on paste. After a cursor movement the
   paste inserts at the moved cursor, not the buffer tail, so the
   flag is now preserved as-is (false stays false).

3. Hibernation wake: initialize lastInputWasPrintable conservatively
   when commandBufferRef is nonempty. A hibernated session retains
   its buffer but the pre-hibernation cursor may have been moved,
   so we start with false instead of true.

* fix: grapheme-safe backspace + gate expansion behind byteOrientedBackspace

Address 2 new Codex review comments on PR #3325:

1. Remove the whole grapheme on backspace (P2):
   getLastChar/removeLastChar only handled UTF-16 surrogate pairs, so a
   decomposed grapheme like e + U+0301 returned only the combining mark
   and left the base. Rewrite both with Intl.Segmenter (grapheme
   granularity) so surrogate pairs, combining marks, variation
   selectors, and ZWJ sequences are removed as one unit. getCharByteLength
   and getCharDisplayWidth already compose correctly for graphemes.

2. Gate byte expansion on byte-oriented line editing (P2):
   Character-aware serial endpoints (e.g. a UTF-8 Linux console with
   readline) delete one whole character per DEL, so repeating the
   backspace 3x for a 3-byte char over-deletes. Add an explicit
   serialConfig.byteOrientedBackspace flag (default true, preserving the
   original fix) that users can disable for character-aware editors.
   Wired through the serial connect modal and host details panel, with
   i18n in en/zh-CN/zh-TW/ru/es, vault host validation, and session
   restore/snapshot preservation.

170 tests pass.

* fix: xterm grapheme width for local echo + always compute cell width

Address 2 new Codex review comments on PR #3325:

1. Use xterm's grapheme width for local-echo erasure (P2):
   getCharDisplayWidth returned 1 for emoji-presentation graphemes
   (e.g. ❤️, 1️⃣, ©️) whose base characters fall outside the standard
   emoji range. The 15-graphemes Unicode provider active in
   createXTermRuntime renders these as 2 cells. Now import
   stringCellWidth from terminalStringCellWidth.ts (which uses
   _core.unicodeService.getStringCellWidth when available) in both
   character mode (createXTermRuntime) and line mode (Terminal.tsx,
   serialLineInput). Add VS16 (U+FE0F) detection to both the xterm
   fallback and the domain getCharDisplayWidth so emoji-presentation
   graphemes are correctly 2 cells even without xterm.

2. Compute local-echo width when byte deletion is disabled (P2):
   When byteOrientedBackspace is false, the entire backspace block was
   skipped, leaving backspaceCells at 1 and erasing only half of a
   2-cell CJK/emoji glyph in local echo. Restructured the condition:
   display width is now always computed when backspacing a non-empty
   buffer, while wire-byte expansion is independently gated on
   byteOrientedBackspace.

182 tests pass.

* fix: read byteOrientedBackspace from session snapshot, not live host

Address Codex review (P2): a restored or hibernated session's
snapshotted serialConfig.byteOrientedBackspace can differ from the
current vault host (e.g. session saved false, host later changed to
true). The runtime read the live host instead of the snapshot, so
after recreation a character-aware session could start expanding DEL
and over-delete again.

Add serialByteOrientedBackspace to the runtime context (mirroring
serialLineMode and serialLocalEcho) and pass it from the session
snapshot in useTerminalEffects. Default true preserves the existing
fix for byte-oriented devices.

182 tests pass.

* fix: carry serialByteOrientedBackspace and currentEncodingRef into hibernation wake context

Address Codex review (P2): xTermRuntimeContextRef.current in Terminal.tsx
omitted serialByteOrientedBackspace and currentEncodingRef, so when
hibernateHiddenTabs woke a serial tab the runtime fell back to default
values (byte-oriented=true, host charset). A session snapshot with
byteOrientedBackspace=false would re-enable byte expansion after waking,
and a toolbar-selected encoding would be lost.

Added both fields to the wake context alongside serialLocalEcho and
serialLineMode, mirroring the useTerminalEffects mount path.

182 tests pass.

* fix: tail confidence after line submission, GB18030 4-byte BMP, free-form encodings

Address 3 Codex review comments (all P2):

1. Preserve tail confidence after line submission:
   After Enter submission sets lastInputWasPrintable = true, the same
   \r/\n went through the generic control-char branch and immediately
   reset it to false. This disabled byte expansion and correct local-echo
   width for every subsequent command. Now skip the reset when
   handledSubmittedInput is true.

2. Measure GB18030 bytes with the backend encoder:
   getCharByteLength assumed every BMP non-ASCII character is 2 bytes.
   But BMP characters outside the GBK character set (e.g. U+0100 'Ā')
   encode to 4 bytes in GB18030. Added isGbkCharacter() to check the
   GBK character set ranges; non-GBK BMP characters now return 4.

3. Use the backend charset for free-form serial encodings:
   currentEncodingRef is now always present (hibernation wake fix), so
   the ?? fallback to host.charset never triggered. For a Shift_JIS host
   with no toolbar override, currentEncodingRef.current is 'utf-8' (the
   default), causing UTF-8 byte lengths (3 for あ) instead of Shift_JIS
   (2). Now prefer host.charset when it's non-UTF-8 and the toolbar
   encoding is the default. Also added Shift_JIS support to
   resolveWireEncoding and getCharByteLength (1 byte ASCII, 2 bytes
   non-ASCII).

182 tests pass.

* fix: honor remembered UTF-8 when counting serial bytes

Address Codex review (P2): the previous fix treated every
toolbarEnc === 'utf-8' as an unselected default and overrode it with
the host charset. But a GB18030 host with a remembered UTF-8 preference
has its backend session synced to UTF-8 (via shouldSyncTerminalEncodingOnAttach),
so using the host's GB18030 charset for byte counting is wrong.

Now use resolveTerminalEncodingFromCharset to check if the host charset
is recognized by the toolbar system (UTF-8 or GB18030). For recognized
charsets, the toolbar encoding is authoritative (it may reflect a
remembered override). For unrecognized charsets (e.g. Shift_JIS), the
toolbar encoding falls back to the default (utf-8), so the host charset
is the correct wire encoding.

193 tests pass (including terminalEncodingPreference.test.ts).

* fix: honor toolbar changes for free-form charsets + GB18030 4-byte CJK Ext A

Address 2 Codex review comments (both P2):

1. Honor toolbar changes for free-form serial charsets:
   When a Shift_JIS session starts and the user later selects UTF-8 in
   the toolbar, setSessionEncoding switches the backend to UTF-8, but
   the runtime continued using host.charset because it is outside the
   two-option resolver. Now pass userPickedEncodingRef to the runtime
   context (mirroring existing use in shouldSyncTerminalEncodingOnAttach).
   The effective encoding logic:
   - Non-utf-8 toolbar → trust toolbar (explicit selection)
   - utf-8 toolbar + userPickedEncoding → trust toolbar (explicit utf-8)
   - utf-8 toolbar + recognized charset → trust toolbar (remembered override)
   - utf-8 toolbar + unrecognized charset → use host.charset (backend default)

2. GB18030 4-byte for CJK Extension A:
   isGbkCharacter classified U+3400–U+4DBF (CJK Extension A) as 2-byte
   GBK characters, but iconv-lite encodes this block as 4 bytes in
   GB18030. Removed the range; these characters now correctly return 4.

193 tests pass.

* fix: simplify effective encoding logic with backendSynced flag

Follow-up to previous fix: the 4-level decision tree had an edge case
where a Shift_JIS host with remembered UTF-8 would use host.charset
instead of the synced toolbar encoding. Simplified to a 3-level logic
using backendSynced = userPicked || hasRemembered:

- backendSynced OR recognized charset → trust toolbar encoding
- NOT synced AND unrecognized charset → use host.charset (backend default)

Added hasRememberedEncodingRef to runtime context (alongside existing
userPickedEncodingRef) so the logic mirrors shouldSyncTerminalEncodingOnAttach.

193 tests pass.

* fix: sum grapheme code points, remove Latin-1 from GBK, generic multi-byte fallback

Address 3 Codex review comments (all P2):

1. Sum every code point in non-UTF-8 graphemes:
   GB18030 and Shift_JIS returned after the first non-ASCII code point
   instead of counting the complete grapheme that getLastChar returns.
   ❤️ (U+2764 U+FE0F) is 8 GB18030 bytes, but the old code returned 4.
   Now accumulate byte lengths for all code points, like the UTF-8 path.

2. Stop classifying Latin-1 as two-byte GBK:
   U+00A1–U+00FE was in isGbkCharacter, but iconv-lite encodes these
   as 4 bytes in GB18030. Removed the range; these characters now
   correctly return 4 bytes.

3. Count bytes for every backend-supported serial charset:
   Unknown encodings fell back to UTF-8 byte length, but the backend
   uses iconv-lite for Big5, EUC-JP, Johab, etc. (2 bytes for CJK).
   Changed fallback to 1 byte ASCII + 2 bytes non-ASCII, matching
   iconv-lite's multi-byte encoding for common serial charsets.

Comment 4 (remembered override for free-form charsets) was already
fixed in commit fca4e7c0: backendSynced = userPicked || hasRemembered.

193 tests pass.

* fix: Shift_JIS half-width Katakana as 1 byte (iconv-lite 0xA1-0xDF)

Address Codex review (P2): half-width Katakana characters like ア
(U+FF71) are encoded as single bytes (0xB1) in Shift_JIS by iconv-lite,
but the previous code counted every non-ASCII character as 2 bytes.
Backspace sent 2 DELs, deleting the character and one preceding byte.

Now handle the three 1-byte non-ASCII cases in Shift_JIS:
- Half-width Katakana (U+FF61-U+FF9F, mapped to 0xA1-0xDF) → 1 byte
- ¥ (U+00A5, mapped to 0x5C) → 1 byte
- All other non-ASCII → 2 bytes

Self-review: traced all 4 encoding paths (UTF-8, GB18030, Shift_JIS,
unknown fallback) × all edge cases (single/multi-code-point graphemes,
ASCII/BMP/supplementary, GBK/non-GBK ranges). All paths verified correct.

193 tests pass.

* fix: deduplicate terminal width import after main merge

* test: retain input safety checks with serial erase metadata

* fix: restore serial editing after paste and document byte mode

* fix: keep pending serial input on its original encoding

* fix: restore serial backspace after urgent interruption

* fix: retain editable serial snippet input for backspace

* fix(serial): synchronize pending snippet tail state

* fix(serial): unify empty-line input state across text sources

* fix(serial): track editable startup snippets

* fix(serial): share pending-tail tracking for multiline input

---------

Co-authored-by: bincxz <16399091+binaricat@users.noreply.github.com>
2026-09-12 13:10:52 +08:00
f83b5f6693 fix(sftp): allow copy and paste within the same pane (#3318)
* fix(#3317): automated AI fix

* fix: address Codex review on PR #3318

* fix: address Codex review on PR #3318

* fix: address Codex review on PR #3318

* fix: address Codex review on PR #3318

* fix: address Codex review on PR #3318

* fix: address Codex review on PR #3318

* fix: address Codex review on PR #3318

* fix(sftp): preserve source links during same-pane replacement

* fix(sftp): leave self-directory merge and replace unchanged

* fix(sftp): scope local traversal limits to same-pane copies

* refactor(sftp): centralize same-pane paste filesystem checks

* fix(sftp): preserve source links through bind-mounted parents

---------

Co-authored-by: netcatty-bot <308658023+netcatty-bot@users.noreply.github.com>
Co-authored-by: bincxz <16399091+binaricat@users.noreply.github.com>
2026-09-12 12:25:18 +08:00
陈大猫andnetcatty-bot 1babda6fa9 fix(sync): resume auto-sync after first master-key setup (#3302)
* fix(sync): retry peer unlock when the shared password becomes available

* fix(sync): retain deliberate locks after availability notifications

* fix(sync): preserve deliberate locks after peer password events

* fix(sync): retain deliberate locks across consumer remounts

* fix: address Codex review on PR #3302

* fix: address Codex review on PR #3302

* fix: address Codex review on PR #3302

* fix: address Codex review on PR #3302

* test(sync): cover pending unlock owner handoff

* fix(sync): distinguish stale unlocks from invalid passwords

* fix(sync): retry completed auto unlock after consumers remount

* fix(sync): share auto unlock retry generation across consumers

---------

Co-authored-by: netcatty-bot <308658023+netcatty-bot@users.noreply.github.com>
2026-09-07 10:30:30 +08:00
陈大猫 a1fce3ad7c Merge pull request #3238 from ice616/feat/auto-launch-at-login
feat(settings): 支持开机自启动并最小化到系统托盘
2026-09-02 13:30:55 +08:00
bincxz ccacb69bb9 fix(sftp): bind terminal drops to active route 2026-09-01 19:58:55 +08:00
axe006 0068180204 Merge branch 'main' of https://github.com/binaricat/Netcatty into feat/auto-launch-at-login 2026-09-01 18:24:53 +08:00
axe006andClaude Sonnet 5 513b2d66af feat(settings): 支持开机自启动并最小化到系统托盘
在「设置 → 系统 → 网络代理」卡片上方新增开机自启动开关,开启后
系统启动时自动运行 Netcatty,并隐藏到系统托盘(不占用任务栏)。

- 新增 electron/autoLaunch.cjs 封装 app.setLoginItemSettings,
  通过 --hidden 启动参数标记本次是登录项冷启动;开发环境
  (process.defaultApp)下判定为不支持,避免误操作系统登录项。
- 主窗口首次冷启动读取该标志后跳过 win.show(),并在托管桥注册
  完成后强制创建托盘图标(不依赖用户是否开启「关闭时最小化到
  托盘」),确保隐藏窗口始终可被找到;后续任何窗口复用/深链接/
  托盘点击路径不受影响。
- 开关真实状态以主进程 app.getLoginItemSettings() 为准,设置页
  挂载时向主进程查询校准,而非只信任本地缓存。
- 新增单测覆盖 autoLaunch 纯逻辑及 startHidden 透传/托盘保底
  行为,过程中发现并修复一处因未走依赖注入直接 require 模块
  导致的隐患。

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
2026-09-01 18:16:42 +08:00
netcatty-bot 53e46323ed fix(#3188): automated AI fix 2026-08-28 10:04:46 +00:00
bincxz 79aafcdb1a feat(ai): make response wait configurable 2026-08-21 15:39:01 +08:00
bincxzandCursor d422a27715 Merge origin/main into feature/app-lock-screen
Reconcile the app-lock feature with main's refactored renderer
architecture (publishers/hosts/AppShell) and main-process changes:

- index.tsx/App.tsx: AppLockGate keeps ownership of useSettingsState and
  useAppLockState; new AppLockRuntimePublisher publishes the runtime via
  appRuntimeBridge; SettingsPublisher now binds the gate-owned settings.
- AppSideEffects: defer deep links, tray port-forward toggles, global
  hotkeys and window close commands while locked; flush on unlock.
- main.cjs: keep fresh-session re-lock before main's reusable-window
  fast path; before-quit guard delegates to handleBeforeQuit with main's
  async plugin-shutdown commitQuit and pending-update cancellation.
- globalShortcutBridge: keep locked-state tray redaction on top of
  main's deferred tray panel show logic.
- preload: adopt main's lastPayload replay for terminal popup config
  (superset of the gate-delay replay fix).
- vite config: keep dev CSP plugin, adopt main's warn-only stale
  optimize-dep handling; electron-builder: keep Windows Hello helper
  extraResource with main's CLI-controlled arch targets.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-08-18 16:30:30 +08:00
陈大猫andCursor 074acc3bed feat(sftp): add right-click extract for archives (#3042)
* feat(sftp): add right-click extract for archives

Let SFTP list and tree views unpack zip/tar/gz archives in place via remote SSH exec (or local tar/unzip), so users do not need to switch to another file manager.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(sftp): keep extract from clobbering files or dying on unzip output

Write gzip/bzip2/xz results to a staging path and replace the destination only after a zero exit. Drain unzip progress instead of treating routine stdout as a hard failure.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(sftp): quote extract cleanup trap and use unique staging files

Remote gzip/bzip2/xz nested a quoted path inside trap, so names with spaces failed before decode. Staging now exclusively creates a unique sibling, and local .gz uses Node zlib.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(sftp): refuse single-file extract onto an existing directory

Remote mv would otherwise drop the staging file inside that directory and still report success.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(sftp): restore the previous file if Windows extract replace fails

Rename the destination aside before publishing the staging file, instead of deleting it first.

Co-authored-by: Cursor <cursoragent@cursor.com>

---------

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-08-18 12:00:16 +08:00
bincxz 2a52837657 feat(terminal): show desktop notifications for OSC 9/777/99
Closes #3019

Codex and other agents emit OSC 9 when a turn completes or approval
is needed, but Netcatty ignored those sequences. Register OSC 9, 777
notify, and kitty OSC 99 handlers, map them to Electron notifications,
and reuse tray focus so a click jumps back to the emitting session.
Ignore ConEmu OSC 9;n progress sequences so they do not become toasts.
2026-08-18 09:28:11 +08:00
陈大猫 40f4e29833 Merge pull request #2965 from binaricat/cursor/issue-2963-31683461693
feat(settings): add startup landing preference for local terminal
2026-08-14 16:57:54 +08:00
bincxz 54e3601426 fix(sftp): complete safe permission-preserving replace 2026-08-14 10:46:11 +08:00
netcatty-bot bbc1a08848 fix: address Codex review on PR #2965 2026-08-13 09:40:27 +00:00
netcatty-bot 3064a9d39c fix: address Codex review on PR #2955 2026-08-13 06:07:13 +00:00
netcatty-bot dbfd5b5758 fix: address Codex review on PR #2955 2026-08-13 05:29:48 +00:00
ydm 01102e2d66 merge: 同步 main 并解决 SFTP 复用冲突 2026-08-12 18:19:45 +08:00
ydm dfc9ed7f61 fix(sftp): 复用 SSH 会话打开 sudo SFTP 2026-08-12 17:58:45 +08:00
netcatty-bot f2b3facd9f fix: address Codex review on PR #2925 2026-08-12 09:32:41 +00:00
bincxz bbd4c698a5 fix(ai): harden host_open session lifecycle 2026-08-12 16:42:43 +08:00
bincxz df045bf144 Revert "fix: address Codex review on PR #2906"
This reverts commit a1b7f3708a.
2026-08-11 23:57:57 +08:00
bincxz 32447885d9 Revert "fix: complete terminal shortcut routing"
This reverts commit c921e7d9a4.
2026-08-11 23:57:57 +08:00
bincxz c921e7d9a4 fix: complete terminal shortcut routing 2026-08-11 23:01:32 +08:00
netcatty-bot a1b7f3708a fix: address Codex review on PR #2906 2026-08-11 14:47:01 +00:00
bincxz 105107755b fix: route terminal font shortcuts by focus 2026-08-11 22:14:06 +08:00
netcatty-bot b9702b043a fix(#2886): automated Cursor CLI fix 2026-08-11 06:27:49 +00:00
a965a94f0d fix(session-logs): omit alternate-screen TUI paint from logs (#2875)
* fix(#2872): automated Cursor CLI fix

* fix: address Codex review on PR #2875

* fix: address Codex review on PR #2875

* fix(session-logs): sample alternate-screen state after save dialog

Manual session log start previously snapshotted alternate-screen mode
and the initial line before showSaveDialog resolved. Split path selection
from stream start so the renderer re-samples buffer state at activation,
avoiding stale omission/leak if the user enters or leaves a TUI while the
dialog is open.

* fix(session-logs): honor C1 CSI alternate-screen modes in text renderer

8-bit CSI (U+009B) is a valid alternate form of ESC[. Recognize it in
TerminalTextRenderer so DECSET 47/1047/1049 enter/leave still omits TUI
paint from txt/HTML session logs when remotes use the C1 encoding.

* fix(session-logs): apply log-safe RIS reset in text renderer

RIS now leaves alternate-screen mode, resets SGR to defaults, and starts
post-reset shell text on a new log line when needed so mid-line TUI
exits do not glue onto prior output or keep pre-entry colors. History is
preserved because session logs are not live screen wipes.

* fix(session-logs): token-bind dialog path and rebase after RIS

- chooseManualSessionLogPath stores the selected path in main and returns
  an opaque selectionToken; startManualSessionLog redeems that token and
  rejects renderer-supplied filePath so the save dialog cannot be bypassed.
- RIS rebases screenBaseRow onto a fresh log screen (history preserved)
  so post-reset CSI H cannot overwrite pre-RIS text.

* fix(session-logs): seed replay sanitizer on observe attach mid-TUI

When an observe popup restores a snapshot while vim/less is already on
the alternate buffer, re-seed the connection-log sanitizer from the
restored xterm active-buffer type so subsequent TUI redraws are omitted
until leave.

---------

Co-authored-by: netcatty-bot <308658023+netcatty-bot@users.noreply.github.com>
Co-authored-by: bincxz <16399091+binaricat@users.noreply.github.com>
2026-08-10 23:35:56 +08:00
陈大猫 ea765ce074 feat(system-manager): add Ports and Services tabs with capability gating (#2817)
Related to #2561.

Adds detect-first Ports/Services system manager tabs, network-appliance
read-only gating, and hardened collectors/parsers from Bugbot review.
2026-08-08 02:56:37 +00:00
8ee55963d8 feat(portforward): make main process authoritative for runtime state (#2288) (#2819)
* feat(portforward): make main process authoritative for runtime state

Phase 1 of #2288: add snapshot/runtime event protocol with epoch+revision,
stop persisting active/connecting/error into localStorage, migrate legacy
stored phases on read, and project unknown when snapshots are unavailable.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(portforward): access runtime bridge via netcattyBridge

Satisfy the no-restricted-properties lint rule for window.netcatty.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(portforward): honor snapshot authority and prune on resync

Default runtime projection to unknown until a successful snapshot,
reconcile (not sync-only) on epoch/revision gaps, serialize runtime
event handling, clear worker runtime subscribers on window destroy,
and align tray unknown UX with RuleCard.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

---------

Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>
2026-08-08 02:50:41 +00:00
3490b0673d fix: StrictMode 双发清理 + 笔记页卡顿优化 (#2810)
* Cursor: Apply local changes for cloud agent

* fix(terminal): stop first SSH fail under StrictMode remount

Defer backend boot past the double-invoke, cancel superseded vault init,
gate start on vault hydration, and harden hotkey/attach cleanup so the
first connect no longer races a stale close or empty keychain.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* perf: finish StrictMode mega-subscriber plan (accent isolation + docs)

Stabilize published terminal themes across custom-accent drag, apply accent
at chrome/log leaves and CSS injection only, land Phase 0 design/plan docs,
and lock Host-bag / Bugbot-clean contracts for the isolation checklist.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* docs: add StrictMode mega-subscriber design and plan artifacts

Force-add Phase 0 spec/plan under docs/superpowers (gitignored locally)
so the delivery branch carries the approved design and plan copy.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix: clear remaining StrictMode doubles and notes editor jank

Gate every AI send and reject concurrent runTurn, latch tray connect flush
and settings persistMounted remounts, and stop notes content drafts from
rebuilding MDXEditor/shell on each keystroke.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* perf: gate hidden notes panel subscribe and skip host-link annotate on keystrokes

Hidden terminal notes mounts keep a live snapshot read but stop listening to
publishes. Host-link DOM annotation follows hosts/mode (preview MutationObserver)
instead of every markdown value change.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix: latch SSH transport idle TTL notify under StrictMode

Avoid duplicate main-process notifySettingsChanged on effect double-invoke
when the idle TTL value has not changed.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* perf: freeze inactive vault notes against hosts churn and prefetch MDXEditor

Gate the retained VaultNotesSection notesStore subscription while hidden,
ignore hosts identity in its memo compare when inactive, and warm the lazy
InlineMarkdownEditor chunk when notes become active.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix: clear remaining AI StrictMode double-fire hazards

Latch Ask-AI terminal selection on requestId before draft mutation, hoist
Codex App Server IPC bridge to App (ref-counted), and make Catty
requestApproval join an existing waiter for the same toolCallId.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix: remount-safe AI send latch and skip stale MCP approval IPC

Replace the component sendInFlightRef with a module key latch so StrictMode
panel remount cannot reopen a mid-flight send, and no-op resolveApproval when
the pending entry is already drained.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* test: allow gated useNotesStore in VaultNotesSection memo contract

The retained notes section now passes enabled:isActive so hidden mounts do
not subscribe; update the VaultView memo source assertion accordingly.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix: keep note drafts across mode toggle and external note publishes

Flush ref-only content before edit/preview remount, and skip prop→editor
setMarkdown while a local draft diverges from the last synced value.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* chore: strip StrictMode sermon comments after Bugbot/Comment Sicko pass

Keep effect-order and public-export contracts; drop remount/perf narration
that the latches and tests already encode.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix: remount-safe Ask-AI terminal selection latch

Move consumed requestIds to a module Set so StrictMode remount cannot
append the same selection chip twice before parent state clears.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* chore: drop remount latch comment

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

---------

Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>
2026-08-07 14:38:24 +00:00
陈大猫 443202ba4e fix(sftp): instant folder-drop scan UI and drop full-tree pre-scan (#2782)
* fix(sftp): instant folder-drop scan UI and drop full-tree pre-scan

Restore interleaved folder transfers as the only non-compressed path, remove
the folder pre-scan setting, and make local folder drops show a scanning task
with live discovered counts via native listLocalTree (with cancel + progress).

UI shows "done · found" instead of a fake grand-total percentage while
discovery is still growing.

* fix(sftp): make folder scan cancellation bridge-safe

* fix(sftp): preserve path-only terminal drops

* fix(terminal): accept native folder drop paths

* fix(sftp): keep scan task cancellable during setup

* fix(sftp): preserve scan failure state during setup errors

* fix(sftp): keep folder scan task across retries

* fix(sftp): cancel scan task immediately

* fix(sftp): keep cancellation active through session setup

* fix(sftp): settle failed drop upload retry

* fix(sftp): preserve cancellation in final scan cleanup

* fix(sftp): harden folder scan cancellation and conflicts

* fix(sftp): finish Codex follow-ups on folder scan cancel UX

- Abort sibling listLocalTree walks when one multi-root scan fails
- Prefer ERR_*_CANCELLED over matching "cancel" in error text
- Clear scanning phase on settle; only label live rows as Scanning
- Omit directory metadata sizes from drop entries used for totals

* fix(sftp): stream folder discovery into concurrent uploads

Local path-backed folder drops now edge-scan and edge-transfer: listLocalTree
streams entry batches while upload workers consume them, so the first files
start before a 100k-file walk finishes. Cancel aborts the walk, clears the
queue, and stops creating child tasks. Compressed uploads still materialize
fully then pack.

* fix(sftp): harden progressive folder UX, retry, and size-based uploads

Align the SFTP panel with transfer-center progress, keep nested tree batches
until tree-end, honor pause during progressive enqueue, add low-cost retry for
external drag-drop files, and drop whole-file upload digests for industry
size-based resume (download live-log prefix checks unchanged).

* fix(sftp): address multi-agent review on progressive upload and retry

Gate progressive drops to path-backed folders only, prefer pool sessions on
drag-drop retry with in-flight and cancel guards, soft-check upload mtime
without fail-open contentVerifiedSeparately, skip multi-root pause HOL,
and fail closed when the local tree stream misses tree-end.

* fix(sftp): finish multi-root pause HOL and parent rollup guards

Race-wait on all latched parents so resuming a non-head folder can proceed,
and only roll progressive parents to completed after terminal failed status.

* fix(sftp): address Codex progressive conflict and hang findings

Add root-level conflict preflight to progressive folder uploads, wake all
backpressure waiters, preserve cancel listeners across uploadEntriesDirect,
and surface empty-directory mkdir failures.
2026-08-07 02:01:18 +08:00
205d1591e8 feat(terminal): add disconnect/reconnect on workspace split status bar (#2769) (#2771)
* feat(terminal): add disconnect/reconnect controls on session status bar

Workspace panes could not reach tab-level reconnect. Expose disconnect
(without closing the pane) and reconnect beside the host info actions so
split sessions stay operable. Closes #2769.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): abort in-flight boot on status-bar disconnect

Disconnect keeps the pane mounted, so cancel's unmount cleanup never runs.
Flip isBootActiveRef (and isCancelling) so a late startSSH/startMosh attach
cannot resurrect the session after the user disconnects mid-connect.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): ignore stale start UI after status-bar disconnect

When disconnect aborts an in-flight connect, starter catch paths must not
reopen auth or repopulate errors. Gate SSH/telnet/mosh/ET/local/serial
failure UI on isTerminalBootActive and harden the boot effect awaits.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): hide disconnect/reconnect on compact popup terminals

Owned command popups use compactToolbar with a one-shot startup command.
Exposing reconnect there can re-run that command; keep the controls on
normal tabs/workspace panes only.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): use boot epoch so reconnect cannot revive aborted starts

Disconnect alone flipping isBootActiveRef is not enough: an immediate
reconnect re-arms boot, and a late startSSH from the aborted attempt can
still attach. Capture a boot epoch per attempt and ignore stale attaches/UI.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): do not let stale attach abort a newer reconnect

tryAttach failure for an expired boot epoch must close the orphan session
only. Calling abortSessionStartAfterUnmount() would force disconnected on
a reconnect that already re-armed boot.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): reject late host-key prompts after disconnect

Disconnect can land before pendingHostKeyRequestId is set. Auto-deny
onHostKeyVerification when boot is inactive or status is disconnected
so approval UI cannot reopen on an aborted pane.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): cancel wake and MFA when status-bar disconnects

Invalidate hibernation reconnect-wake tokens on disconnect so a late wake
cannot re-arm boot. Reject/cancel keyboard-interactive prompts for
disconnected panes and clear any already-queued MFA for that session.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): ignore stale SSH catch UI and password fallback

Check boot attempt currency before resetting reconnect UI state on
SSH start failure, and before launching key→password fallback after
disconnect so a replacement reconnect is not interrupted.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): guard stale SSH progress and host-key prompts

Ignore chain-progress callbacks from superseded boot attempts, and
thread bootEpoch through SSH host-key verification so a late prompt
from an aborted start cannot overwrite a replacement reconnect.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): correlate MFA and jump host-keys with boot epoch

Forward bootEpoch through jump-host verification and keyboard-interactive
prompts, and reject superseded MFA when the retained tab has already
started a replacement reconnect.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): keep replacement SSH session alive across stale starts

Skip closeSession for superseded starts while a newer boot still owns
the shared sessionId, and avoid clearing MFA wait state before the
attempt-freshness guard on SSH success.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): own shared sessionIds by boot epoch

Claim SSH/local registry slots with bootEpoch so a stale start cannot
overwrite a replacement, and make closeSession no-op when the payload
epoch does not match the live session owner.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): claim bootEpoch for all reconnectable backends

Pass bootEpoch through Telnet/Mosh/ET/serial starts, claim registry slots
the same way as SSH/local, and dispose displaced owners when a newer
boot replaces the shared sessionId.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): protect preload listeners and ET artifacts on displace

Defer epoch-scoped closeSession listener teardown until main confirms
ownership, and remove ET external-auth temp artifacts when a newer boot
displaces the previous registry owner.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): clean rejected Mosh starts and keep replacement listeners

Kill superseded Mosh/ET PTYs and auth temp files when claimSessionSlot
rejects, and never clear shared preload listeners on epoch-scoped closes.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): settle superseded boots and stop displaced log streams

Reject Telnet/SSH claim failures through Promise reject/failReuse instead of
uncaught EventEmitter/.then throws, and stop a displaced session's log stream
so a logging-disabled reconnect cannot append into the old file.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): keep woken runtime when disconnect cancels hibernate wake

Disconnect invalidates in-flight hibernated reconnects with keep mode so a
successful wake that already cleared hibernatedRef is not disposed into a
dead pane that can never reconnect. Unmount still disposes orphan runtimes.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): bind reused SSH shellPid only to the claimed session

Late PID discovery after Copy Tab reuse must not write onto a newer
bootEpoch that already replaced the shared sessionId registry slot.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): await plugin cancel cleanup and clear boot epochs on teardown

Track plugin start/cancel promises so Disconnect→Reconnect waits until the
external session finishes unregistering, and stop unmount teardown from
republishing boot epochs into the process-wide map.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): cancel SSH passphrase prompts on disconnect

Register a pending-boot AbortSignal for SSH starts, abort it (and session-
scoped passphrase requests) from closeSession even before a registry slot
exists, and filter/drop late passphrase modals by boot epoch / disconnect.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): close owned boot epoch and scope passphrase cancels

Capture the pre-bump epoch for disconnect/teardown closeSession so live
transports are not skipped by epoch mismatch, cancel only passphrase prompts
at or below that epoch, and revalidate boot currency after async passphrase
lookups before queuing a modal.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): tag Telnet auto-login and Mosh ready with bootEpoch

Emit bootEpoch on telnet auto-login and mosh:ready events so overlapping
Disconnect→Reconnect boots ignore cross-delivered callbacks meant for an
older shared sessionId.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): update disconnect assertion and cancel pending serial opens

Align the disconnect source regression with invalidateBootEpochForClose, and
abort in-flight serialPort.open attempts via pending boot AbortSignal so
Disconnect→Reconnect cannot leave a stale open racing the replacement.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(terminal): keep flow-pause leases on skipped epoch closes

Worker close:await previously cleared pause ownership in finally even when
the worker returned skipped for an epoch mismatch, dropping the live
replacement's lease. Only clear on non-skipped closes; epoch-scoped
fire-and-forget close similarly defers to onSessionClosed.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

---------

Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>
2026-08-06 15:47:20 +08:00
Netcatty-Bot 6bc65a43de fix(terminal): forward Ctrl+V for local clipboard image paste (#2760)
Local terminal paste with an image-only clipboard now forwards raw Ctrl+V into the PTY so nested TUIs (e.g. Claude Code) can read the OS clipboard. Text and file-path paste, and remote sessions, are unchanged.

Fixes #2758
2026-08-06 14:13:04 +08:00
61839acaca [Feature] System 面板增加 GPU / NPU 占用监控 (#2561) (#2768)
* feat(system): add GPU/NPU monitor tab when accelerators are detected

Probe nvidia-smi and npu-smi during System capabilities checks and show a
GPU sub-tab with utilization, memory/HBM, temperature, power, and compute
processes. Reuses the existing SSH exec + parse pattern (same approach as
open-source remote GPU monitors) without new dependencies.

Related to #2561

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(system): address GPU monitor Bugbot findings

- Use PowerShell nvidia-smi collector for local Windows sessions
- Keep GPU tab in loading state while listAccelerators is pending
- Render compute processes even when device list is empty
- Stop treating Ascend HBM usage rate (%) as megabytes

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(system): address Codex GPU collector review findings

- Wrap POSIX accelerator script with JSON.stringify so nested sed
  quotes cannot break outer sh -c
- Parse Ascend proc-mem whitespace-delimited table rows

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(system): show unknown GPU util/memory as -- not 0%

ResourceBar now treats null/undefined as unavailable, and the GPU
device cards pass through null metrics instead of coalescing to 0.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

---------

Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>
2026-08-06 11:44:08 +08:00
c3a7a4758b feat(settings): 支持一键清空所有会话日志 (#2738)
* feat(settings): 支持一键清空所有会话日志

在系统设置的会话日志卡片中新增清空按钮,删除保存目录下的
所有日志文件及主机子目录;操作前弹窗二次确认,完成后展示
删除/失败数量。

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>

* fix(session-logs): restrict clear-all to known log artifacts

Clearing the session logs directory no longer recursively deletes every
top-level entry. Only files matching Netcatty auto-save / export naming
patterns and host folders that exclusively contain those artifacts are
removed, so a shared Documents/Downloads save path cannot wipe unrelated
user files (Codex P1 on #2738).

* fix(session-logs): skip active auto-save streams during clear-all

Clear-all must not rm host dirs or log files still open by
sessionLogStreamManager write streams (orphan inode / silent stop).
Expose getActiveLogPaths and preserve those targets while still
deleting inactive siblings and pure host folders.

* fix(session-logs): preserve active snapshot-only host dirs on clear-all

txt/html streams may not create a file until the first snapshot, so treat
any active log path whose parent is the host directory as live work before
removing pure session-log folders.

* fix(session-logs): preserve worker-owned active streams on clear-all

Clear-all only queried the main-process sessionLogStreamManager, so
worker-owned auto-save files were invisible and could be deleted while
live. Union active paths from a running terminal worker via
netcatty:sessionLogs:getActivePaths, and skip cold-starting a stopped
worker.

---------

Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
Co-authored-by: bincxz <16399091+binaricat@users.noreply.github.com>
2026-08-06 08:54:03 +08:00
9a3d96be76 fix(ai): improve approval command readability and cancel idle timeout on review (#2734)
* fix(#2697): automated Cursor CLI fix

* fix: address Codex review on PR #2734

* fix(ai): keep MCP absolute approval deadline and Escape reject

Canceling idle review no longer leaves MCP approvals unbounded past the
external agent tool-call window, and Enter-only key stopPropagation lets
Escape still reject from Copy/Expand controls.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(ai): keep wrapped CLI target context on approval cards

Parse --session from netcatty-tool-cli wrappers into execution context and
still show invocation args when the pending card displays an unwrapped command.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(ai): surface Codex reason on pending approval cards

Keep agent justification visible in the execution-context strip and still
show extra invocation args such as commandActions beside the command block.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(ai): bound Catty approval cancel with absolute deadline

Keep Catty confirm-mode approvals from going unbounded after review:
cancelApprovalTimeout re-arms the creation absolute deadline (MCP-style)
so a late approve cannot outlive the original timeout/stream tool budget.

Also harden pending-card Enter: extract isNestedInteractiveApprovalTarget
so Copy/Expand (and other nested controls) never Approve Once via bubble.

* fix(ai): bound Codex approval cancel and unwrap CLI wrappers

cancelInteractionTimeout now re-arms the absolute creation deadline
(Catty/MCP style) instead of leaving review unbounded. Also treat
netcatty-tool-cli.cjs/.cmd as CLI wrappers so approval Command/Copy
shows the remote command after --.

* fix: address Codex review on PR #2734

* fix(ai): separate Catty approval idle timer from hard deadline

Review activity re-arms a full idle window from now instead of the original
absolute remainder, capped by a hard deadline (3x idle, max 30m). Stream
tool budgets use the hard deadline so mid-review approvals are not cut off.

* fix(ai): re-arm Catty approval idle and sync-deny hard deadline

Review interactions kept a one-shot timeoutCancelledRef, so later
cancelApprovalTimeout calls no longer re-armed idle. Remove the one-shot
and deny synchronously when the hard deadline has already elapsed so a
late approve cannot race setTimeout(0).

* fix(ai): re-arm approval idle on args-only scroll review

Pending approvals without a display command (Codex file-change/permissions,
write tools with JSON args) only show the overflow args block. Wire the same
onScroll/onWheel markReviewing path used by the command pre so continuous
wheel/trackpad review re-arms Catty and MCP/Codex idle timers.

---------

Co-authored-by: netcatty-bot <308658023+netcatty-bot@users.noreply.github.com>
Co-authored-by: bincxz <16399091+binaricat@users.noreply.github.com>
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-08-06 08:53:36 +08:00
bincxz 2433fbae47 fix(app-lock): mount terminal popup children before lock init
System Manager terminal popups receive config immediately after loadURL.
AppLockGate used to withhold children until async lock state resolved,
so onTerminalPopupConfig could miss the one-shot IPC. Force-render the
popup route and keep the last preload config for late remounts.
2026-08-06 00:49:56 +08:00
2ea5efacba fix(plugins): address residual Codex sync secret and backup gaps (#2748)
* fix(plugins): address residual Codex sync secret and backup gaps

Retain provider→plugin secret bindings so disconnect can wipe credentials
after a plugin is disabled, keep overwritten secrets on failed reconnect,
and snapshot live-empty sidecars in protective backups.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(plugins): restore overwritten sync secrets on rejected reconnect

Stash prior plaintext and SecretRef id on overwrite, restore them when
connect fails, and discard the stash after a successful reconnect so
saved provider credentials keep resolving.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(plugins): make sync secret overwrite stash opt-in

Only the syncPutSecret path stashes prior plaintext/SecretRef so ordinary
secrets.set overwrites do not leave credentials in process memory.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(plugins): host-own sync provider bindings and clear failed stashes

Move provider→plugin bindings into a dedicated DB table outside
plugin-writable secrets, validate provider namespace ownership, and drop
overwrite stashes when replacement writes fail.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(plugins): keep overwrite stash until restore write succeeds

Only drop the prior plaintext after encrypt+upsert succeeds so a failed
restore can still retry and recover the saved SecretRef.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

* fix(plugins): preserve overwrite stash across retries and prefix deletes

Do not replace an existing restore stash on later puts, and clear matching
stash entries when deleteByKeyPrefix wipes sync credentials on disconnect.

Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>

---------

Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: 陈大猫 <binaricat@users.noreply.github.com>
2026-08-05 19:44:35 +08:00
13fa68a720 feat(plugins): add sync providers and encrypted sidecar sync (#2713)
* feat(plugins): add sync providers and encrypted sidecar sync

Implement PR 8 of the plugin platform (#2269): namespaced sync Providers
with provider.sync, encrypted-object storage operations, WebDAV through the
shared storage surface, dynamic cloud provider IDs, and non-cascade sidecars
for sync:true plugin settings plus account/CRDT baselines.

Related to #2269

* fix(plugins): wire sync providers and sidecars into production paths

Close PR 8 integration gaps: dynamic plugin provider registry and
getConnectedAdapter createPluginStorage, WebDAV through EncryptedObjectStorage,
cloud payload collect/apply for pluginSidecars, and IPC/preload bridges.

Related to #2269

* fix(plugins): preserve WebDAV auth reuse and resourceId through EOS wrap

encryptedObjectStorageAsCloudAdapter now reports initiallyAuthenticated when
config exists (matching raw WebDAVAdapter) so getConnectedAdapter reuses the
cached instance, and preserves/refreshes resourceId from the backing adapter
instead of always forcing the default object key.

Related to #2269

* fix(plugins): address Codex PR 8 review findings

Carry pluginSidecars through merge/convergent uploads, lazy-connect before
object I/O with revision-aware writes, fail closed on sidecar collect errors,
expose connectPluginProvider, preserve remote timestamps, and drop deleted
installed-plugin settings from collection.

Related to #2269

* fix(plugins): close remaining Codex P1/P2 sync issues

Lazy stream cancel for inline sync reads, must-not-exist conditional writes,
three-way sidecar merge for local resets, validated apply path for settings,
and merge remote sidecars into convergent uploads.

Related to #2269

* fix(plugins): harden sidecar collect/apply and write verification

Preserve last-known sidecars when the host is offline, apply remote
deletions for installed plugins, force convergent upload on sidecar
divergence, verify plugin object writes, and pick plugin providers in
auto-sync startup checks.

Related to #2269

* fix(plugins): close remaining Codex sidecar/sync path gaps

Include sidecars in auto-sync payload and hash, keep explicit empty bundles,
fail apply when host is offline, require getCapabilities, and carry merged
sidecars into convergent local apply/upload decisions.

Related to #2269

* fix(plugins): close Codex P1 sidecar collect/apply/merge gaps

Treat null host responses as unavailable, persist collected settings into
the non-cascade table, retain decoded convergent payloads, use three-way
sidecar merge for deletions, and fail apply only on operational errors.
Also treat non-empty plugin sidecars as meaningful sync data and re-run
auto-sync when plugin contributions change.

Related to #2269

* fix(plugins): close remaining Codex P1 sidecar and provider gaps

Replay offline-cached sidecars before collect, keep explicit empty
sidecar fields after three-way merge, thread sidecars through convergent
conflict/downgrade materialization, keep gated-off plugin providers from
joining sync as connected, and rebind plugin EOS sessions after runtime
replacement.

Related to #2269

* fix(plugins): separate pending remote sidecars from last-known cache

Replay only host-offline remote applies into the DB, keep last-known as
upload fallback, use contribution reset for deleted settings, probe real
plugin host readiness, rebind storage events for plugin providers, clear
plugin bases on reset, and swallow disconnect rejections.

Related to #2269

* fix(plugins): hydrate retained sidecars and gate missing providers

Materialize installed-plugin settings from retained sidecars before
collect pruning, clear sidecars on setting reset, fail closed when
pending remote replay fails, and only restore plugin providers that are
contribution-available. Also initialize dynamic provider counters on
connect.

Related to #2269

* fix(plugins): surface plugin sync providers and preserve conflict sidecars

Collect live sidecars before convergent conflict apply/upload, include
dynamic providers in status and disconnect paths, and list plugin sync
providers in Cloud Sync settings for connect/disconnect.

Related to #2269

* fix(plugins): per-provider sidecar baselines and safer collect/UI

Merge convergent sidecars against each provider's own baseline, keep
retained settings in sidecars without unvalidated plugin_settings writes,
guard isConnectDisabled for never-connected plugins, and fall back plugin
provider labels/icons in the status popup.

Related to #2269

* fix(plugins): correct plugin provider discovery and sidecar reverify

Read nested contribution metadata for sync provider cards, gate empty-config
connects, enforce single-provider disconnect for plugins, and re-verify after
sidecar-only convergent uploads so baselines track the post-write payload.

Related to #2269

* fix(plugins): refresh sync provider availability from live contributions

Replace the contribution-available provider ID set when plugins change so
disabled or uninstalled sync providers leave the auto-sync ready set and
drop to disconnected with config retained.

Related to #2269

* fix(plugins): preserve sidecars in backups, pending queue, and migration

Attach last-known plugin sidecars to protective local vault backups, fail
operationally when pending/last-known storage writes are rejected, carry
sidecars through convergent migration publish, and reject trailing garbage
on encrypted object parse.

Related to #2269

* fix(plugins): abort conflict collect failures and merge migration sidecars

Rethrow operational sidecar collection errors during convergent conflict
resolution, LWW-union all local/provider sidecars during convergent
migration, re-collect last-known after apply, and prefer live host collect
for protective local vault backups.

Related to #2269

* fix(plugins): restore pluginBridge tests, fix import path, union downgrade sidecars

Correct SettingsSyncTab dynamic import path so production builds resolve,
add ipcMain.on to the plugin bridge test double, union all provider
sidecars on convergent downgrade, keep empty last-known resets, and skip
force-delete when contribution reset validation rejects.

Related to #2269

* fix(plugins): abort backup collect failures and honor empty remote wipes

Only fall back to last-known sidecars when the host is unavailable during
protective backups, treat explicit empty remote sidecar bundles as
authoritative wipes, remove lint-blocking anys from harness tests, and
use a stable equal-timestamp sidecar tie-break.

Related to #2269

* fix(plugins): include sidecars in equality, preserve merge base on reconnect

Compare pluginSidecars in cloudSyncPayloadsEqual for migration freshness,
clear plugin merge state only when account/resource changes on reconnect,
cancel accepted sync read streams on failure, and stop re-connecting the
plugin EOS adapter on every I/O.

Related to #2269

* fix(plugins): drop cached adapters on contribution refresh

Invalidate plugin sync adapters when live contributions change so a
restarted runtime gets a fresh connect, take offline any non-disconnected
missing providers, and latch version-change backups only after cancellation
checks pass.

Related to #2269

* fix(plugins): preserve omitted sidecars and hydrate on plugin enable

Treat missing pluginSidecars as legacy/unsupported in three-way merge
(only explicit empty is a wipe), hydrate retained settings when a plugin
enables, and re-enable retained provider configs when contributions return.

Related to #2269

* fix(plugins): keep newer retained sidecars over older stored settings

When collection merges existing sidecars with plugin_settings rows, prefer
the newer updatedAt so a schema-rejected remote value retained only in
the sidecar table is not overwritten by a stale local setting.

Related to #2269

* fix(plugins): seal plugin provider config and clear base on config change

Encrypt opaque plugin provider configuration before persistence, clear
merge state when reconnect configuration changes, and stream sync objects
below a base64-safe inline threshold so control-plane JSON stays in budget.

Related to #2269

* fix(plugins): seal plugin configs by provider id and hydrate before start

Encrypt plugin provider configuration only for non-builtin provider IDs
so field-name collisions cannot skip sealing, hydrate retained sidecars
before plugin enable starts the runtime, and stop tearing down live
adapters on no-op availability refreshes.

Related to #2269

* fix(plugins): seal scalar configs, safe inline reads, stable config fingerprint

Encrypt any non-builtin plugin configuration JSON shape, enforce the
base64-safe inline read cutoff, and compare reconnect configurations with
order-independent fingerprints so merge bases are not cleared spuriously.

Related to #2269

* fix(plugins): thread sync credentials and harden availability checks

Pass SyncConnectPayload.credential through the object-storage and IPC host
path, treat only null/undefined config as missing, and avoid wiping the
plugin provider availability catalog on transient discovery failures.

Related to #2269

* fix(plugins): unblock schema-required sync connect and scalar configs

Add a JSON config dialog for plugin sync providers that declare a
required configurationSchema, reuse retained configs on reconnect, and
treat falsy scalar configs as present in readiness and adapter lookup.

Related to #2269

* fix(plugins): rebind sync adapters on contribution refresh

Drop cached plugin sync adapters when live contributions still include
the provider so replaced runtimes get a fresh connect, and seal falsy
scalar plugin configs with nullish presence checks end-to-end.

Related to #2269

* fix(plugins): apply sidecars under current declared setting scopes

When a plugin update changes a syncable setting scope, write under the
live declaration and drop the obsolete scope row so collection does not
republish duplicates.

Related to #2269

* fix(plugins): seal config envelopes and stabilize provider counters

Use an unambiguous host-owned sealed-config envelope, initialize
dynamic-provider sequence counters before cross-window decrypt, keep
three-way sidecar deletions during convergent migration, and create the
sidecar table for existing schema-1 plugin databases.

Related to #2269

* fix(plugins): avoid mid-sync adapter drops and sidecar resurrection

Keep plugin adapters across setting-only contribution refreshes and
rebind sessions on ensureConnected; stop preserving local-only missing
plugin sidecars when remote already mentions the plugin; compare configs
with nullish semantics across windows; swallow quick-connect failures
after toasting.

Related to #2269

* fix(plugins): restore remoteKeys for installed sidecar resets

Reintroduce the remote key set used when dropping installed-plugin
settings the remote no longer carries so applyFromSync cannot throw
after replacing the sidecar table.

Related to #2269

* fix(plugins): honor conflict policy and re-key scoped sidecars

Pass preferCloud/preferLocal into three-way sidecar merge, use
per-provider baselines on convergent downgrade so local resets are not
resurrected, and re-key applied settings under the current declared
scope coordinates.

Related to #2269

* fix(plugins): keep strategy on final sidecar merge and block dual legacy

Pass preferCloud/preferLocal through the final verified sidecar merge,
avoid auto-reactivating a retained plugin while another legacy provider
is already connected, cache plugin adapters only after initializeSync,
and preserve explicit null configuration values.

Related to #2269

* fix(plugins): strip plugin avatars and protect last-known sidecars

Do not load plugin-supplied avatar URLs in the main renderer, and avoid
overwriting last-known sidecars with an unmerged remote bundle when the
post-apply collect fails or is non-authoritative.

Related to #2269

* fix(plugins): strip top-bar plugin avatars and stop always-rebind

Hide plugin avatar URLs in the sync status popover, drop always-on
rebindSession for plugin adapters, and read convergent mode from the
local config module when deciding whether to auto-reactivate providers.

Related to #2269

* fix(plugins): use window.netcatty for sync IPC and allow null configs

Read plugin sync and sidecar APIs from the production preload global,
and treat an explicit config property (including JSON null) as present
for readiness and adapter lookup.

Related to #2269

* fix(plugins): close residual Codex P2 sync edge cases

Three-way merge sidecars during v2 convergent migration so local
resets are not resurrected, preserve explicit null plugin configs on
adapter rebuild, rebind EOS sessions after I/O failure for replaced
runtimes, and accept the public inlineObjectBytes limit on readObject.

Related to #2269

* fix(plugins): keep inline read cutoff under control-plane budget

Restore the base64-safe inline cutoff so advertised-size reads cannot
overflow the 128 KiB provider JSON envelope; providers near the public
inlineObjectBytes limit must stream.

Related to #2269

* fix(plugins): harden sidecar empty-vault, hydrate LWW, and credential seals

Close remaining Codex/review gaps for PR8: keep empty sidecar shells from
bypassing upload guards, skip startup hydrate when local settings are newer,
seal/validate durable plugin credential refs, and cover schema 1→2 migration.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(plugins): rebind plugin sync sessions and keep null configs

Address Codex P2 on 8ae52c54: re-issue connect after runtime replacement,
and treat stored config:null as present in the dashboard reconnect path.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(plugins): defer empty sidecar last-known until sync succeeds

Keep prior non-empty last-known across an authoritative empty collect so the
empty-vault guard can still recognize a plugin-only reset, then commit the
empty cache after a successful upload.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(plugins): avoid restricted localStorage global in sidecar test

Bind the mock to a local binding so eslint no-restricted-globals stays clean.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(plugins): commit applied sidecar cache and reset orphan settings

Prefer merged payload sidecars when updating last-known after sync, and clear
syncable plugin_settings that lack sidecar rows on authoritative remote deletes.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(plugins): reseal marker-shaped plugin configs instead of skipping

Exact __netcatty_plugin_config_v1 collisions no longer bypass encryption; trusted
host envelopes are unwrapped then resealed, and false collisions are sealed whole.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(plugins): keep merged sidecars in last-known after apply collect fails

Return applyFromSync entries from IPC and use them when follow-up collect fails,
so preserved missing-plugin rows are not dropped from the offline upload cache.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(plugins): delete stale-scope settings at stored coordinates on reset

After resetSetting against the current declared scope, also remove the row at
the sidecar's stored scope so scope migrations cannot republish remote deletes.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(plugins): close sync-provider credential, stream, and sidecar gaps

Make SecretRef usable end-to-end via lease-bound network.request, keep
renderer/main transfers abortable and bounded, and stop sidecar
last-known/pending from corrupting backups and conflict apply.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(plugins): harden single-provider, secret schema, and conditional conflicts

Keep legacy restart from dual-connecting providers, extract writeOnly schema
secrets into OS storage, and surface conditional-write precondition failures
as conflict UI instead of a generic sync error.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(plugins): dedupe sync type imports for lint

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix: address Codex review on PR #2713

* fix(plugins): wait for sidecar host before version backup latch

Defer the one-shot upgrade snapshot until the plugin sidecar host is ready (or a short grace), and catch getDataHash failures so pending/baseline paths do not reject unhandled.

Co-authored-by: Cursor <cursoragent@cursor.com>

* fix(plugins): require sidecar grace before version backup

Always wait for contributions/grace tick before the upgrade snapshot, and only latch after a non-cancelled attempt so cleanup cannot suppress retries.

Co-authored-by: Cursor <cursoragent@cursor.com>

---------

Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: netcatty-bot <308658023+netcatty-bot@users.noreply.github.com>
2026-08-05 18:43:10 +08:00