* fix(ui): open AI silent sessions in an attach terminal popup
Tray jumps for hidden MCP sessions attach the existing terminal popup
to the live PTY instead of activating a tab-less main-window surface.
Output is rebound to the popup and restored when the popup closes.
* fix(terminal): register rebindOutput handlers under worker mode
Worker-enabled builds returned early from terminalBridge.registerHandlers
without registering rebind/restore IPC, so the first AI silent-session
attach popup always failed with "No handler registered". Register those
handlers in both paths and rebind display routing via terminalWorkerManager.
* fix(terminal): harden AI attach popup for worker mode lifecycle
Address codex review P1s: resume flow control before restoring output,
route exit/events to the rebound renderer, and replay home scrollback
via a snapshot request before rebinding display output.
* fix(terminal): restore attach routing on popup close and dual-notify exit
Hardening for AI observe popups: restore output from BrowserWindow closed
lifecycle (not only React cleanup), keep attach home for exit events so
main/tray lifecycle updates, and resume paused backend flow on attach.
* fix(terminal): resume flow on attach restore and close snapshot gaps
Resume backend output when attach popups are force-closed, fan out
lifecycle exit events to home+display in non-worker mode, and pause
during snapshot→rebind so live bytes are not dropped from the popup.
* fix(terminal): harden attach restore and worker lifecycle edges
Prefer live display for ZMODEM dialogs after rebind, dual-notify worker
crash exits to attach-home, and avoid clearing attach-home when restore
targets a dead renderer.
* fix(terminal): sync observe-popup state home and fan out SSH exits
Push popup serializations home before restore, fall back to hibernate
snapshots, settle briefly after pause for worker handoff, and dual-notify
SSH exits to attach-home owners in non-worker mode.
* fix(terminal): fan out exits for mosh/telnet/et attach owners
Use shared fanout for in-process protocol exits so attach-home and
display renderers both receive netcatty:exit under non-worker mode.
* fix(terminal): restore attach only onto main app windows
Avoid routing silent-session output to settings/prewarm windows when the
original home renderer is gone; fall back only to registered main windows.
* fix(terminal): harden silent session popup handoff
* fix(terminal): close observed popup with session
* fix(terminal): keep observe popup from reconnecting
* fix(terminal): preserve cleared observe snapshots
* fix(terminal): route transfer prompts to observer
* fix(terminal): keep context after observe restore
Always try password before keyboard-interactive for the first factor. After
any partial success, prefer keyboard-interactive when the server still allows
it so multi-factor/EDR second factors work without a per-host switch. Remove
the requiresMfa UI and "remember MFA" checkbox; keep secondary-prompt
protections and hostId-aware password save.
Default stays password-first for ordinary hosts. Hosts with requiresMfa
prefer keyboard-interactive so EDR secondary factors are not skipped.
Secondary prompts can suggest enabling MFA mode for that host.
Pass allowSavePassword=false for post-partialSuccess / EDR / multi-round
keyboard-interactive challenges so the modal cannot overwrite the host
login password with a secondary secret (Codex P2 on #2151).
* Add macOS Dock new connection menu
* Fix Dock menu window readiness
* Wait for renderer before Dock menu delivery
* Queue Dock host connects until vault ready
* fix(logs): preserve connection log terminal replay data (#1733)
Persist unsaved terminal replay buffers in a side store and merge on reload so pruned localStorage writes and cross-window sync no longer wipe captured session output. Also bind hotkey local terminals to sessionId and match captures strictly by session.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(logs): merge side-store writes and handle quota failures (#1733)
Fold existing localStorage terminal replay data before persisting the side store so multi-window writes do not clobber each other. Skip pruning the main connection-log blob when the side-store write fails so unsaved replay data is not dropped from disk.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(logs): retain orphan side-store entries across window sync (#1733)
Keep terminal replay buffers for log ids not yet present in this window's connection log snapshot, and warn when the main blob fallback write also fails under quota pressure.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(logs): gate orphan side-store retention on persisted log ids (#1733)
Only retain side-store replay buffers for log ids still present in the persisted connection-log blob, and write the pruned main blob before syncing the side store so deletions are not resurrected.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(logs): prefer fresher local data when retaining orphan replays (#1733)
When restoring side-store entries for log ids not yet in memory, use the merged local/ref snapshot instead of stale on-disk side-store bytes.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(logs): skip orphan side-store sync when main blob write fails (#1733)
Avoid resurrecting deleted replay buffers from a stale persisted log-id set when the pruned connection-log blob could not be written.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* feat: auto-poll Docker capabilities while Docker tab is active
When the Docker tab is visible and hasDocker is not yet true,
poll refreshCapabilities() at the process refresh interval.
Stop polling once hasDocker becomes true, or when switching
to a different tab.
* fix: use resolvedTab instead of activeTab for Docker auto-poll condition
The auto-poll useEffect condition used activeTab, which stays stale
when Docker becomes unavailable. Changed to resolvedTab which reflects
the actual displayed tab. Also updated the dep array.
* fix: replace setInterval with setTimeout recursion in Docker tab probe
Replace setInterval-based polling with setTimeout recursion in the Docker
tab capability probe effect. This ensures the next probe only starts after
the previous one finishes, avoiding overlapping probes when SSH timeout
exceeds the polling interval.
- Add dockerPollTimerRef to track the timeout handle
- Use async pollOnce() that awaits refreshCapabilities() before scheduling next
- Use cancelled flag in cleanup to prevent scheduling after unmount
- Keep same dependency array for correctness
* fix: stabilize docker poll timer by using useRef for refreshCapabilities
refreshCapabilities() can return a new reference on every render, causing
the useEffect to re-run on every render — cleanup cancels the polling timer,
then the effect immediately calls pollOnce(), effectively bypassing the
configured timeout interval.
Fix: store refreshCapabilities in a useRef (refreshRef), use
refreshRef.current() inside pollOnce(), and replace refreshCapabilities
with refreshRef in the useEffect dependency array.
Closes #PR1456 Codex P2 review item.
* fix: delay auto-poll first probe by one interval to avoid overlap with tab-switch probe
When switching to the Docker tab, two mechanisms were triggering probes:
1. tab-switch effect (line 67-76): immediate probe via refreshCapabilities()
2. auto-poll effect: pollOnce() executing immediately on mount
This caused duplicate probes that waste SSH channel resources.
Fix: pollOnce() no longer fires on mount. Instead, the effect schedules the
first probe with setTimeout(pollOnce, capabilitiesTtlMs), so the first probe
happens after one full interval. Subsequent probes continue at interval pace
via the setTimeout recursion in pollOnce itself.
The tab-switch effect still fires the immediate probe (the correct one),
so responsiveness on tab switch is preserved.
* fix: reset cancelledRef in effect body to prevent permanent stalling of Docker polling
The cancelledRef was set to true in the cleanup function when dependencies
changed, but never reset when the effect re-ran. This caused pollOnce to
always early-return on subsequent timer ticks, permanently halting
Docker capability probing after the first dependency change.
* fix(system-manager): replace cancelledRef with closure variables for per-effect cancellation
Each effect generation now has its own and closure
variables instead of shared / . This
prevents stale probes from surviving cleanup when the panel hides and
re-shows (Codex P2 review).
* fix: wrap refreshCapabilities in try/catch to keep polling on exception
If refreshCapabilities throws (instead of returning {success: false}),
the await would exit pollOnce without scheduling the next setTimeout,
silently killing Docker auto-detection polling.
* fix: add in-flight probe guard to prevent tab-switch and auto-poll concurrent probes
Add probingRef to track whether a capabilities probe is already in-flight.
- Tab-switch effect for Docker branch checks probingRef before starting a new probe
- Auto-poll pollOnce checks probingRef at entry and sets/clears it around the actual probe
- Tmux branch left unchanged as it has no auto-poll overlap risk
* fix: re-schedule next poll timer when probe is in-flight
When probingRef.current is true (tab-switch probe still running),
pollOnce was returning early without scheduling the next timer,
causing auto-poll to stop permanently afterward.
Now it schedules the next poll within the interval and returns,
so the polling loop keeps running until a slot where no probe is
active.
* fix: convert comments to ASCII-only English
- Line 105: translate Chinese comment to 'probe is in-flight, reschedule for next cycle'
- Line 113: replace em dash (U+2014) with ASCII dash
* feat: session inline rename, closeSession shortcut, pane zoom
* fix: sidebar inline rename with local state
* fix: add sessionDisplayName to terminalPropsAreEqual comparator
The Terminal component is wrapped with React.memo(…, terminalPropsAreEqual),
but the comparator was missing a check for sessionDisplayName. After renaming
a session, the pane title bar would show the old name until some other prop
changed and triggered a re-render.
Add prev.sessionDisplayName === next.sessionDisplayName to the comparator
so that display name changes cause the Terminal to re-render immediately.
* fix: add onStartSessionRename to TerminalLayerWorkspaceSection ctx destructuring and TerminalPanesHost props
* fix: add toggleWorkspaceViewMode to executeHotkeyActionImpl destructuring
The togglePaneZoom handler calls toggleWorkspaceViewMode() but it
wasn't destructured from getCtx(), causing a ReferenceError at runtime.
* fix: restore truncated ctx object in TerminalView render call
The TerminalView ctx object literal on line 1265 was truncated to
'showSele...' due to an editing tool truncation bug, causing
Parsing error: ',' expected on npm run lint / tsc --noEmit.
Restored the missing fields from the base commit:
showSelectionAIAction, snippets, status, statusDotTone, sudoHintRef,
sudoHintText: t("terminal.sudoHint.pressEnter"), t, termRef,
terminalBackend, terminalContextActions, terminalCwdTracker,
terminalPreviewVars, terminalSettings, timeLeft, toast, zmodem
Kept the PR's new additions (isVisible, onRename, sessionDisplayName)
intact.
* fix: add toggleWorkspaceViewMode to executeHotkeyAction context and add terminal.menu.rename translations
- Add toggleWorkspaceViewMode to the context getter in executeHotkeyAction (App.tsx)
- Add terminal.menu.rename translation for en (Rename), zh-CN (重命名), ru (Переименовать)
* fix: validate focusedSessionId before closing in closeSession hotkey
When closeSession hotkey fires, workspace.focusedSessionId may reference
a session that was already closed by another trigger (e.g., mouse click
on tab close button). Collect alive session IDs from the workspace root
and fall back to the first living pane if the stored focusedSessionId
is stale.
* fix(auto-poll): check useSessionCapabilities probing state in pollOnce
When auto-poll timer fires before the initial probe (from
useSessionCapabilities) completes, probingRef.current is still false
because the initial probe doesn't set it — causing a second overlapping
probe.
Add check so that any in-flight probe from any path
(initial/auto-poll/tab-switch) prevents auto-poll overlap.
PR #1459
* fix: address remaining Codex review issues
Co-authored-by: Cursor <cursoragent@cursor.com>
* feat: add detach session from workspace with toolbar button and context menu
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix: use customName in pane header display name for renamed sessions
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix: refine workspace terminal detach interactions
* fix: preserve workspace detach tab ordering
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Allow the quick switch shortcut to close the panel when pressed again,
including while the search input is focused, so users are not limited to
clicking outside to dismiss it.
Closes#1355
Co-authored-by: Cursor <cursoragent@cursor.com>
Fixes#1375 by letting Cmd/Ctrl+[1...9] target only work tabs when enabled, while keeping the existing Terminus-style default.
Co-authored-by: Cursor <cursoragent@cursor.com>
Adds a tab context menu action to duplicate a terminal into an independent peer window, with per-window active-tab titles and multi-window lifecycle safeguards.
Resolve 'et' protocol in tray panel and host connection handlers with
priority over mosh. Propagate etEnabled through session factories and
useSessionState. Expose etAvailable guard and startEtSession wrapper
in useTerminalBackend.
Issue #1099: a Telnet host shows the protocol picker on every connect. Connect resolution is now explicit, and the picker only appears when it's genuinely a choice:
- Telnet set as default (protocol = telnet) -> connect Telnet (single-click and batch)
- Telnet enabled but not the default -> show the picker (unchanged)
- Mosh enabled -> connect Mosh
- otherwise -> connect SSH
A "Connect with Telnet by default" switch in the Telnet card sets the host's primary protocol. SSH+Mosh hosts now connect Mosh directly instead of prompting every time. Addresses part 1 of #1099.
Refs #1099
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>